Beautiful Shop!! Love your LED setup. I changed over from fluorescent lighting to LED strips and have never looked back. The amount of light that is now present in my work area is amazing. Now I can’t blame any mistakes on lighting it’s all me... Great build.
Pro tip- adjust the clutch on the drill motor so it slips instead if breaking your arm or striking you in any way. It allows you to run higher RPM with a slower more controllable feed rate. Works great with 6" hole saws and thick material. Nice shop!
Great to see you back at it working on the new workshop once done im looking forward to seeing what you did with the upstairs home part of these job's!!!
Thank you Chris. Nice lighting solution. The shop is really looking good. With that shop under your home upstairs are you sure you want to start building a house. Everything looks pretty comfy to me. Take care, stay well and start enjoying that shop.
Very good information, I am going to upgrade my shop lighting using this product. Project is coming along and looks great. Looking forward to more videos.
Nicely done. Nailed the light spacing for the flush mount LEDs. Something the average person won't notice but if they are off any sticks out like a sore thumb. Once again nicely done my friend! The baker style scaffolding is a great tool. I made an extra shelf and had a large roll-away tool storage area. Eventually it got packed up for later use...
Great looking shop. One suggestion. I’m a electrician and I’ve ran into trouble with plastic anchors supporting boxes/lighting fixtures in ceilings. I would recommend to buy some toggle bolts and replace the plastic anchors if they fail to support them in the future. No need to go back and redo it right now just replace one at a time. That truly is a dream shop.
I spotted the plastic anchors right away also. Always included in the box and I always throw them in the garbage. years back one of my electricians used them in a plaster ceiling to hang track lights. Two weeks later the tracks fell!
Really nice to run through your videos of the barn workshop and living space. You obviously know what you are doing and your woodworking skills with hand tools are at a very high level. Best of luck with your new shop and upcoming projects.
Looking real good. Very nice video keep up the great craftsmanship and hard work my friend. Can't wait to see ur next videos. Love this shop build videos.Keep Making. God Bless.
Great information Chris! Really like your lighting setup and the tongue and grove ceiling you put in with the round lights! Beautiful shop, can't wait to see more of it. Thanks for posting.
A note on the lighting. While yes it's true that you want the whiter task lighting for your work areas because they are always used for the same purpose, your house is totally different. At home you want your light to mimic what the sun does (changes color temperature throughout the day). Sometimes you want rooms to light up like your landing an airplane, but sometimes you want it to feel cozy. Most lighting designers haven't been taught this yet. But dynamic color temperature has been proven to provide multiple health (benefits believe it or not). Just something to think about when you're planning for your house next. * What I'm referring to is called "warm dim". When the lights can "dim" from a higher noon day sun color temperature down to the candle light.
I found that out when installing LED lighting in my kitchen and had to get lighting with the different selectors to finally figure out what type of lighting worked well for indoor kitchen use. Now I know!
Looking great, Chris! I know you liked those wago connectors for wiring! As a former electrician, that saved me so much time, too. Looking forward to those project videos!
Sometime ago, I came across RU-vidr with WAGO connectors. Looked them up, saw they are code accepted here, and never used a wire nut again. Easy to fit in boxes, simple to make secure, and so far not one fail.
I really appreciated the detailed walk through on your new shop lighting, I purchased some NICOR Vaportight lights for my shop as well. There is only one end with a knockout open. The other end appears to be an area for a knock out but is just a small embossed circle, It appears that it will require drilling out. Don't know if this has changed since you received your lights. Did you have to drill out the second knock out area?
The shop is coming along nicely! I stumbled upon your channel a while back and really enjoyed your content. Especially the wooden mallets, they looked amazing when you were done. Hope to see some crafty stuff soon!
Fantastic! I've been looking to replace the 8' fluorescent lights in my little blacksmith shop, but the plethora of options for LED lights has just about scrambled my brain. I can't have the shop too bright because that'll wash out the colors of the steel, but too dark makes it a pain to see when I'm working at the table or band saws. Never would have guessed there was an option for being able to dim the lights.
You can use the clutch on your drill as well, just set it high enough to run the hole-saw but low enough so that when it catches the clutch disengages. Your wrists will thank you.
Typically THHN primary wire is used in conduit. Why was NM wire used? The additional outer sheathing from NM wire coupled with an enclosed space (conduit) creates additional heat which reduces the capacity the wire can handle (called de-rating). While LED's don't draw high amperage, if you put enough of them on the same circuit, and approach the 80% threshold of the primary wires capacity, then your primary wire will create plenty of heat. Also, while wago style connectors are far easier to work with, the constant heating and cooling cycles of wire fatigue the spring contacts within the connector and cause them to become brittle. These same style spring friction connectors are used in plumbing sharkbite fittings, and they suffer from this same issue. Wire ties may not be convenient, but they produce a far better mechanical connection.
Great work & terrific lighting for the shop Chris! I was wondering what the monthly electrical cost will be running all of that lighting? Anyway, hope that you & your family are doing well & staying safe. Where's our friend UTZ? 😉😉👍👍
It’s hard to know the cost because I didn’t have a baseline compare too. Plus the upstairs apartment electricity use. I do know they are way more efficient non LED lights
Hey Chris! We're glad our lighting could be a part of your shop! Let us know how they're working out for you and if there are other ways we can help your future projects!
Great video. I used Menard's smart electrician, for about $25 each at 5,500 lumens. I love how the light covers just snap into place, for easy cleaning. Great video my friend!!
Ha, go to @11:00 for Chris' "I'm not having fun" face. ;) I agree about the hole saws, they can be a pain to use, but I think they're better than the alternative with the two blades. Making them dimmable was a great idea and I really love those "pot" lights. I've seen a few other people install them, they look awesome.
Great video! Looks like you are oh so close to completion. When do you think you'll jump onto some "project" videos. I really like the build videos, just wondering. I noticed a few times you were asked about Atz but no reply, I hope all is well. Also noticed a question about the boat, I'm sure that it was not completed before your move unless I missed something. Are you planning on getting back to it? Good luck with everything, stay safe out there.
Hi grampies, I’m hoping to start woodworking projects again in the next month or 2 and bring the boat back in to finish. Utz is great though it’s hard to get him in the shop because he likes to follow our 2 kids around so much looking for snacks haha. I’ll get him involved a lot more again soon
@@ThirdCoastCraftsman whew! Glad to hear UTZ is doing well; sorry, got to shake the Alaska - The Last Frontier out haha! Can't wait to see your coming projects AND to see the launch of your boat! Stay safe and take care.
@@ThirdCoastCraftsman awesome. I'd be interested in knowing if they do in future or if you notice it at all. If not I'd love to know what dimmer switch you paired with those lights. I've got to install new ones in my shop very soon.
Chris, excellent job on the lighting! Did you get vapor tight lights for a reason (I’m guessing safety with flammable finish vapors)? If so, did drilling those holes into the fixture for the wires compromise the seal? I can’t wait to see more build videos with the new set up!
I would probally have the row in the middle ofset (placed where there is a gap on the sides), would result in a more even lighting of the room. But with this type of lights its not a huge issue.
Me too! When I had to read all about them I realized they are a European design and immediately fell in love with them! I’ll never go back to wire nuts again!!
You forgot Utz... unforgivable.... Utz is your QA/QC... 😄 It looking amazing!!!!! Great Job! Please allow me to express my concerns, being an electrical guy,... the flush mounted lights have a small box with a Power Supply Unit,... those PSU release heat and your are hooking them in such a place that is not ventilated. Plus you have thermal insulation all over with paper and wood. Normally the insulation is fire proof but the wood is not and also the paper that comes with the insulation. Like this, the heat sink needs of the PSU have to be verified, notice also that the PSU are not very reliable, many times they fail... not knowing the type you are using I cannot say more... if it is just a transformer, upon a failure they have two options, just open and nothing happen or cook up and become a piece of charcoal, this can start a fire... if it is some kind of Switch Mode Power Supply, they can do the same,.... stop working and nothing happens or overheat (very common)... I believe you have the second type SMPS, once have a dimming feature. Your shop/house is all wood,... observe the NFPA regulations for your own protection and ensure that your setup is in compliance with regulation. For what I observe on this video... maybe you have non-compliance.... the way to go around the problem is to install all PSU at another location and drive wires to the spots... also consider to have a metallic shield above the spots to prevent direct contact with flammable materials... the spots don’t need to be heat sink but they do develop heat... by doing this you will extend the life time of the spots and PSU. LEDs don’t like heat. Final note... if you install all PSU at a central location, do not fix them to wood directly,.... use a metallic plate as a backplate and connect that plate to ground...! If you need help on this please say so and also contact your dealer with this concerns... I think you cannot afford a fire... I’m concerned for you. Request,... Utz is mandatory on all videos... after all he is the manager ... (after the wife,... that is administration, CEO🤣) Thank you for the update! Great work and video ! Be safe
@@ThirdCoastCraftsman, if you need some tips/help just say so... no problem helping! Although I’m in Europe I’m aware of some US regulation because I work in the Oil & Gas Industry.... but most is about “good practice” and preventing impact if/when a catastrophic failure happens. It is always a pleasure to help! Stay Safe Wishing the Best for you and yours!
5000K lamp color has lots of blue light output. Google search “blue light eye damage”. Since you are stuck with this color, always wear amber safety glasses. Used to be glasses called blue blockers.
Hello, carpenter,To be able to see about you installing the lights Video,It's a great honor,I found outYou are veryWant to help your customer enhance his store Illumination brightness,You helped him add a lot of lights.In his shop.I don't know if you can use a spectral test instrument.Can you find out?The lumens of the light,They will focus on Wait, about one meter around the main body.However, the shopkeeper's shelves And display table,No more light sources can be obtained.Welcome to contact me., we will provide a new lighting solution.Give you all of Customers of the store
You should look Otto someone doing your videos for you. If your not making money on them you will still be gaining followers doing more videos in the meantime . Just tell you get more time sometime to think about