Heads up on the blue table: it’s going to tug the bottom film roll tab that you just stuck to the top heat shoe. It can be a booger to set the table just right, so I’ll try to describe how it should sit. The table sits parallel to the floor, with the distal edge resting on top of the protruding catches on each side, level with the locking slots on the machine. The curved arm rests inside of the pinnacle and does not slot into anything. It should settle into place smoothly and without force. If it helps, take a picture before taking the table out so you can double check that you placed it back correctly. It should also be level with the gap between the heat shoes. Good luck laminating! 🎉
