Тёмный

How to Install Your 4 Piston Racing Ported K Series Oil Pump 

pFbSpecV
Подписаться 5 тыс.
Просмотров 3,6 тыс.
50% 1

This is the video installing the 4 Piston Racing Ported K Series Oil Pump!! Don't forget to not make the same mistake I did!! Also let me know what your think of my quick fix.... Enjoy the video here is the info right off their website and the link to there facebook page and product link!!
Also if you see the entire video you will see that Jeff Revline has given us a discount on his website. Watch the video for the code!
www.revlinekc.com
Link for this exact oil pump.
www.4pistonraci...
Link to there facebook page.
www.facebook.c...
Info from there website for this oil pump!!
The stock oil pump is a great piece for up to 8,000 rpm. Past that, there can be cavitation issues and oil pressure drops as temperatures rise. Our ported pump increases flow by 25% and will allow continuous use above 9,000 rpm. The pump has been tested well over 11,000 rpm with great success. We start with a brand new OEM oil pump from Honda, disassemble, port and smooth oil passages to increase flow, and modify the outside housing so that it can be used on all K24 and K20 engines (including the K20Z3). The pumps are then cleaned, oiled, reassembled and repackaged. This part is cheap insurance to protect your multi-thousand dollar investment.
This pump has some advantages over the S2K pumps that are commonly used. The pickup is further forward, and lower in the pan, and it frees up an additional 1-2hp. This is the chosen pump for all of our racing engines for many of these reasons.
Installation Kits are available in the Options Menu for K20Z3 and K24 applications. Installation instructions with photos are included with all pumps.
Acura Integra K24 with Built K24 Head
Mods:
K24a2
Built K24 head with Kelford 179-A cams
Kelford valves springs and retainers
CSF Ultimate K Swap Radiator V3
12 inch Spal Fan
Custom AC Lines
Rbc Intake Manifold
K Tune 50 Degree vtc
Hybrid Racing no cut shift box
PLM Long Tube Header
2.5 inch exhaust to resonator then 3 inch back to K tuned turndown muffler
intake
Hondata Ecu K pro V4
JIC Coilovers
Pfb grounding kit
Tuned by Tim at Xact Tuning
check out my newly added store!!
pfbproducts.big...
Ram Air Headlight Facebook page
/ ramairheadlights

Опубликовано:

 

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 6   
@turbokefhatch9144
@turbokefhatch9144 5 лет назад
You need to take it out bc u won’t have even 30 Psi of oil pressure
@pFbSpecV
@pFbSpecV 5 лет назад
I have recently started the car and test drove it and oil pressure has been great!! So far no issues just working on the speed sensor issue since I installed a awd transmission. subscribe for sure videos and updates man!
@Pwdr169
@Pwdr169 5 лет назад
Could you install the oil pump if motor is still in car?
@pFbSpecV
@pFbSpecV 5 лет назад
You can do it! Just be aware of the chain.
@freddygeez4646
@freddygeez4646 5 лет назад
I'm pretty sure some of those are threaded I wouldn't use silicone
@pFbSpecV
@pFbSpecV 5 лет назад
Well I couldnt remove it lol it was stuck and i couldnt drill into it with what i had... so it shouldnt back out now with that welded bolt and silicone.
Далее
K20A2 Oil Pump Upgrade installed on  a JDM K24A!
16:57
k24 4piston oil pump install
10:16
Просмотров 25 тыс.
Я ЖЕ БЕРЕМЕННА#cat
00:13
Просмотров 619 тыс.
Самое неинтересное видео
00:32
Просмотров 1,4 млн
K20 A2 oil pump porting job!!!
14:58
Просмотров 23 тыс.
250HP K24 On Pump Gas Makes Us Fight Every Inch For It
20:03
Building My 10,000RPM, High-Compression K20
16:13
Просмотров 499 тыс.
How to set your Timing on a K Series Motor (DIY)
23:59
Просмотров 2,2 тыс.
Honda K20a TypeR PRB head porting by SRDmotorsports
13:50
How to build a Budget 260hp K Series Engine!
33:42
Просмотров 293 тыс.