Watch our in-depth installation guide for our Fixed Mounting Built-In Fridge and Freezer Combination. Each step is displayed in a clear and easy to follow manner. #whereinnovationlives #samsung
NOTICE AT 23:08 DO NOT INSTALL THE BOTTOM BRACKETS ON TOP DOOR AS SHOWN IN THIS VIDEO IF YOU HAVE HANDLESS J PULL DOORS!!! These type doors are very thin at this point and the screw will go straight through damaging your door. You need to discard the plastic trim and turn the bracket upside down and tuck behind door and mark around bracket with pencil. You will then have to take door off again to screw brackets to the door before mounting door again
Great video. I managed to install the Samsung in a Kvik Prato kitchen. Some tricky stuff with aluminium decoration strips in combination with the bracket on freezer door. Both needed to be at the same height, creating a 2mm depth to the front of the freezer door compared to the fridge door. Some fine tuning should smooth this out a little bit. Thanks for uploading.
So I have a question I am buying a 70/30 fridge/freezer of 1.77m in total with fridge of 1.25m and a freezer of 0.52m. What my outer doors should be? Is it ok with a 1.28m fridge and 0.66m freezer?? Please help as I am struggling to find a solution
Ясно одно. Размеры, указанные в инструкции по эксплуатации, которыми следует руководствоваться при расчете мебельных фасадов, не соответствуют действительности...