Тёмный
No video :(

How to Install The New Z1 Nissan Z Undershroud 

Z1Motorsports
Подписаться 42 тыс.
Просмотров 7 тыс.
50% 1

The Z1 Aluminum Undershroud for the 2023+ Nissan Z was developed to replace your stock plastic undershroud with a rigid aluminum panel, increasing front fascia rigidity, improving airflow, and making oil changes easier!
The stock undershroud on your new Z was designed primarily to protect sensitive underbody components from weather and small road media, unfortunately, these plastic panels are not very strong and are susceptible to damage. The Z1 aluminum undershroud provides far more protection than stock by providing more rigidity and durability than soft plastic undershrouds. This is even more important in the newest generation Z, where Nissan elected to use a plastic oil pan.
To accommodate the factory oil cooler, the center of the front panel has a large raised air duct. This also provides additional airflow to the engine, helping manage the heat produced by your Z's twin turbo's. To keep large media (leaves, trash, etc) out of the engine bay, a honeycomb grille is attached to the front of the duct.
Shop Now: www.z1motorspo...

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@videomaniac108
@videomaniac108 7 месяцев назад
I just ordered a black anodized undershroud for my 370z, along with all the bolts and pins plus a Greddy magnetic oil drain plug. I can't wait to install it.
@wrkls_
@wrkls_ 4 месяца назад
For everyone wondering it’s a 25/64” (10mm) Drill Bit
@TBR972
@TBR972 Год назад
Recently, I do the same for my 370Z it came so nice on it. But unfortunately the plastic have some damage it miss a few bolts🤷🏽‍♂️
@shyyyo
@shyyyo Год назад
Great video as always! Question: does Z1 do mod installs on customer vehicles?
@Z1Motorsports23
@Z1Motorsports23 Год назад
We certainly do! Contact our service dept!
@vincentbattle1040
@vincentbattle1040 Год назад
Just picked one up
@rolosnismoz34
@rolosnismoz34 11 месяцев назад
What size is the drill bit to drill the holes?
@wrkls_
@wrkls_ 4 месяца назад
25/64” (10mm) Drill Bit
@wrkls_
@wrkls_ 4 месяца назад
Why’s that one have a vent at the front and the others don’t?
@Dabussy88
@Dabussy88 6 месяцев назад
I’m lowered about 2 inches so I’m a little worried about the clearance issue. I constantly scrape the plastic oem skid plate.
@pikapika1449
@pikapika1449 Год назад
Is this car on v1 nismo bumper?
@jamesmendez5644
@jamesmendez5644 5 месяцев назад
What bit did you use
@wrkls_
@wrkls_ 4 месяца назад
25/64” (10mm) Drill Bit
Далее
Why you may need a Thermostatic Oil Cooler
19:23
Просмотров 4,1 тыс.
How To: 370Z Undershroud Install
11:21
Просмотров 2 тыс.
PEDRO PEDRO INSIDEOUT
00:10
Просмотров 2,9 млн
Attempting the NISMO INTAKE Install | 2023 NISSAN Z
24:10
How To Change The Oil On The New Nissan Z
10:08
Просмотров 3,1 тыс.
Z1 Motorsports Undershroud install!!
11:52
Просмотров 7 тыс.
Z1 motorsports Ecutek Tune install pt 1
21:53
How To Install NOS
17:20
Просмотров 4,4 млн
How to Install Invidia Test Pipes 09-19 Nissan 370Z
41:07
My Top 10 Nissan 370Z Mods in 2024!
21:33
Просмотров 12 тыс.
Installing Long Tube Headers On My 370Z
27:13
Просмотров 144 тыс.
PEDRO PEDRO INSIDEOUT
00:10
Просмотров 2,9 млн