How to Light Up Your Drone | FlyTronix LED Kit Review 

Another example of why we like and respect you! I'm 62 years old and that says alot about you! Just ordered some. The power of RU-vid!

Me needs!

Any electrical component on a quad can be used as an LED. Once.

You mentioned that other LEDs need t be wired in series which isn’t entirely true. You can wire each board in series or parallel. If you wire in parallel then the lights are not all individually addressable. The lights in the same positions on each board will always be the same color. It looks like that is how this kit works. It is also not necessary to wire power in series. You can just attach the data line at the far end of each board to get all the lights to be addressable.

Definitely to be considered as the new standard. In my experience: it’s advisable to cover the arms with insulate tape before mounting the leds to prevent a short after a crash.

You plugged in on the bench with props on 😮

I would prefer the FC had led pads on each corner of the board - i saw one fc with this feature. 4 thick stack is way too tight. Might put those on top of the top plate with a tpu cover instead so i dont kill my vtx