Тёмный

How to Install the LATEST VLAND 86/BRZ Headlights! 

iilumo
Подписаться 1,4 тыс.
Просмотров 15 тыс.
50% 1

Utilising the latest in Bi-LED technology, enjoy a super bright, sharp and wide beam pattern to pierce through the darkness.
Featuring a start-up animation, sequential indicators, and Bi-LED projectors, we promise that this headlight performs as good as it looks!
Let us know in the comments below on what you think of this design!
Get yours here 👉🏻 bit.ly/45VIVNz
- Chapters -
00:00 - Introduction
00:51 - Remove Front Bumper Top Bracket
01:15 - Remove Side Markers
01:42 - Remove Clip behind Side Marker
01:55 - Remove Headlight Washer Caps
02:19 - Unplug Fog Light Wiring
02:37 - Remove Inner Liner Clips
02:54 - Remove Front Bumper
03:18 - Unplug Bumper Sensors
03:35 - Remove Headlight Bracket
04:00 - Remove Front Headlight
04:30 - Unplug Headlight Harness
04:49 - Install New Headlight
05:06 - Plug New Headlight Into Harness
06:05 - Test New Headlights
06:14 - Reinstall Headlight Fixing
06:20 - Reinstall Headlight Bracket
06:33 - Reinstall Front Bumper
06:42 - Reinstall Front Bumper Top Bracket
06:50 - Reinstall Headlight Washer Cover
07:02 - Reinstall Inner Liner Clips
07:13 - Headlight Alignment
07:32 - Startup Animation & DRL
07:59 - How to Disable Sequential Indicators
08:05 - How to Disable DRL Startup Animation
💳 AfterPay & Zip Pay Available
🔧 Installation Available
🇦🇺 Australian Owned & Operated
🌐 www.iilumo.com
📞 1800 003 888
📍 22 Atlantic Drive, Keysborough, VIC 3173
Music from #InAudio: inaudio.org/

Авто/Мото

Опубликовано:

 

4 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 81   
@CAGunzinfo
@CAGunzinfo 10 месяцев назад
beautiful camera work man! the first few seconds of the videos, I thought this was shot from a game but then realized that it's your actual car.. insane!
@iilumo
@iilumo 10 месяцев назад
Haha thanks mate!
@TheFixer91
@TheFixer91 Месяц назад
Hello, are these working when the car's lights are in AUTO? I have the same set, but they are working only when I put the lights ON manually from the stick. I switched around a couple of plugs, and when I'm in AUTO, I now have the DRLs but when its dark, they are not switching automatically to the low beam, as the stock would normally do. I would very much appreciate your input, thanks!
@chaukemt
@chaukemt 8 месяцев назад
Good video. Where can I buy those headlights. They look amazing
@iilumo
@iilumo 2 месяца назад
www.iilumo.com/collections/toyota-86/products/sequential-led-headlights-2012-2021-toyota-86-zn6-subaru-brz-zc6
@QuackingThings
@QuackingThings 10 дней назад
Do these take bulbs? how to convert low beam with my d4s hids on brz?
@iilumo
@iilumo 9 дней назад
These are a fully sealed LED headlight so they don't take any bulbs.
@eryon8045
@eryon8045 6 месяцев назад
Great Video! are these ADR approved?. I just don't want to risk getting a defect notice.
@iilumo
@iilumo 5 месяцев назад
Unfortunately, no aftermarket headlights will be ADR Approved
@jonny25106257
@jonny25106257 6 месяцев назад
So these arent plug and play fir the gt86 then, you have to use that harness?
@iilumo
@iilumo 6 месяцев назад
You'll need to splice wires for the GT model as the indicators and daytime lights aren't part of the headlight from factory.
@Kaiju.FL5
@Kaiju.FL5 9 месяцев назад
Can you do an instructional video on installin the fog lights for BRZ 2023?
@iilumo
@iilumo 9 месяцев назад
We'll consider it
@Kaiju.FL5
@Kaiju.FL5 9 месяцев назад
@@iilumo yes pls. Been holding back ti buy a set from you guys coz of the install process.:(
@AllSparkPowered
@AllSparkPowered 6 месяцев назад
Need help. Installed this headlights on my 2013 FRS. Used the extra harness that came with it and I tapped the turn signal wires to the stock harness. Now, without turning on the headlight, everytime I brake the car, the low/high lamp turned on all of the sudden and turned off after complete stop. Any idea how to fix this?
@iilumo
@iilumo 5 месяцев назад
That sounds strange - please get in touch with our team. support@iilumo.com
@whit3tail534
@whit3tail534 4 месяца назад
my daytime lights turned out be my turn signals for some reasons and the blue animation light does not turn on. All i did was plug in the plugs. 2015 frs. any suggestions?
@whit3tail534
@whit3tail534 4 месяца назад
update: i played with the plugs that come in the headlight and switched them around, animation turns on but turn signal does not light up, will continue to play with the plugs.
@whit3tail534
@whit3tail534 4 месяца назад
@patrickquang6583 what year is yours?
@iilumo
@iilumo 2 месяца назад
Did you end up working this out? Sounds like a wiring needs to be fixed if you had to use the adapters
@soldat996
@soldat996 8 месяцев назад
Do you know if they are legal in germany? considering getting them
@iilumo
@iilumo 2 месяца назад
Sorry not sure on the laws in Germany :(
@Blu_rz
@Blu_rz 7 месяцев назад
Is there a way to make the day time lights stay blue instead of turning white?
@iilumo
@iilumo 6 месяцев назад
Unfortunately not
@joN-ytt
@joN-ytt 9 месяцев назад
Is there a video for the integra dc5?
@iilumo
@iilumo 9 месяцев назад
We don't have any vids for DC5's as of yet
@joN-ytt
@joN-ytt 9 месяцев назад
@@iilumo if you guys do one soon i might consider buying a package for mine :)
@jezza9268
@jezza9268 3 месяца назад
Hey mate, can you make a video which shows how to wire these headlights into a gt86 as i would like to buy them but am not too confident on how to wire them.
@iilumo
@iilumo 3 месяца назад
We can guide you - send us a message on our FB or Instagram, or email support@iilumo.com
@WOO11Y04
@WOO11Y04 День назад
Did you get help? Installing rn if you could lmk how to wire would be greya
@yodrum
@yodrum 5 месяцев назад
I noticed when I put the e-brake down, both my low and high beams are running and staying on. Is there a fix for this ?
@melapelas2768
@melapelas2768 5 месяцев назад
Did you fix this?
@iilumo
@iilumo 5 месяцев назад
That sounds strange. Please can get in touch with our team - support@iilumo.com
@fuglyxs3514
@fuglyxs3514 4 месяца назад
I have the same issue on a base FRS usdm. I have to drive with the low beams on because that’s the only mode that shuts off the high beams. It sucks.
@fuglyxs3514
@fuglyxs3514 4 месяца назад
I have the DRL going to the fuse box and grounded. Turn signals spliced to existing harness. I’ve tried unplugging the DRL resistor the US FRS has and all that did was changed it with the ebrake, but both high and low stay on.
@llausiv
@llausiv Месяц назад
Did you end up fixing it? I have the same problem
@Buck_mtz
@Buck_mtz Месяц назад
Been trying to contact support because my daytime running light dow stay on on my headlights and i havent receive an email back
@iilumo
@iilumo Месяц назад
Hey Buck! Do you mind sending the enquiry through to us again just incase it somehow didn't make it to our inbox? support@iilumo.com
@user-xt2jg7fm8q
@user-xt2jg7fm8q 2 месяца назад
someone please make a video of how to wire the vlands in.. i have a 2013 brz and i have vlands but cant figure out the harness and wiring.
@iilumo
@iilumo 2 месяца назад
We show you how to wire them in this tutorial.
@failcheervideos5056
@failcheervideos5056 18 дней назад
@user-xt2jg7fm8q I did mine on a 2013 brz. I would imagine yours is probably the same if you have the limited version. They were almost plug and play but one of the wires was in the wrong pin hole and i had to repin it. Basically there are 8 pins on both harnesses but only 7 pins have actual wires going to them. So there's an empty spot on the OEM harness and on the VLAND harness. My DRL wasn't working at all so i looked at both harnesses and noticed that the empty spots on both plugs weren't lining up when i plugged them in. Basically one of the spots on the VLAND harness that had a wire was going to the empty spot on the OEM harness when you plugged it in so that function no longer worked. Just have to move the pins around. Found an easy tutorial that someone else posted that shows you how to swap pins ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nN_Ww2KZi9s.htmlfeature=shared
@SlowRz13
@SlowRz13 2 месяца назад
MUST READ THIS FOR 2013 BRZ - The original plug harnest is missing the lil metal tip inside the plug. if u look close at both plugs theyre missing a pin u need to add a lil metal tip to both so that the day time running lights work I just figured this out today !
@nigelmorris7313
@nigelmorris7313 Месяц назад
Hi Do you have a photo of this please.
@failcheervideos5056
@failcheervideos5056 Месяц назад
After you add the pin is it everything else plug and play and work as it’s supposed to? I also have a 2013 brz and was wanting to get these but after reading other comments I’m worried about it not being plug and play like advertised and it’s sounding a little complicated to get everything work how it should.
@failcheervideos5056
@failcheervideos5056 Месяц назад
@itza13brz
@SlowRz13
@SlowRz13 Месяц назад
once u add the pin into each plug( the lil black thing that connects with the lil metal tips) it should work just fine thats what happend to mine
@SlowRz13
@SlowRz13 Месяц назад
i have them & honestly i think it makes the car look super aggressive 10 out of 10 times im choosing these lights
@Buck_mtz
@Buck_mtz 2 месяца назад
Are these plug and play for a 2014 brz then?
@iilumo
@iilumo 2 месяца назад
This video tutorial was installed on a BRZ
@failcheervideos5056
@failcheervideos5056 20 дней назад
I did mine on a 2013 brz. I would imagine yours is probably the same if you have the limited version. They were almost plug and play but one of the wires was in the wrong pin hole and i had to repin it. Basically there are 8 pins on both harnesses but only 7 pins have actual wires going to them. So there's an empty spot on the OEM harness and on the VLAND harness. My DRL wasn't working at all so i looked at both harnesses and noticed that the empty spots on both plugs weren't lining up when i plugged them in. Basically one of the spots on the VLAND harness that had a wire was going to the empty spot on the OEM harness when you plugged it in so that function no longer worked. Just have to move the pins around. Found an easy tutorial that someone else posted that shows you how to swap pins ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nN_Ww2KZi9s.htmlfeature=shared @buck_mtz
@Buck_mtz
@Buck_mtz 19 дней назад
@@failcheervideos5056 Man thank you so much for your help! I will try this for sure. I was already thinking of returning them. Thank you.
@failcheervideos5056
@failcheervideos5056 18 дней назад
@@Buck_mtz no worries, i was looking for these answers when i was going to install mine so i figured i'd help anyone out who had similar questions. Also the DRL doesn't just come on when my car comes on unfortunately. It only turns on when i turn on my parking lights from inside the car. Not the biggest hassle but i think the reason for that is my normal DRL that came stock with my car isn't actually in the headlight its a separate strip of lights below my fog light. I think if your normal DRL is in your actual headlight and comes on when you put your car in drive then they will work as planned and you won't have the same problem as me. There is a way to fix this though i just haven't done it yet cause it's another extra step and i'm fine with how they work for now
@AngelMaldonado-pw3ch
@AngelMaldonado-pw3ch 4 месяца назад
I can’t get my daytime running lights to stay on, I don’t know if I wired them wrong, how do you wire the three loose cables? It doesn’t show in the video.
@iilumo
@iilumo 3 месяца назад
Please get in touch with our team and they can assist - support@iilumo.com
@luvme7518
@luvme7518 2 месяца назад
Bro did you ever figure it out??
@AngelMaldonado-pw3ch
@AngelMaldonado-pw3ch 2 месяца назад
@@luvme7518 yeah, I just rewired them to the fog lights
@luvme7518
@luvme7518 2 месяца назад
@@AngelMaldonado-pw3ch bro what’s your ig, could you send a video on how they look like cause mines ain’t working
@AngelMaldonado-pw3ch
@AngelMaldonado-pw3ch 2 месяца назад
@@luvme7518 angel_maldonado007 I got chu just getting to work so I might take a a while to answer
@monimedina2123
@monimedina2123 3 месяца назад
my DRL lights don’t even turn on i have a 2016 brz please help.
@luvme7518
@luvme7518 2 месяца назад
Did you ever fix it???
@iilumo
@iilumo 2 месяца назад
There are 2 DRL plugs on the headlights, try switching the circuit around to see if that resolves your issue.
@failcheervideos5056
@failcheervideos5056 20 дней назад
@monimedina2123 and @luvme7518 i had the same issue. If you notice when plugging in the VLAND harness to the OEM harness there is an empty spot on each harness. So there are 8 pins but only 7 have wires going to them. Basically both empty spots on both harnesses should be matching up when you plug them in but mine didn't so one of the pins that actually had a wire in it was going to the empty spot on the OEM harness which is why the DRL wasn't working at all. You need to pull the pin out and put it in the other hole so it matches up with the oem harness. I found a very helpful video on youtube of how to switch the pins which was a life saver ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nN_Ww2KZi9s.htmlfeature=shared
@failcheervideos5056
@failcheervideos5056 20 дней назад
@@luvme7518 Not sure if you got my tag but i had the same issue and explained how to fix it above^
@failcheervideos5056
@failcheervideos5056 18 дней назад
@monimedina2123 Check out my comment above you may have the same issue as me.
@failcheervideos5056
@failcheervideos5056 18 дней назад
2013 Subaru BRZ TIPS AND OTHER QUESTIONS READ HERE Instead of replying to everyone's comments that are having similar questions and problems i ran into i figured i'd answer what questions i could here. 1. Is it plug and play for 2013 subaru brz limited? Almost but not exactly. At least for me it wasn't, however the problem was easily fixed. Basically if you look at the VLAND 8 pin harness and the OEM 8 pin harness there are only 7 out of 8 pins on each harness. When you go to plug them in, all 7 pins should match up with the corresponding pins on both harnesses. I noticed that one of the pins on the vland harness was going to the empty spot on the OEM harness. This pin happened to be the DRL(white wire on vland harness for me) and is why my DRL never turned on. In order to get the DRL to work i had to remove the pin from the spot it was in and move it over one spot so it would match up with my OEM harness. Found a nice tutorial here that explains how to do so. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nN_Ww2KZi9s.htmlfeature=shared 2. DRL Doesn't come on at all but everything else works? This is what happened to me and i explain how to fix this above^. 3. Do the Daytime running lights come on when the car's lights are in Auto? For me no. The only way my daytime running lights come on is if i manually turn them on from the stick inside the car. I think i know why this is though for at least my model which is the 2013 BRZ limited. My normal daytime running lights aren't in the actual headlight. My DRL's that came stock with my car is a little led strip that's in a separate housing above my fog lights. I think if your DRL's are normally in your stock headlights then these should work fine. There is a way to fix this which is kind of explained in this tutorial video (I know this video is for different VLAND headlights but the process would still be the same you'd just have to pull the DRL wire out of the VLAND harness and follow the rest of the steps in this video) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GLKcZbEnUNM.html Overall these headlights look amazing and i would highly recommend them. I've only had them a week so can't attest to how long they last yet but they look awesome! Hope this helps anyone who had the same questions or ran into the same problems as me.
@iilumo
@iilumo 12 дней назад
Thank you for that. It seems as though these 'problems' are for the USDM spec BRZ's . It all works fine without any modifications here in Australian spec BRZ's.
@SoCloseToToastGanio
@SoCloseToToastGanio 8 месяцев назад
I don’t even see those on the VLAND website
@owburke
@owburke 10 месяцев назад
How do so many people not know how to pronounce BRZ!?! It's Zed, not Zee 🤦‍♂🤦‍♂🤦‍♂ learn English people!
@joestuehmer7967
@joestuehmer7967 10 месяцев назад
Br zed doesnt even sound right just like the rest of the stuff u british ppl say
@owburke
@owburke 9 месяцев назад
@@joestuehmer7967 typical Redneck, couldn't even learn if wanted to.
@hyperbones7087
@hyperbones7087 7 месяцев назад
Your not America
@fatassmcnugget7711
@fatassmcnugget7711 3 месяца назад
do you need the 6/8 adapter for the brz? mines a 2013 and the boomerang drls don’t work at all, but my set didn’t come w the adapters and idk if i have to spend $100 on them or not
@iilumo
@iilumo 2 месяца назад
Do they come on with low beams? Or do they switch off with low beams? You may require a always on harness for the BRZ as they switch the DRL's (headlight/bumper) from factory and this mimics it.
@failcheervideos5056
@failcheervideos5056 18 дней назад
I answered this in a comment above. You probably had the same issue as me but it's an easy fix!
@fatassmcnugget7711
@fatassmcnugget7711 18 дней назад
@@failcheervideos5056 lol i never even realized they replied a month ago but i did indeed get it figured out 😅
Далее
OLM Sequential Style Headlights w/ HIDs
6:43
Просмотров 64 тыс.
VLAND Sequential HID Headlight Install - FRS BRZ 86
6:43
Наташа Кампуш. 3096 дней в плену.
00:58
8 Must Have Mods for the BRZ, FR-S, 86
12:07
Просмотров 295 тыс.
VLAND Headlight DRL Wiring and Review
6:31
Просмотров 27 тыс.
GT86 Taillight Tier List
7:04
Просмотров 25 тыс.
WHAT YOU SHOULD KNOW WHEN BUYING A BRZ, FRS OR 86
13:47
HONDA ACCORD 😵‍💫 ФИШКИ ГНИЛУШКИ!
0:56
Lavage de voiture 😂
0:21
Просмотров 3,1 млн