How to Install Schlage BE 365 Pushbutton Deadbolt Lock

Подписаться 39 тыс.

Просмотров 43 тыс.

50% 1

How to Install Schlage BE 365 Pushbutton Deadbolt Lock. Set up for Schlage keyless push button dead bolt locks.
Please Click The Subscribe Button Below And Share Video With G+, Facebook, Twitter and all Your Favorite Social Media!
Comments and questions are encouraged but please be respectful.
Visit wayneslockshop.com/ For More tips and tricks for the Locksmith Industry
tricountylocksmithservice.com/
All views and opinions are the alleged interaction with any product shown and not a fact stated by Wayne Winton and or Tri County Locksmith Service. The information shown in any video is 100% opinion of Wayne Winton and protected by the 1st amendment, the freedom of speech. Some products may be provided by the company being reviewed and others are purchased independently by Wayne Winton, Tri County Locksmith Service. Either way it does not reflect the content of the review. All products are given a fair equal chance to perform. All videos are property of Wayne Winton and all rights are reserved. If you would like to post any video please contact Wayne Winton at: Tricountylocksmithservice@gmail.com for permission.
Disclaimer: Do not try this at home! Any content seen here is for entertainment only! Do Not try anything seen here yourself or there may be danger of bodily harm or legal consequences for your actions! Any illegal activity is prohibited and Wayne Winton and or Tri County Locksmith Service are not responsible for your actions!
Wayne Winton, © 2014. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Wayne Winton. Please note that Wayne Winton, Tri County Locksmith Service does not state any confirmed facts only personal opinions. I am not directly affiliated with any of the vendors or manufacturers in this video. Wayne Winton, Tri County Locksmith Service is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the Wayne Winton, Tri County Locksmith Service film series broadcast on RU-vid is intended for entertainment purposes only.
Tri County Locksmith Service
1338 Grand Ave
Glenwood Springs
Colorado
81601
970-945-5625 970-963-5625 970-922-5625

Опубликовано:

18 окт 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@paulapeace1 Год назад

I can’t thank you enough for this video. I did it wrong the first time and had the error. After watching your video, I fixed the problem. Thank you again!!!!!!!!

@lowlandlace425 5 лет назад

Thank you for the video. We purchased our locks a year ago. We are renovating. We wanted to give a code to each contractor instead of a key. However, we delayed installing because our to do list was huge and the instructions looked complicated. However, after watching your video we realize it is easy. Feel a little silly. But we were incredibly busy and overworked. This video gives us confidence to install all the locks today and check another thing off our list! Have a good one.

@randibodnar4500 2 года назад

THANK YOU!!! I have no idea how my lock came to malfunction when it worked perfectly for years, but suddenly you could open it from the outside with just the Schlage button. You reinforced EXACTLY what the issue was and I fixed it in a matter of minutes. I am eternally grateful; thought I was going to have to fully replace the lock.

@lucondon5942 3 года назад

Thanks so much for the video. I had put everything in correctly but when the key face turned in circles I took it all off and went through the steps again thinking I missed something. Your video cleared that up for me. Very grateful people like you take the time to put things out to help others.

@fiouable Год назад

That plastic thing. Thank you. I thought it was for protection during shipping. I removed it and was about to discard it. It’s back on and will help for the installation. Thank you again.

@sk-wx1cf 4 года назад

This was more helpful than the manufacturer's video, especially the part about the bolt being engaged/disengaged when the code is pushed. I thought mine was malfunctioning because the thumb know would just spin without engaging, so this information helped. However, I wanted to see the part with the key, too.

@midvale5thyear Год назад

Thank you for sharing your expertise. Saved me a ton of time.

@JBsC6 4 года назад

Thank you for your easy to follow instructions.

@nancygoldtrap6540 4 года назад

Thank you for this video. I think this ol lady can do this! You made it look so simple.

@felixlarranaga7513 Год назад

Verry helpfull video man thank you so much for your video

@Sreenivas20064u 2 года назад

Thanks man. Super helpful. I couldnt find the information you shared in the end anywhere else

@marylut6077 2 года назад

Thanks, appreciated the tips on lining everything up and how to stuff wires inside

@patriciahoge1759 Год назад

Thanks for the video!

@dameien 11 месяцев назад

Thx exact information….. Great job!!!!

@Durtsche 6 лет назад

+Wayne Winton Thinking about purchasing, but not sure my door meets spec. Any idea why does it require a 5 1/2" distance between center of deadbolt hole to any lower latch hole? It seems like even with the frame of the lock, there is still room for say a 4" distance.

@tek2313 5 лет назад

Thanks man you are the best

@PapaGleb 8 лет назад

Great vid. Very informative. Thx for sharing.

@PapaGleb 8 лет назад

These tech locks will soon replace all standard pin tumbler locks so I'm interested in learning as much as I can before that happens.

@Jamestube8439 4 года назад

What is that board called that you used to install the lock, I might want to get one.

@isabellesender Год назад

Thank you!

@doritpittman8494 6 лет назад

Great demo, thanks

@waynewinton 6 лет назад

THX

@jamesreid9762 7 лет назад

Excellent video Wayne thank you! I unfortunately did not align that center cam to the arrows so when I pressed the Schlage button it would unlock the door lol. This video was extremely helpful.

@pfunk1380 6 лет назад

James Reid your vid cutoff right at the part I was havibg trouble with!!! The key won't unlock the door! I have everything else working

@pfunk1380 6 лет назад

Oops sorry James...wayne

@emmalinares5610 4 года назад

I need to add the code to open and close this please explain to me step by step. Thank you

@brianbuccellato1532 2 года назад

Thanks!

@GeorgeLopez-rb5ih 17 дней назад

Ok si en el primer paso dice q está colocada correcta mente porq no ace el segundo paso

@jeremyleblanc1930 4 года назад

this may be a dumb question but why doesnt the keypad and lever sit flush with the door?

@mikeydesilva8197 3 года назад

Cheers bud.

@garydonahue4804 5 лет назад

OH NO! The video cuts off right where I needed the info about using the key override. Everything works on my BE365 except when I want to use the key. The bolt handle just spins around and won't unlock the door. I turned it 90 degrees and pushed in but nothing works. Any suggestions?

@Macnificent78_ 5 лет назад

I'm having the same problem

@mzleeta 5 лет назад

I think you should how to program the key pad.

@tomhufnagel6812 3 года назад

I noticed a small gap between the keypad housing unit and the door surface. Shouldn't this fit flush? If not does it need to be caulked?

@joellarry71 3 года назад

Not sure if you guys gives a damn but if you are bored like me during the covid times then you can watch all the new movies on InstaFlixxer. Been binge watching with my brother for the last weeks xD

@reginaldrocco7906 3 года назад

@Joel Larry definitely, I've been using instaflixxer for months myself :D

@GeorgeLopez-rb5ih 17 дней назад

Cual es el codigo a de usuario

@jimgrathoff9944 8 лет назад

easy to Rekey to match other schlage sets in a house?

@waynewinton 8 лет назад

yes

@mr.berries4060 4 года назад

Nice video, good beard

@nabibestcat123 6 лет назад

when I try to lock it with the keypad, I followed the instructions exactly the same way but the thumb lock keeps on spinning? it doesn't turn the deadbolt even if the lock accepts the code. I'm not sure what I'm doing wrong, can anyone help?

@dritakalaj5691 5 лет назад

hi i came on to get some help also . mine is doing same thing. did you figure out how to solve it?

@po123gsxr 3 года назад

The key comes to a point where it is all aligned and will push in to engage the locking mechanism

@pfunk1380 6 лет назад

Wayne everything works fine except the actual key! I got everything to work out great but your vid stopped right when you were demonstrating the key!! Please help

@pfunk1380 6 лет назад

Nm... Got it... Didn't realize it pushed it

@waynewinton 8 лет назад

Visit wayneslockshop.com/ for more information Tips and Education