Тёмный

How To Loosen Lug Nuts Without An Impact Gun 

Mechanic Secrets
Подписаться 10 тыс.
Просмотров 28 тыс.
50% 1

How To Loosen Frozen Lug Nuts With No Special Tools: This is the easy way to break any lug nut loose. Using the force of inertia from a spinning wheel, you can loosen lug nuts faster and with less effort than you may have realized. Not only is this easier than most lug nut loosening methods, but you can also remove even the most stubborn frozen lug nut with this method. And the best part is, there are no special tools required. All you need is a 1/2" drive breaker bar (mine is a 24” Matco) and an impact socket, properly sized for your lug nuts. I can’t stress enough to use a BREAKER BAR and not a ratchet and to use an IMPACT SOCKET and not a chrome socket. Although this method looks virtually effortless, there are incredible forces at work which will shatter a chrome socket and/or break a ratchet if you attempt this method with the wrong tools.
This is by far the easiest method to loosen a stuck lug nut. And, it's also the kindest method on your back. Once you master this technique, I promise you'll never bend over to loosen lug nuts again. What's not to like? It's easier on the body, faster and more effective than power tools, long pipes, etc.
This is a cool trick I learned from my first boss when I was 13 years old and have been using ever since. In my opinion, this trick should be taught to and practiced by all drivers before they need to change a tire. You can break free even the most stubborn lug nuts with the lug wrench and jack that come with your vehicle, if you know how to use them. But, how many of us have been stuck on the side of the road and unable to loosen an over-tightened lug nut? Who knew the solution was right there in our hands all along? Please share this video far and wide for the benefit of every driver.
This video was shot on a combination of the following cameras:
Blackmagic Pocket 4K: amzn.to/3qpsSpl
Sony ZV-1: amzn.to/3F3pKDB
GoPro Hero 8: amzn.to/3wznAIR
GoPro Hero 6: amzn.to/3Flo1tF
Thanks for watching! We hope you enjoy this video and will consider subscribing to help us continue bringing you more Mechanic Secrets. We have lots of new things planned for the coming year. We’re expanding our topics and experts to include videos about auto body work, car insurance, how to not get ripped off in car accident insurance claims, which cars are an investment and which are a liability, the future trends of the auto industry, life hacks for safer and easier work, health and fitness advice to protect your body while working and much, how to make more money in this rapidly changing industry and much more. If you have ideas or requests for subjects you’d like us to cover, please let us know in the comments. Thanks for your support!!!
You can also support our work with a Mechanic Secrets merchandise purchase:
www.redbubble.com/shop/ap/875...
You can find us online at the following places:
Twitter: / mechanicsecrets
Instagram: / mechanicsecrets
TikTok: / mechanicsecrets
Website: www.mechanicsecrets.com
#MechanicSecrets #Automotive #Auto #Car #Garage #CarRepair #AutomotiveRepair #Truck #OffRoad #4x4 #MechanicLife #CarDIY #DIY
Mechanic Secrets and the Mechanic Secrets Logo are trademarks of Mechanic Secrets, PA.
©2022 Mechanic Secrets - ALL RIGHTS RESERVED

Авто/Мото

Опубликовано:

 

19 янв 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 43   
@paulspeedbowl4522
@paulspeedbowl4522 Год назад
A massive thank you from Australia, for about 3 months I've been trying to get the lug nuts undone on my Vy Holden Station wagon, a common problem on these with aluminium wheels , I tried a cordless impact gun, air impact gun and standing on a breaker bar to the point where it was going to break, so I gave up, after watching your video using the same breaker bar all came undone without fail, I was working from the ground without a hoist , that is the most impressive thing I've learned in a long time, thank you very much, I'll get a good night's sleep not worrying about getting stuck by the road with a puncture and not being able to change the wheel , as a side note my Dad could undo a drill chuck without a chuck key using a similar method but it never occurred to me this would work for lug nuts.
@MechanicSecrets
@MechanicSecrets Год назад
Wow, this is great to hear! So glad this tip helped you. For some reason, people don’t want to believe it actually works. Too easy I guess. Thanks for making my day with your success story!!!
@paulspeedbowl4522
@paulspeedbowl4522 Год назад
Thanks again, I still can't believe they're undone and with no damage, I was nearly going to buy a torque multiplier but couldn't really afford it , but your tip was better anyway, thanks again for sharing one of the best tips I've ever learned.@@MechanicSecrets
@billygraves7633
@billygraves7633 Год назад
My lug nuts are stuck an I was thinking to goto a shop n have them help me take the lugs off lol. I'll hand tighten them myself with a tire iron an drive home. 😂😂
@tjrick7745
@tjrick7745 2 года назад
Anyone that has skinned a few knuckles working a car should already know this trick., but seeing what a lot of newbie people post on YT and FB, these real world cheats are not known,. Good job teaching the skill and great demonstration. You are so right about knees and lower back. If only I had a lift.
@phillydurangosrt3725
@phillydurangosrt3725 2 года назад
That phototshop work frame by frame must've taken some serious time. 🤣
@recycleman2900
@recycleman2900 2 года назад
Great job Batman. I noticed you took good care not to scratch your nuts and didn't have to pull them too hard to arrive at your conclusion.lol
@MechanicSecrets
@MechanicSecrets 2 года назад
Ha ha! No nuts were harmed during the filming of this video. Wish I could say the same for the rest of the day.
@DeFinisLand
@DeFinisLand 2 года назад
Yo!
@phillydurangosrt3725
@phillydurangosrt3725 2 года назад
Great job on the new intro looks amazing!
@MechanicSecrets
@MechanicSecrets 2 года назад
Thanks!!!
@ImSrry4BeingWhite
@ImSrry4BeingWhite Год назад
But how can the wheel spi freely if its fwd? Woulsnt the axle slow down rhe wheel
@777Aron
@777Aron 8 месяцев назад
I notice that when you are spinning that wheel with the breaker bar, the wheel on the other side of the axle spin in the opposite direction. Do we really need to clear both wheel from the ground or the other wheel can remain resting on the ground, while we lift only the wheel we are working on? Haven't tried yet.
@joeldoxtator9804
@joeldoxtator9804 8 месяцев назад
You can also reverse the shock and use a rubber mallet on the end of the breaker bar. I have been doing this in place of a proper impact because I am cheap.
@Koldatt
@Koldatt Год назад
This is a good one, hope i dont have to use it outside of a shop
@DeFinisLand
@DeFinisLand 2 года назад
Great video
@MechanicSecrets
@MechanicSecrets 2 года назад
Thanks!
@vincecaporale3544
@vincecaporale3544 Год назад
Awesome! Who knew?
@skiparkcityut
@skiparkcityut Год назад
Solid
@makeintoschu
@makeintoschu Год назад
Do you think that this technique could be effective for removing the front axle nut?
@zaviermayo272
@zaviermayo272 6 месяцев назад
was wondering the same
@stevelebaron8600
@stevelebaron8600 Год назад
Using your method with long handle breaker bar....do you brake off any lug nut studs?
@MechanicSecrets
@MechanicSecrets Год назад
In my experience, there are certain frozen lug nuts where you are going to break a stud regardless of the removal method. But statistically, this method actually breaks LESS studs than impact wrenches, etc. People expect the opposite but if you are careful with your form, this method really can break free some tough nuts.
@andy_182
@andy_182 Год назад
thats fucking ingenious
@KingCease
@KingCease 6 месяцев назад
Wow!
@gfy69
@gfy69 6 месяцев назад
subbed and thankyou
@MechanicSecrets
@MechanicSecrets 6 месяцев назад
Thanks for your support!
@BaeLasso
@BaeLasso Год назад
Now my mind knows how to do it, hopefully my hands would too! 😅😅😅😅
@XiueXelu
@XiueXelu Год назад
But... Can I use this method to put the lug nuts back on?
@MechanicSecrets
@MechanicSecrets Год назад
Yes. But be careful you don't over tighten. Or snap a stud.
@dizzywehby3442
@dizzywehby3442 Год назад
This is awesome but I don’t have a lift
@MechanicSecrets
@MechanicSecrets Год назад
Almost everybody has a jack. Same concept, just a little less comfortable cause you’ll have to bend down a bit.
@tdb0ne1
@tdb0ne1 Год назад
Don't this method break more studs then an impact gun?
@MechanicSecrets
@MechanicSecrets Год назад
No, not more than impact gun. But, it can easily break a stud if the nut is frozen to the stud. But if the lug nut is just over tightened or frozen to the rim it will break it free with out breaking the stud. If the threads are where it's frozen the stud will fail do to how much more energy is applied than an impact gun air or electric.
@Theundisputedtruth
@Theundisputedtruth Год назад
I have a over tightened lug nuts on a hub what can I do ?
@danilooliveira4435
@danilooliveira4435 2 года назад
🤯
@DeFinisLand
@DeFinisLand 2 года назад
Yo!
@mikemallory6529
@mikemallory6529 Год назад
guess I gotta get a lift
@MechanicSecrets
@MechanicSecrets Год назад
Yes, I highly recommend the lift for servicing cars, but this technique can be performed with a jack. Just watch your knuckles on the concrete/asphalt/etc.
@haroldnorthern1230
@haroldnorthern1230 10 месяцев назад
If a impact gun put it on this can possibly Not Work no way
@dangerboy1111
@dangerboy1111 Год назад
bro are u from city and suburb name
Далее
DIY: How To Remove Frozen Lug Nuts - Best Methods!
13:52
Кто понял тот понял
00:24
Просмотров 462 тыс.
WE COOKED A SHRIMP KEBAB  #recipe #barbecue #food
00:21
Просмотров 288 тыс.
Еду за гитарой…
01:00
Просмотров 177 тыс.
⚡️Uylanishim kerak, sovchilikka borasizmi?...😅
00:50
How to use a Torque Wrench PROPERLY
8:13
Просмотров 4,7 млн
How to Remove a Stripped Off Lug Nut
4:49
Просмотров 314 тыс.
Overtightened lug nuts
12:30
Просмотров 64 тыс.
МОТ до 100 000₽ 😈
0:19
Просмотров 712 тыс.
😱 Велосипед-лимузин?!
0:20
Просмотров 814 тыс.