How to Install Roof Shingles 

to the point, no bs intros or request to like and subscribe, just what i needed guys i appreciate it.

This summarizes about 15 other videos I watched, and is shorter than any of them. Great info and well presented!

" ... shot down...next row...shot down..." 🎵 dropping some lines 👌🔥lit

Great video. Clear, concise, no wasted time talking about unrelated crap that nobody needs to hear, no annoying background music. Great job and I'll be following your tips soon on a shed I'm building. I've shingled a house and a shed before, but it's been 15 years, so this is a great refresher. Thank you.

Best roofing tutorial ever. Thank you so much!

The guy who came to clean our gutters mentioned TO MY WIFE AND MOTHER-IN-LAW that I improperly installed the singles on our garden shed - Ha. After watching this video, I see that I messed up at every single step. Your wonderful, concise and complete video will help me regain hero-status at my house. Thank you so much !

Great video. Clear instructions, plenty of details and highlighting techniques like drip edge wrap.

I am a homeowner with a day job who does not do anything construction related for a living. That being said I am working on framing out my basement and Bought this ru-vid.comUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt gun. I have done a few walls already, have probably shot a couple hundred nails through this thing and have yet to have a misfire. It works awesome, good depth on every nail if you have your compressor set right. My literal only complaint is that it is a bit heavy and my arm can get a little tired especially whrn I am nailing at odd angles. That being said I am super happy with it and would buy it again. Hoping the old girl allows me to get my whole basement finished out!

Thanks for this video, I'm pretty handy but I've never done a roof before and it's nice to see I was on the right track

Welll done, young man. Your attention to detail is impeccable 👍

Thanks just needed a refresher, been awhile and about to reroof my house 👍🏽🇺🇸

Drip edge is installed on the eave first, then underlayment/ felt. The drip on rake edges is installed AFTER the underlayment.

You all did a great job. Straight to the point. I’ll follow your tutorial. 👌🏾

Very cool. thanks! Helped me a lot for redoing ny shed roof.

Thanks, that was helpful. I’m going to build a shed and am a beginner.

Thank you so much for this video. I am rebuilding an awesome shed. It is 10’x16’ with a garage door. The roof was damaged a long time ago. The shed sat for ten years with a bad roof. I completely disassembled the roof and was able to keep the drip edge pieces. I had to scab in a bunch on the trusses, and have new wood down but have never built a roof in my life. With this information I can confidently finish my roof. Thanks again.

Came to the comments to see what all the 'experts' had to say. I was not disappointed.

Great video!!! Right to the point.

Thanks for the Detailed. Awesome steps 👍👍👍

Thank you so much for this, it was great!

Thank you for explaining step by step how to cut the shingle. I am a female and I wanted to learn to help my mother on her roof. I like to learn all sort of things when it comes to fixed it yourself.

Thank you for the content. I just bought a chicken coop for my ladies and I need to install shingles. I appreciate you. 🐓🌞🥰

In the U.K. we don't have roofs like this that I'm aware of so this was super interesting to me. Thanks for the upload, explanations and close ups etc.

Loved how this was shown. It is very helpful, because I have a roof repair that needs to be done eventually.

Men what a video simple to the point full of gems

I work in roofing for more than 10 years and for different companies and every buddy wants something different this day’s most of the companies like to use ice and water shield , also the overhead on the metal drip some people like 1/4-1/2-1/3

I so appreciate this video, specially the staggering of shingle tips! Thank you!

i’m hoping this video will help me. i’m going to install my first roof today for work, on a shed. and i’ve never done it before so i figured i would try and find a video on it, seems like you did it very well, good job!

Wow. I hope these guys are in the Denver boulder area. They must produce a lot of easy repair jobs

Very informative, great work!

You should definitely keep making these videos. You’ve got people from all sorts of various trades not to mention customers looking at this.

Dude!! Respect. thanks for the lesson.

Straight to the point! Awesome

You've already messed up. The drip edge of the rake or gable end should go over top of the felt so that any wind driven rain that got under the shingle would stay on top of the felt. The way you did it, the rain would go between the felt and the drip edge and right onto the osb and cause it to rot. The drip edge at the bottom or fascia is correct as the felt would go over top of it.

Amazing video! Thank you😊

Incredible job guys

your a good teacher thanks

Thanks, I am glad I found this video.

Great video! Thank you for that!!!

We do ice and water barrier on the roof edge in Minnesota. Runs 3 feet across up the edge. Protects from water leaks and ice dam build up. It's basically tar in a fruit roll-up type plastic and it's really heavy. One tube is 90 lbs. Yeah I used to be a roofer.

No mention of the direction of the ridge cap based on predominant wind direction or if the ridge ties into another roof line. And I agree with the other comments on drip over felt on the rake edge. In my state, ice and water shield is required at the eve edge two feet pass the interior wall.

Felicidades muy bien explicado bonito trabajo saludos desde tijuana mexico

I will be doing my own roof tomorrow, thank you

Thats cool how you guys are playing roofers

I'm a restoration contractor with some great subs for roofers,but damn. Like that drip edge corner.

Of all the many job's I had throughout my life, I certainly do not miss "Roofing"...

Nice video keep posting more 💪🏻😎👷‍♂️

Great video guys You help me a lot I appreciate it

perfect explainer, thanks!

Very well done 👍🏼

Nice job guys.

And yes, very informative and explained video tutorial. God bless you and your family and business.

Reminds me of this goof I worked with in my 20’s. He just couldn’t understand how to sidewall shingle. We would build mock-up panels like this for him to practice on.. he never did figure it out and now he teaches high school shop class lol.. seriously.

Excellent video , after watching this i build the roof my chicken coop the same way.

Very helpful and well done job

great video, this is the way we roofed for 100 years or so, all this new tech is just adding to the cost. you still only get 20 to 25 years with the new crap.

Thank you for helping me. I am a first time homeowner and needed this to understand roofing😁. You are appreciated.

Realllyyy proud to see youngens actually making a honest living....inthought that the felt paper goes around the show rafter N the fascia board...as a weather sealer...then the edging ges on ( the edging bonds to the striping of the adhesive of the starter strip.....?the felt paper does never adhere to the drip edge?... that's YYY the paper gets ffolded onto the fascia W the show rafter ???? I DO LIKE HOW UUUU N FORTIFIED 45'D THE EDGING on the fascia side then butted the edging on the rake.....THANK U TONHAVE SHARED THAT....

EXCELLENT VIDEO!!!

good simple video. thanks

I have to say . While getting bids to get my roof done. A few contractors told me I needed a tear off. Showing me the two layers of roof . Saying in Calif . Your only allowed 2 layers . Well I knew better . I was amazed . Be carful. This is great advise. Thank you

I am not a pro-roofer but had done a lot of roof repair over the years, also installed new a old. Every body had done differently. My solution is to prevent water from getting to the underlayment, to me there's no right way or wrong way( ..well to some degree) as long as you know what you are doing.

thank you for making this video

it's cool to see how another coutry work

Damn this was really helpful

Is a great video thank you is going to be very helpful for me

Thankyou for the great information

Thanks! Cool video

You should mention if you’re shingling in northern areas where there’s snow you need to use Wintergard on the bottom edges and also you can put that along the rake which sticks to the wood so you don’t get ice buildup under the shingles. In most places where there is winter weather if you don’t use Wintergard it will fail inspection.

Your felt is suppose to go under the drip edge metal along the rake/gable ends. Only time the felt goes over the drip edge is at the eaves.

Excellent video. Looks like you do great work.

GOOD JOB GUYS!

Great video. To the point . Drip Edge corner construct would be better had it not been sped up.

amazing. Thank you. you video was just user as reference for a shingle installation simulation game.

Helpful, thank you

Good video guys thanks

Thanks guys ! 👍👍👍👍👍

Good work 👏

That helped me out so much thank you

Thank You Sir!👍

Great video

Best video ever 100%

Thanks for the super speed option.

Well made video.

Very useful info 👍👍👍

Thank you for sharing :)

Thank you for shared

Very self explained 👌

Very nice interesting vlog

THANK YOU FOR TAKING THE TIME TO MAKE THIS VIDEO! VERY THOROUGH!!

Thank you so much.

Nice !!! 👍🏻👍🏻

Thank you i am placing shingle in my dog house this help a lot Before no idea 🤷🏻‍♀️ a ( grand mom)

This is the best instructional video i have ever seen about anything.

Este video es oro gracias 🫂😮👍

Wooooooa excellent teaching

Wow! Thank you

Need more of the class room videos!

Thanks so much Latinos for this video show

Don't know much but for me great job and experience thank you