How to find out the cdi yamaha mio, jupiter z, vega zr, r new is still alive or dead.
The first step we must know is the color of the cable and its function as follows:
1. the orange cable is the ignition current output from the cdi that goes to the coil and make sure there is a current. And if there is no fire then it can be ascertained that the cdi is dead.
2. The black cable is for the mass or ground path of the CDI and make sure it is attached to the body or motor frame.
3. The brown cable is the 12 volt battery current after the contact is on or the current from the red kiprok output.
4. the white wire, the red line and the white blue line, are the positive and negative lines for the pulser and make sure the current reaches the cdi socket pin.
Thank you very much to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful.
please #subscribe#
@SIDIK NURYADEN CHANNEL.
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
3 май 2021
