How to insulate a van! | Armaflex Insulation & Alubutyl | silvervanproject

Подписаться 2,3 тыс.

Просмотров 26 тыс.

50% 1

Hello :)
in this video we show you how we sound deadened and insulated our van. There are many different ways to insulate a van and a lot of people say Alubutyl is unnecessary if you use Armaflex... But we had such great results in our old van with this combination and that's why we go with this setup again 👌
Feel free to ask us any question in the comment section!!
Cheers
Sophie & Andes 😏
- - - - - - - -
We used Armaflex XG in 19mm, 9mm and Armaflex tape:
- Sure you can find it on Amazon, but we found it way cheaper at our local dealer in Hamburg (TDH Dämmstoffhandel in Billstraße 226, 20539 Hamburg*) #supportlocal
Alubutyl*:
www.amazon.de/Reckhorn-Alubut...
- - - - - - - -
Music:
Keep On Going by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
Free Download / Stream: bit.ly/_keep-on-going
Music promoted by Audio Library • Keep On Going - Joakim...
- - - - - - - -
Camera used:
Sony A6400*
*Please note that we are NOT sponsored by the shop or the company who offers this product. We only share the name of the product or shop links, where we bought our material because we liked it :)

Опубликовано:

5 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@kcarthsas6790 4 года назад

It,s very nice ! Good jobs Continue like this ! I want others videos 😍

@TheHumanSoundSystem 3 года назад

Today finally is Armaflex day with my Sprinter, so had a little recap of your experiences and tips :)

@aboutandes 3 года назад

Have fun!

@juanviamont2764 Год назад

Hi, thanks for the video! What did you do to cover all the sheet metal that's left seen after putting all the armaflex panels?

@Pansonario 4 года назад

hi! you guys did a super job on your van! I've a question regarding Armaflex.. it's smelling with warm / hot temperature? I'm thinking to use armaflex ACE for my vwt4.. but i'm not sure about the chemical smell.. thanks!!

@aboutandes 3 года назад

Sorry for the late response! We don't smell anything 😜

@SilentFlights 4 года назад

Hi guys, looks like a great job! But I noticed that you do the floor insulation a bit different than what I've seen in similar 'floor-insulation-instruction' video's. What I've seen a lot is that they glue a wooden frame to the metal bottom plate first and then but bands of armaflex in between the wood. When the floor goes on top of this frame, it does not compress armaflex and thus it keeps it full insulation value. Now, to be honest, I want to insulate my van like you guys did, WITHOUT the wooden frame, but I am a bit worried that this might result in a bottom plate that slightly moves each time I put weight on it, since it might compres the armaflex each time and when I remove the pressure it probably bounces back up a bit (slightly). Can you please let me know if this is the case? Thanks! ;)

@aboutandes 4 года назад

Hi Jürgen, that is absolutely true, in the first place we also didn't build a wooden Fram but after we put the baseplate back in the van it felt super strange to walk on the floor. So we took out the plate again and built a wooden frame. You can find more information on our IG account! Cheers andes

@BrokenElegance 4 года назад

Definitely build frame. Insulation properties greatly suffer, if stepped on.

@WorkshopLateral 4 года назад

hey how much armaflex did you have to buy to insulate the whole van?

@aboutandes 4 года назад

Hey, around 36m2 👌

@JimOnFoot 3 года назад

How did you attach the beams to the metal?

@aboutandes 3 года назад

Sikaflex 💪

@lukasnelhubel1143 4 года назад

Hi guys 🙂, where did you use the armaflex 9mm? And why not 19mm everywhere? 🙂

@aboutandes 4 года назад

Hi man, we used 19mm almost everywhere but in the back we used 9mm on some parts. Thus we have the maximum width of the van in the back as we sleep sideways. Check our bed build video maybe that helps to understand our decision 🤗🤙