Тёмный

How To Install SS Brembo Brakes On A V6 Camaro Walkthrough Step By Step Installation Guide 

Chris Holt
Подписаться 842
Просмотров 5 тыс.
50% 1

Ever wanted more out of your standard V6 brakes? Me too! I sourced these used Brembo brakes off of another camaro, but an SS one and used them on my car which is a V6. I walk through all the steps from start to finish on what it takes to swap out your standard V6 brakes to the bigger Brembo brakes that come standard on SS models. Through the process I realized how surprisingly easy and rewarding the upgraded brakes are over stock. Switching the brakes out didn't take too much work and if you have any additional questions that I was unable to answer in the video feel free to leave them in the comments down below as I read every single comment and try to respond to each and every one. Make sure if you enjoyed the video to leave a like and if you're new here consider subscribing as I post new videos at least once a week, so if there is anything that you want to see just let me know in the comments down below.

Авто/Мото

Опубликовано:

 

28 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 61   
@PoppaReaux
@PoppaReaux 2 года назад
I finally have all of my parts. I’m about to do my brake upgrade today. I’ll be using this as a reference. Thanks so much for the video!
@chrisholt360
@chrisholt360 2 года назад
Of course enjoy the new setup you won’t be disappointed!!!
@SubieShakedown
@SubieShakedown 3 года назад
Nice work man, I am really liking that green 😍
@chrisholt360
@chrisholt360 3 года назад
Thank you so much I’ve got a decent bit of camaro content coming here in the near future but the subie has some parts on the way too!
@Convertible
@Convertible 3 года назад
Dropped a sub, looking forward to the content!
@chrisholt360
@chrisholt360 3 года назад
Thank you really appreciate it!
@vida_en_ruedas
@vida_en_ruedas Год назад
Nice video bro 👌
@chrisholt360
@chrisholt360 Год назад
Thanks I hope it helped show how easy it is to do the swap 💪
@alfamods2.0T
@alfamods2.0T 2 года назад
I’ll sub bro just started a modding 5th gen DIY channel as well
@chrisholt360
@chrisholt360 2 года назад
Thanks dude I hope you like your modification journey like I have so far
@trulyblessedziiz1030
@trulyblessedziiz1030 3 года назад
Good video. What year was the SS that the calipers and rotors came of?
@chrisholt360
@chrisholt360 3 года назад
It was also a 2010 but I believe that 2010-2015 are all the same brakes and full system if I’m not mistaken
@game_trucker7375
@game_trucker7375 3 года назад
I think you should look into a ss brake master cylinder it’s a necessity for the up grade
@chrisholt360
@chrisholt360 3 года назад
Have you driven with the V6 master cylinder and then switched to the SS master and noticed a big difference?
@pinballer1
@pinballer1 Месяц назад
what size were the front rotors compared to the stock one for your v6 Camaro
@cekoe0649
@cekoe0649 11 месяцев назад
I have a 2016 Camaro rs . Is it the same process?
@kylefraser4280
@kylefraser4280 2 года назад
I read on camaro5 that the rear parking brake sensor, or abs sensor or something won't work when swapping. Did you experience any of this. And what year is yours. Mines a 2012 2lt rs
@chrisholt360
@chrisholt360 2 года назад
It went over just like it did in the video easy and smooth no such problems with a parking brake sensor or abs sensor it works really well without issues on my 2010 1LT
@dallasjoe
@dallasjoe 8 месяцев назад
Ddid you have any tmps problems the swap ?
@luissaavedraleiva4663
@luissaavedraleiva4663 3 года назад
Gracias amigo saludos desde Chile haré la actualización pronto
@davoninetimes3219
@davoninetimes3219 Год назад
hey did you reuse your old calipers bolts both front and rear when you installed the v8 calipers ?
@chrisholt360
@chrisholt360 Год назад
I did reuse mine but you probably should use new bolts but I’ve had no issues with mine
@guillermopadres5223
@guillermopadres5223 3 года назад
Can you put a link of where u got the new brake lines please
@chrisholt360
@chrisholt360 3 года назад
Of course here’s where you can pick them up at smgspeed.com/product/goodridge-10-15-camaro-ss-brake-lines/
@AntChiulli-Chiulli_RS
@AntChiulli-Chiulli_RS 11 месяцев назад
i have a camaro 2023 my brother got a 2022 wrx
@reklessgameing2671
@reklessgameing2671 Год назад
Would this work for the new 2020+ LT1 ? Did your e-brake work fine?
@chrisholt360
@chrisholt360 Год назад
My e-brake worked fine I’m not sure if it would work on a 2020 LT1 as it’s a 6th gen versus a fifth generation but I bet if you got brembos from a 6th and did the swap it would work for ya
@mesaillusions101
@mesaillusions101 2 года назад
I got some brembos off a 2010 ss and I have a 2012 v6, I’m wondering if I need a caliper relocation bracket?
@chrisholt360
@chrisholt360 2 года назад
Sweet dude good for you! I highly doubt that they would be any different so other than cutting the rear shield I doubt that you’d have anymore work to change from V6 to SS
@mesaillusions101
@mesaillusions101 2 года назад
@@chrisholt360 is there anyway to remove the Shield other can cutting it?
@chrisholt360
@chrisholt360 2 года назад
I believe yes but I think that you’ve gotta change it for an SS one which doesn’t have the lip
@masoncarol8991
@masoncarol8991 2 года назад
Do you have to do the new brake lines
@chrisholt360
@chrisholt360 2 года назад
I definitely would the lengths are a bit different between the stock V6 ones and the ones from the SS
@luisiton2976
@luisiton2976 2 года назад
do you think 18s oem rims will fit? or ill need spacers?
@chrisholt360
@chrisholt360 2 года назад
I doubt even with spacers that you can fit 18s my 19s with spacers barely fit I would highly recommend just going up to 20s and then not having to worry about it at all
@bignasty1ish
@bignasty1ish 2 года назад
@@chrisholt360 I have 20in and for some reason I needed spacers
@thatsit5110
@thatsit5110 3 года назад
You think the ss caliper would fit the v6 version?
@chrisholt360
@chrisholt360 3 года назад
Mine is a V6 if you’re asking if the ss calipers would bolt up to a V6 rotor unfortunately not you’d have to get new brake lines and new rotors to go along with the calipers but that’s it
@gittyupalice96
@gittyupalice96 2 года назад
@@chrisholt360 I used to have a 2002 35th anniversary camaro, and the hilarious thing was the corvette stingray 6 piston calipers and rotors would bolt right onto the car with the only tool needed being a drill lol. Only thing that sucked was if you buy them brand new they wack you with a $600 core charge for the front two.
@spoozed-2720
@spoozed-2720 3 года назад
where did you buy them and how much were they
@chrisholt360
@chrisholt360 3 года назад
I actually bought them off of an ss that was upgrading to zl1 brakes and I got them for right around $400 with rotors calipers pads and the stainless steel brake lines most takeoffs you can find for around $600 for the set but if you do some digging you can find them for a better deal like I did!
@edgartinoco2727
@edgartinoco2727 2 года назад
Did you switch to a ss master cylinder?
@chrisholt360
@chrisholt360 2 года назад
I actually did not I stuck with the V6 master cylinder and it’s been totally fine for me if you were planning on tracking your car a considerable amount then I might but the braking confidence and feel of the new SS brembos are way better than standard brakes
@ElOjoNinja1
@ElOjoNinja1 2 года назад
Friend do you know if they remain with the original wheels?
@chrisholt360
@chrisholt360 2 года назад
I am not too sure. I have 19 inch wheels and I am able to run them without clearance issues but I haven’t tried them with the stock wheels and tires
@ElOjoNinja1
@ElOjoNinja1 2 года назад
Hey bro!, the problem has solved! Fit with the original wheels! Only need 1 spacer.
@chrisholt360
@chrisholt360 2 года назад
That’s awesome! Do you happen to know how thick the spacer needs to be?
@ElOjoNinja1
@ElOjoNinja1 2 года назад
@@chrisholt360 yes bro, only 0.326
@questune6560
@questune6560 2 года назад
What size are your wheels cause I have 19” inches
@chrisholt360
@chrisholt360 2 года назад
I have 19s as well and as long as you have enough of a spacer and don’t run the brake pad weights you should be fine running most 19 inch wheels
@SpideyPL16
@SpideyPL16 3 года назад
Hey, which wheels do You have? 20" or 19"? Cause somesay at 19 IT wont be engough Space for calipers but some do this anyway
@chrisholt360
@chrisholt360 3 года назад
I do have 19s and I heard the same thing and I was kind of stressing that it wouldn’t fit but with my wheels being deep clearance wasn’t an issue I have yet to even try and throw on my stock 19s to see if they will clear but mine are 19s and they work. If you’re getting aftermarket wheels I would recommend going with a 20 inch wheel for looks and clearance
@austin9570
@austin9570 3 года назад
If your Camaro has a electric parking brake I believe 2016 and up this won't work you have to steal the whole rear end off a ss or pay brembo 10k for customer rears but they won't promise you won't run into problems I have a 2018 and it's been rough I'm honestly about to trade it back in
@chrisholt360
@chrisholt360 3 года назад
Yea I think the 6th gens are all that way sadly I am just glad the swap on the 5th gen was so easy. Any idea what you’d trade it for?
@austin9570
@austin9570 3 года назад
Really it depends on what happens with the EPA if they get what they want then probably a older ss or ZL1 if I can find one in good condition if they don't win I would love to get a older v6 and completely build it so it's a sleeper there's alot of hellcats and Hondas around my area that I would love to pick on lol
@chrisholt360
@chrisholt360 3 года назад
Ooh those are some very solid choices 💪
@AntChiulli-Chiulli_RS
@AntChiulli-Chiulli_RS 11 месяцев назад
u need to specify if it’s for a 5th gen or a 6gen not doing so gets the other generation to click on the video and shows it’s not really to help us but for views
@yojimbokuratsu
@yojimbokuratsu 3 года назад
Why didn't you take off the brake dust shield backing plate, cut it, sand the edge and then treat it with a primer and rust protectant lacquer? That thing is going to rust out now. You saved a couple of hundred dollars by not buying new backing plates, but in the long run those plates are going to rust away.
@chrisholt360
@chrisholt360 3 года назад
Honestly the route that I went I’ve seen done on many other brembo upgrades and my car is garaged it rarely gets driven if it’s raining and never if it snows and I also live up in the Pacific Northwest so I’m not too worried about it rusting away at this point but it is something that I will monitor as time goes on and address it if it comes to that point
@erickmurillo6496
@erickmurillo6496 3 года назад
Look at all that rust bro
@chrisholt360
@chrisholt360 3 года назад
Yea it’s not too ideal
Далее
Получилось у Миланы?😂
00:13
Просмотров 867 тыс.
Stay on your way 🛤️✨
00:34
Просмотров 9 млн
Finger Heart - Fancy Refill (Inside Out Animation)
00:30
HOW TO GET 511HP FROM YOUR V6 CAMARO
16:12
Просмотров 86 тыс.
Toyota’s Announcement Shocks the Entire Car Industry
10:20
Buying The Cheapest Camaro SS In The USA... Sort Of
15:02
ФЭТБАЙК vs MTB Что лучше ? #shorts
0:21
РЕЗКА РЕЗИНЫ ДЛЯ ШИН
0:40
Просмотров 7 млн