How to Make a Bell Siphon & How Bell Siphons Work

Подписаться 393 тыс.

Просмотров 761 тыс.

50% 1

Hi folks. Have been asked a few times now how I make up bell siphons & also how they work.
They are fairly basic bits of gear & are VERY easy to make up yourself with a few basic tools.
This design is based on Affnan's bell siphon improvements. Below is a link to Affnan's Aquaponics webpage with detailed explanations on how his siphon improvements work as well as information on Bernoulli's Principle,
www.affnanaquap...
Quick Links....
1:45 Bell Siphon explained
2:41 Working out standpipe length
3:29 Making the shroud
6:06 Making the standpipe & alternate options
11.01 Making the bell
12:48 Installing the bell siphon
16:44 Tips on fine tuning the bell
17:30 A look at a set up grow bed & flow rates
Bulkheads on Amazon** for folks in the States,
1" amzn.to/2qFCpap
¾" amzn.to/2pM0Gf7
Want to learn more about Aquaponics? 🐟 🍓🥬🍅
Now you can with Rob's "Backyard Aquaponics for Beginners" Guide for only $9.95.
You can see the guide in action on my website,
► www.bitsoutthe...
Or, buy directly here,
► robbobaquaponi...
Have a great one everyone.
Rob. 😊
Subscribe Here► goo.gl/vCXkP5
Would be great to see you come along & say "G'Day" when we post a clip.
Our Bits Out the Back Aquaponic & Garden store & affiliate link page
► bitsouttheback...
My Amazon Influencer page where you'll find gear I use around the patch & Aquaponics listed
► www.amazon.com...
You can help support our channel through
FARM YOUR OWN YARD Supporters site,
► farmyourownyar...
"Farm You Own Yard" is a dedicated Supporters/Members site where I host my exclusive, supporters only content for folks that would like to support the channel.
One-off contributions can be made to PayPal
► www.paypal.me/...
Thanks to all our Patreon Patrons for your ongoing support & friendship.
A HUGE THANKS needs to go out tho these Super patrons for supporting our channel
Rick Campbell from PineSeed Computer Repair - Data Recovery
pineseed.com.au - Computer Repair and Data Recovery
Servicing the Toowoomba Area (Queensland Australia)
Ben from Ben's Chicken Stampede at Winton (Queensland Australia)
Ben runs Chicken Races raising money for charity, and has an aquaponics farm too!
You can check out Ben's Facebook page here
goo.gl/v4myAA
Tina from BS Ranch
goo.gl/x0O4SZ
A homestead raising, ducks, chickens, goats + more in Oak Harbor, Washington while working on Masters of Plant Health Management with Ohio State University Grad School.
Steve McAlister
Not Bar Farm, LLC from Northeast Georgia USA
goo.gl/S7X4ww
Low input, small scale, local farming
MRWS Instruments - Cigar Box Guitar Emporium
Specialising in parts and accessories for handmade instruments.
CBG • BASS • GUITAR
www.mrwsinstrum...
Sillybugger
Aqua Gardening Brisbane Australia.
Shop Online or Learn about Hydroponics and Aquaponics. Worldwide Shipping!
bit.ly/AquaGar...
(Affiliate Link)
Bluestone Aquaponics
"Bluestone Aquaponics The foundation of today's food".
/ bluestoneaquaponics
Root & Ramble Tee Shirts I wear in many clips are available here ► rootnramble.com/
I don't get anything for this, just like the shirts 😉 🙂
Follow us on
Facebook ► / bitsouttheback
Instagram ► bits_out_the_back
Tumblr ► / bitsouttheback
Twitter ► @RobsUrbanFarm
Pintrest ► / bitsouttheback
Rob (That’s me 😉) is a participant in the Amazon Services LLC Influencer/Associates Program, an influencer/affiliate advertising program designed to provide means for sites to earn advertising fees by advertising and linking to www.amazon.com...
#Aquaponics #AquaponicSystem #AquaponicGrowing

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 751

@RobsAquaponics 3 года назад

Want to learn more about Aquaponics? 🐟 🍓🥬🍅 Now you can with Rob's "Backyard Aquaponics for Beginners" Guide for only $9.95. You can see the guide in action on my website, ► www.bitsouttheback.com/aquaponics-guide Or, buy directly here, ► robbobaquaponics.retrieve.com/g/XL0J6T2P#/content/90525

@TimothyDeSomerville 6 месяцев назад

Great explanation of how the Bell siphon works. I finally understand the process now! Thank you

@qaz9258 7 лет назад

Your ability to explain in simplistic detail is fantastic

@RobsAquaponics 7 лет назад

Thanks Q Az. Hope it helps you out in any projects you have a crack at. Cheers.

@tracytesson7171 3 года назад

Rob! I know you posted this video about 5 years ago! With what you posted I did exactly and my bell siphon worked perfect the VERY FIRST TIME! I’m on my way now brother! Thank you Thank YOU!!! THANK YOU MATE!!

@RobsAquaponics 3 года назад

That's great to read Tracy. 👍 I finally got around to make a trouble shooting video for the bell siphons as well but am glad you don't need to watch it. 😉 Cheers & happy growing mate 🐟🐟🌱🥦

@apgamer4053 7 лет назад

you sir are a master at explaining tried many other videos could not understand a thing

@marcusthompson854 4 года назад

I've been watching bell siphon videos for a while now and not understanding HOW it works...I could've just come here off the bat. Thanks.

@RobsAquaponics 4 года назад

Glad it was helpful Marcus. Cheers mate & have a top one.

@beerandprawns 3 года назад

Thank you for clarifying how a bell syphon works.👍👍👍

@RobsAquaponics 3 года назад

No Problem. I have a recent troubleshooting one that might help you out if you have issues. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rKEeXNwSxWU.html Cheers.

@jobamiolemen1977 4 года назад

Thanks, Rob Bob, you are a great engineer and teacher. You are impacting life positively.Kudos!

@RobsAquaponics 4 года назад

Am glad the clips have helped you some mate. Hope your build goes smoothly for you. 👍👍

@alvintan6123 4 года назад

Hello have a blessed day folks. i learned a lot from your video now i can correct and fullfill my aquaponic. thanks alot folks.

@RobsAquaponics 4 года назад

Am glad it's helped some Alvin. 👍👍 Cheers & all the best.

@evvie01 4 года назад

This is the first video that has made me understand their function. I've seen how to build many of them but your explanation was the best over all.

@RobsAquaponics 4 года назад

Thanks Evelyn. Hope to start filming a complete 3 bed system build in a few weeks time. Cheers & Have a top one

@evvie01 4 года назад

@@RobsAquaponics That will be interesting to see thank you for letting me know.

@gunterbraunkinder4876 2 года назад

VERY comprehensive. Professionally delivered Information.

@RobsAquaponics 2 года назад

I just released an updated version that contains troubleshooting info, if that helps any. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hpVzsM_7uZo.html Cheers.

@badmy004 4 года назад

".. and you're laughing". I just love Australia!!

@RobsAquaponics 4 года назад

😀😜 Cheers Mohammed & have a top one mate. 👍

@akshaybankar1880 3 года назад

Me too

@gillautengco9602 3 года назад

@1chking 8 лет назад

Your usual excellent job. I have taken to watching one or two of your videos at coffee break this week as the internet is working better than it has in the past four months. Again thanks.

@RobsAquaponics 8 лет назад

Thanks Calvin & I'm glad you'r getting something from the clips mate. 👍😊 Cheers & all the best.

@denbryanjavelona6322 2 года назад

now i fully understand the bell siphon cycle.much thanks for the video it helps a lot.keep it up

@RobsAquaponics 2 года назад

I'm glad it helped some mate. I have more information on the siphons on our Guide, www.bitsouttheback.com/aquaponics-guide & also in this RU-vid video if it helps, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rKEeXNwSxWU.html Cheers & happy growing.

@NoodlesR6 5 лет назад

Thank you for speaking in imperial and metric measurements. It helps us guys on other parts of the planet :-)

@RobsAquaponics 5 лет назад

Is no problem at all Adrian. 👍 Hope the build goes well for you. Cheers.

@theeconomicrevolutionist 3 года назад

This explanation is excellent especially with the graphic. well done sir.

@ryanstafford9717 5 лет назад

I only made it as far as that great animation. Absolutely perfect explanation - everything I needed to build my own. Super fast. Love your videos, from Oregon, USA.

@RobsAquaponics 5 лет назад

Hope the build goes well for you Ryan. Cheers mate.

@pby1000 4 года назад

Ryan Stafford Videos like this are great. Right to the point.

@babygorilla4233 3 года назад

Thanks for the great explanations im making a tiny indoor aquaponics system

@RobsAquaponics 2 года назад

Have fun with the build Nate. 👍

@ERone43 3 года назад

Only an Aussie would not only know, but use in conversation- the word “swarf” Good on you mate! Made my day

@RobsAquaponics 3 года назад

😀 No problem Eric. Cheers mate & have a top one.

@kevingath9801 3 года назад

Great video, thank you! I'll be using you DIY depth gauge and the tape & screw fittings forevermore.

@RobsAquaponics 3 года назад

Cheers Kevin. 👍

@lakario 3 года назад

Great video! Thanks for making the bell siphon so clear with the animation. The build guide is super helpful, too.

@RobsAquaponics 3 года назад

Glad it helped Nathan. Cheers mate & have a top one.

@billbucktube 4 года назад

I've made several bell siphons, good info on widening the top edge of the downpipe! Thanks

@RobsAquaponics 4 года назад

Cheers BillBuck. 👍

@j.bishop7888 3 года назад

Yippee! Thanks for excellent info! Today I completed my first chop and flip with bell syphon and it worked perfectly first time. I need to add more media, I’m 470km from nearest shop but have 140kg of lava rock in so far. That’s given me 10cm ish to get the bacteria started! Baby Barra in aquarium in my lounge room ready to go in once it’s ready!! Thanks so much for a great, informative channel… I’m in the red centre of oz!

@RobsAquaponics 3 года назад

Nice work JB. I take it the barra will love your summer temps out there. 👍 Cheers mate & happy growing.

@thasandman1122 4 года назад

Thanks for taking the effort of making the animation - now I get it!

@RobsAquaponics 4 года назад

Glad I could help some Sandy. 👍 Cheers.

@creative1768 4 года назад

Thanks for your videos, i am learning a lot from it, for now just trying to learn about every little things about different kinds aquaponics system, i will be building my very first aquaponics system hopefully this coming summer, once again thank you.

@RobsAquaponics 4 года назад

Hope the build goes smoothly for you L Y. 👍 Cheers & happy growing .🌱🐟

@thalfis 7 лет назад

I really appreciate your laid-back demeanor, thank you for sharing your knowledge and experiences with all of us :)

@RobsAquaponics 7 лет назад

No problem at all Keinan & hope the clips have helped you out mate. Cheers & have a top one.

@SuperDaveno 4 года назад

youtube put this video in my way a few days ago, now i have an aquaponic rig at home...i am a slave of the algorithm.

@RobsAquaponics 4 года назад

😄 Have heard a similar tale from other folks Dave. Cheers mate & happy growing. 🐟👍

@martinc9867 4 года назад

Thank you very much,I go with the motto,when I cannot put it together in my mind its too complicate,so another solution is needed or some knowledge !!!I was not able to figure out how these two pipes put together make the water drain without any pump needed and changing levels from almost full to almost zero alternating.I goolged and your video come up again,a confirmation that I need to subscribe : ) Got the point now !!!Thanks and GOD bless you and your family,and your garden also of course !

@RobsAquaponics 4 года назад

Glad it helped you out Martin. Hope the build goes smoothly for you. Cheers.

@martinc9867 4 года назад

@@RobsAquaponics All good so far,waiting for the clay pepples to arrive.I already had a hole of a few centimeters in the top of the barrel,so I closed it with a conical cup and made a hole for a piece of flexible tube.The upper part is a coke bottle,stuck in the conical cup and holes at low level,works nicely.i struggle with leaking on the cover all around it,its a barrel with a coer of about 30cm.I put everything together with hot glue,I hope this is not a problem for the fish and plants.Parts,fishes and seeds are a little bit difficult to get here in Assam/NE India.Specially in the last couple of months.So I use what I have at home anyway which we would have to throw in the trash anyway.

@graemedicks3139 4 года назад

Simplist explaination is best - very helpful video !

@RobsAquaponics 4 года назад

Glad you enjoyed it Graeme. Cheers mate & have a top one.

@sherylnapier6020 8 лет назад

Thanks so much for converting the metric measurements. Very thoughtful

@RobsAquaponics 8 лет назад

No Problem Sheryl. Cheers.

@deakemarschall2992 8 лет назад

Superb video mate. Great details with no fluff. This video should be required viewing for every other YTer who thinks they can make a "how to" video. And I may never even set up a similar system but I really enjoyed watching. Cheers.

@RobsAquaponics 8 лет назад

Thanks DW. Have a great one mate.

@ofcv1238 Год назад

4:46 cutting PVC on table saw is guaranteed way to suck hand into blade vie jamb and power spin of PVC. Excellent advice on debris and eye protection.

@VahnWyrde 5 лет назад

it was... actually so easy. this is really great. Im pretty slow so this easy explanation already gave me an idea to make my own.

@mattsmith6885 5 лет назад

I really appreciate your videos, thank you for taking the time to educate. One trick that I've learned over the years when cutting PVC is that you can turn your saw blade around (reverse the teeth) and you will never fracture the PVC/plastic.

@RobsAquaponics 5 лет назад

Cheers for that mat. Will try that on the batch of bell siphons I'll be making soon. Cheers mate. 👍

@acuzamendoza 6 лет назад

The system siphon very good, and excellent video, well explained, this if it is a video does not matter the language in which the audio is recorded, the images speak for themselves, congratulations tocallo (not by the name, but by the beards) . A hug and thanks for giving for free. I do not speak Inglis, but your video teaches, trains, that treats the teaching - learning process, you are a good teacher. Thank you. Take care man, see you. I'll sign up and I'll give you a little finger up, bye.

@Rhyger 4 года назад

you my friend.. .genius... you are a teacher and master at this thank you

@RobsAquaponics 4 года назад

Glad I could help some Carel. 👍 Have fun with the build.

@barefootlivin 7 лет назад

Thanks for all the great videos. I am preparing to build a chop and flip IBC and i wouldn't have been able to get started without your uploads.

@RobsAquaponics 7 лет назад

Is all good mate 👍 How did the build go for you?

@barefootlivin 7 лет назад

Everything is complete and the water is cycling through the system well. I'm just waiting for the bacteria to get established to start converting the ammonia. Thanks again.

@RobsAquaponics 7 лет назад

Nice one Shayne & happy growing.👍

@rypes8089 5 лет назад

I love your channel! I have been watching for a while now 🙏 I've made 1 back in high school 2012 for my senior year project to graduate and i plan to do this again with this system setup. Thank you for the motivation brother and keep up the good work 🤙🏽

@RobsAquaponics 5 лет назад

That's great to hear Rypes 808 👍 Hope the build went well mate & happy growing. 🌱🌱

@robcruthis7539 4 года назад

Hello, Thank you for your time posting these tutorials. You mentioned that it takes 10 minutes to fill the grow bed and 3 minutes to drain it with the bell siphon. I calculated your pump at 158.5 gph is doing 2.66 gpm's. My first question is what is your cycle on/off rate so that you exchange the tank water once per hour? My tank is pretty close to the same size and I am still learning and I am having problems getting my flow right. My fish tank(no fish yet) is closer to 190 gallons. My grow bed is 45"x38"x12" . I measured 45"x38"x8" and calulated it will hold 60 gallons +/- of water, stopping at 4" from the top lip. 2 inches above this with river rock and a 2 inch lip above the river rock. I estimated my grow bed to hold 24 gallons of water after the 3/4" river rock owned 60% of the space. River rock 36 gallons, water 24gallons. So does my sump need to be at 24 gallon? I have read that it is a good ides to add 50% additional, making the proper sump tank 36 gallons. Sound right? I initially estimated mine to be 18 gallons and that is what I used and I am having a flow exchange issue. emptying the sump tank faster than the radial flow filter will replenish it. I made a video under my name showing what I have going on and asking for suggestions from someone that knows. But anyhow I think I will reduce the size of my bell sipon from 1 1/2 to 1 in like yours and incrase the size of my sump to 35 ish gallons. My sump now currently gravity fills from the radial filter and it is overflowing until the fish tank and radial filter level off and the radial filter bucket drains low enough to stop flowing into the sump tank. First attempt at this. Sorry to be long winded. Thank you again.

@RobsAquaponics 4 года назад

Hi Rob. The size of your sump needs to be at least as large as the grow bed so it can hold enough water to cover the pump as well as leave enough in there so you don't need to be constantly topping it up with fresh water all the time. You can use the 50% of bed volume once you start adding additional beds to the system is the rule I like to follow. I just had a gander at you system clip & think you need to increase the size of your sump to at least the total volume of your grow bed, if not larger for the reasons I stated above as well as to be able to hold the total volume of the grow bed in it. How do you have the stilling well on the radial flow filter connected? If it's airtight it may be initiating a siphon & draining faster than it would via gravity. Hope that helps some mate.

@TheWright52 2 года назад

Hi Bob, I love this video., thanks so much for sharing tutos like this. It enables anyone out here to setup his own system. thanks again.

@RobsAquaponics 2 года назад

Glad it was helpful!👍👍

@bigkhris Месяц назад

Thank you for all of your hard work and knowledge. You helped me so much.

@RobsAquaponics Месяц назад

Glad to help & hope your build goes smoothly.

@mentalvmaxrider 5 лет назад

Hi. Love your videos. Thank you for all of your help and insight. I am planning a system for the basement of my house and your vids are a great help.

@RobsAquaponics 5 лет назад

Is great to hear they've given you a few ideas. 👍 Hope the build goes well.

@McDowallManor 8 лет назад

Thanks - it's handy to have this so I can show others how to make them.

@RobsAquaponics 8 лет назад

Glad I can help Andy. Cheers mate. 👍

@danbirch8939 4 года назад

Excellent video! Especially thank you for translating both inches and metric! Please be super careful when cutting those notches into the shroud with the miter saw. I know a pro who lost his hand to a miter saw...good idea would be to start with a longer 4” pipe, cut your slots (keeping your hands away from blade), then trim to length after slots are done.....also, I too was having some problems with the siphon initiation. Another easy way to assure the initiation is to have the drain begin with a 90 degree angle, pipes 1st 1-2 ft stay horizontal, then down to storage. Again, awesome tape. Thanks!!!

@RobsAquaponics 4 года назад

Glad you enjoyed it Dan.👍 I grew up working in my father's engineering factory so have experience working with dangerous tools. But in saying that, you make a very good point about starting with a longer section & cutting it down once the slots are cut. 👍 Cheers mate & happy growing.

@markzarraonandia6975 7 лет назад

Used your ideas and methods to make a bell siphon. I've got a 1/2 - 55 Gallon barrel. Works like a charm. Thanks! This is a test grow bed. If everything works well I plan on going larger and use my 3000 pond and several grow beds. I've got Green Onions, Jalapeno Pepper, Patty Pan Squash, Lettuce, Cherry Tomato, Carrots and Radishes.

@joewamsley8004 4 года назад

Great video. Metric sounds so easy. The base plate is extremely valuable. I built my first versions without a baseplate and it was pretty painful if I moved the shroud at all. The stainless screws only work in air. I tried using something similar underground outside and the water leaked out because it couldn't air dry a seal around the screw. Thanks for the great explanation!

@RobsAquaponics 4 года назад

Thanks for that Joe. Have never tried to bury them but will keep it in mind. Cheers & have a top one.

@joewamsley8004 4 года назад

@@RobsAquaponics Ya, it surprised me too. I think when you do the screw method a little tiny bit of water leaks out and dries and seals. But if the pipes are in a place where it'll wick away the water never air seels. Pretty cool.

@lifeinthailand 8 лет назад

Very well explained, Affnan has been after me to get an aquaponices system started, I do like the new system he has with the rain gutters, Very simple and easy to build. Ginger is looking very good.

@RobsAquaponics 8 лет назад

They are a sweet system he's knocked up & it's the next logical step from the fish farm you've got on the go. That one barrel could run a fair number of beds too ;) Cheers mate.

@cardinia1 4 года назад

you single handed re peaked my interest in this subject due to the simple way you delivered it nice one falla keep it up- of course i subbed

@RobsAquaponics 4 года назад

Hope you're enjoying the rest of the aquaponics content mate. Cheers.

@m9gaming572 4 года назад

Your channel teached me a lot about aquaponics keep up with the good content

@RobsAquaponics 4 года назад

Glad I can help some M9G Have a top one.

@asifborouge 4 года назад

A great video to see (informative and explained in a practical way)........... thanks

@RobsAquaponics 4 года назад

Glad I could help Asif. 👍

@joe-n-texas8747 8 лет назад

I use this exact kind of bell, it has been foolproof for 3 yrs now. Your videos were paramount in my backyard success. Thanks Rob Bob

@RobsAquaponics 8 лет назад

Glad to hear they'e going well for you Joe & the clips migt of helped you out some. Cheers mate & all the best. Rob.

@melneeds6358 3 года назад

What a wonderfully, informative video. Thanks for sharing!

@RobsAquaponics 3 года назад

Glad you enjoyed it Mel. I just released a trouble shooting video on the bell siphons if it helps any, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rKEeXNwSxWU.html Cheers & have a top one.

@RobsAquaponics 7 лет назад

Thanks for watching folks & don't forget to click the subscribe button if you enjoyed the video. 🐟🐟 Share the clip around with family & friends if you think they'll enjoy it too. 👍 Cheers all & have a top one. 😊

@BetterDeadThanRed99 6 лет назад

The flow is restricted to 3/4 in? I have a 3/4 bulkhead fitting like that one... but the thread on the smaller end is meant to be adapted to a garden hose - or has the same kind of thread anyway. Will it matter?

@surendrans22 6 лет назад

Awesome

@RobsAquaponics 5 лет назад

I would try to make the drain under the bed ¾" with 1" being better to help with the water & air flow.

@BetterDeadThanRed99 5 лет назад

@@RobsAquaponics Awesome, thank you. I should upload a video when I'm finished setting up the system. So excited :) I found out the hose threaded adapter comes out of the bulkhead fitting and it's a standard female NPT thread, so no big deal. I just finished digging to set the IBC ~24" into the ground. That should keep things nice and cool - but I have to dress the tank with something before burying it. So much work!!!

@moekonyanemarumo3249 5 лет назад

Thank you Rob you are a life saver 👏

@EarthyLee 4 года назад

Thank you Mr Gandalf. I learnt a lot from you! You’re De Champ!

@RobsAquaponics 4 года назад

🤣 Glad it helped Some SD 👍

@oscar86456 6 лет назад

Thank you so much Rob Bob's! your video answers all my question about Bell Siphon.

@RobsAquaponics 6 лет назад

No problem Oscar. Cheers & have a top one.

@dionparnham3822 5 лет назад

Absolutely love your work mate! Thanks to your awesome videos I've been able to make my very first aquaponic fish tank to play around with to get started and learn more about aquaponics! Next project I will be attempting to make an IBC aquaponic tank.

@RobsAquaponics 5 лет назад

Nice one Dion. Hope it's growing well for you. 👍👍🌱

@andrewgraves4026 8 лет назад

Another great one, thanks! Even better and even clearer than the last time I watched you explain it, and I thought that one was good... Happy growing.

@RobsAquaponics 8 лет назад

Thanks for the feedback Andrew. Cheers mate & all the best.

@AGEnderRedCarpetHandPoured 7 лет назад

Thanks for that bit of walkthrough, I've been looking into setting up a small scale aquaponics setup, and like the bell siphon method best so far from what I have seen

@RobsAquaponics 7 лет назад

Glad I could help some. Have you started the build yet?

@AGEnderRedCarpetHandPoured 7 лет назад

Hi, thanks for the response. No, I have not started yet, it's been pretty wet here in California so far, so I have not been able to get anything started. I did draw out an idea of what I would like, (drafting classes 15-20 years ago come in handy sometimes) though it is probably bigger then I should go with no experience with any systems other then conventional, in the ground gardening, and limited funds (I like my plan drawing, and really think it could do wonders, 150gal tank and 88 ft² of beds, but would be more then I can spend most likely). Hopefully I can decide what size system I want to put in soon. I'm going to have at least one area 6 feet wide and 20 feet long, possibly 2, depending on how in depth I want to get. Typically we would have 2x-3x that space, but outside circumstances have cut that space down for this season. I have also thought that the chop and flip setup you have shown, especially with the 55gal drums, that could be a good way for me to start out and learn the ropes of aquaponics before going full size. I also would really like to use edible fish, which I will have to research some, and find the best fish for here, summer get to the low to high 90s ºF (mid 30's ºC). I do plan, once I start, to post videos about it on my channel, and show my progress.

@RobsAquaponics 7 лет назад

Is great to hear that you are putting a fair amount of thought into the system before lifting any tools. Planning could save you a lot of pain down the track. Cheers & have fun with the build.

@BeatAddict808 2 года назад

Yeeeeeah, Bob's your Uncle! Thank you Rob. Werd and Cheers.

@RobsAquaponics 2 года назад

Hope it helped some mate. 👍👍

@thomaswolf6507 3 года назад

A complete parts list for this build would be deeply appreciated!

@RobsAquaponics 3 года назад

Hey Thomas. You can find it here, www.bitsouttheback.com/chop-and-flip-aquaponic-system Cheers mate.

@thomaswolf6507 3 года назад

@@RobsAquaponics Thank you it has been extremely helpful! I also found your Amazon affiliate link which has pre-built bell siphons for sale at a reasonable price, I haven't made up my mind on which to purchase because local hardware stores are useless for a lot of these parts and if I combine all the unique parts online it's more expensive than the finished thing, so, I'll probably go with the prebuilt one at first, reluctantly. Doing a prawn (giant freshwater Malaysian) and tilapia (blue, pure species from Lakeway Tilapia) dual-run this winter and I am trying to maximize my energy usage. Any input on how to fit an IBC down basement stairs? Haha... Heating is the major one for energy use, followed by lighting. I appreciate the help!

@AnnCrumsMiniHomesteadNews 8 лет назад

We use a bell siphon and this just explains it so well! Sharing with a gardening facebook group I'm on!

@RobsAquaponics 8 лет назад

Glad it was helpful Ann. Have a great one.

@karelbaresh6727 5 лет назад

Wonderful presenter and a great Master. Thanks!!!

@RobsAquaponics 5 лет назад

I'm glad it helped you out some Karel. Happy growing.

@firasaldahir9624 2 года назад

It's very impressive that you have replied almost for every comment . Today I subscribed to your channel hopefully that you help me to create my own aquaponic system.🌺🌼🌹🏵️

@RobsAquaponics 2 года назад

I hope the build goes smoothly when the time comes Firas. 👍👍

@andrewkelly4100 7 лет назад

i am only just starting to research aquaponics and soon i hope to get started with my own..........i found a link to your videos through 'DIY Aquaponics' app on android. I have Subscribed because i love your videos and the app has a lot of good info for a beginner like me.......Thanks a Lot :)

@geoffgrigg 7 лет назад

You are so dedicated to sharing - thank you.

@RobsAquaponics 7 лет назад

Is all good mate 👍 Like to help fol;ks out where I can. Cheers & have a great one Geoffrey.

@j.c.2214 4 года назад

thanks for all the vids lots of info an very easy to follow have a blessed day Rob.

@RobsAquaponics 4 года назад

Cheers J. C. Have a top one. 👍

@jameslingenfelter5136 5 лет назад

You were my motivation to build a chop and flip aquaponics system I went out and got the IBC Tote got the cage cut but couldn't get all the screws out of the bottom frame cuz they were stripped I tried a few different techniques to get them out but I haven't had much luck yet once I get those out I'll be able to continue on with the project I'll be posting on my page if you'd like to check it out and maybe give me a few pointers

@jameslingenfelter5136 5 лет назад

I got my IBC Tote shop flip and painted about to start on the Bell siphon. Thanks Rob

@jeffmitts5363 8 лет назад

Good one Rob I built basically the same siphon (Yep Affnan as well... a sharp dude) and after initial tinkering with drain pipe extension / fittings, it works flawless. I had some 4" slotted ag pipe and seems to work good for a shroud. Thanks for more great info. The mega ginger looks awesome. hope all's well Jeff

@RobsAquaponics 8 лет назад

Hi Jeff. There's a reason the Affnana's siphon has become the standard 👍 Hope to be pulling the ginger out this weekend If I get the time. Cheers mate & hope seasons treating you well. 😊 Rob.

@xxblatxx 6 лет назад

ok your little diagram was awesome. i now know how it works. thank you so much

@RobsAquaponics 5 лет назад

Might be holding open days & workshops in the future so you may get a chance xxblatxx. Cheers.

@wazowski6709 2 года назад

Very timely that I stumbled on your video. I'm setting up some grow beds using IBCs & need to make some bell siphons. I've subscribed & looking forward to checking out your other videos. Greetings from Vic 😊👍

@RobsAquaponics 2 года назад

Hope the build goes smoothly Wazowski. 👍

@SpaKessemBamaga 8 лет назад

Well done rob, a very informative video, your doing an awesome donation the the public. About gardening and aquaponics.

@RobsAquaponics 8 лет назад

Hi & thanks. Hope it comes in handy for you. Cheers.

@robthomas6773 4 года назад

Well explained Bob

@RobsAquaponics 4 года назад

Cheers Rob. 👍

@homefarmideas 8 лет назад

Right on Rob:) Good stuff my friend! I know the editing is not easy so very good job with this video!

@RobsAquaponics 8 лет назад

Does take a while to sort it all out ;) Cheers mate.

@btgreenhouses6258 4 года назад

I love his quotes "And you are laughing" 😁

@RobsAquaponics 4 года назад

Cheers BT GH. 😄👍👍

@andrewkelly4100 7 лет назад

awesome video thanks.....it explains the bell siphon perfectly

@the_only_f 3 года назад

Beautiful explanation that helped

@RobsAquaponics 3 года назад

Glad to hear that it helped some.

@حيااللهالاحرار-ز2ز 8 лет назад

I am from algeria thank you for this infomrmatin wish you all the best

@RobsAquaponics 8 лет назад

Hi there & thanks. Hope it helps you out some. Rob.

@rajupv3947 7 лет назад

Thank you for such an informative video.Everything is clear.

@hedzzup420 4 года назад

I've just recently got into hydroponics and thought this would be an awesome stepping stone for my next experiment. I'm just wondering if a system like this would ever develop algae problems in the reservoir where the fish live? I've watched a few of your videos now and have learned a lot. keep up the good work!

@RobsAquaponics 4 года назад

You will get a small amount of bio slime & algae form. The bio slime is beneficial so I leave that be. Algae can be controlled by limiting the amount of sunlight that hist the wet surfaces. Hope that helps you out some Hans. 👍

@ofcv1238 Год назад

Bell siphons are amazing…just passive power exchange is fun to see in operation

@RafsKitchenGardenChannel 8 лет назад

Hi Rob, Great explanation I never got really how it works before.

@RobsAquaponics 8 лет назад

Hi Raf. Glad I could help some. Have a great one mate.

@paulruscoe5355 8 лет назад

Thanks for another great "how to" video! I'm gonna have my first crack at bell siphons this weekend.

@RobsAquaponics 8 лет назад

Hope it went well Paul. Cheers.

@paulruscoe5355 8 лет назад

+Rob Bob's Backyard Farming I managed to get all the bits but unfortunately ran out of time, hopefully next weekend. I'll let you know how it goes.

@RobsAquaponics 8 лет назад

The weekend flew by for me as well. Cheers mate.

@georgemercuri1586 7 лет назад

You have the best videos by far!

@RobsAquaponics 7 лет назад

Thanks George. Have a top one mate.

@arceeemil1305 4 года назад

...informative... thanks for naswering my questions about bell siphon... hope to build my set up... later

@RobsAquaponics 4 года назад

Hope the build goes well Arcee. 👍👍

@gigano6 6 лет назад

good day from Canada, love your videos my wife and i watch them a lot and have learned so much. thank you for taking the time to share! would you be able write a list of the parts for this siphon?

@RobsAquaponics 6 лет назад

Hi there. I will be adding a bell siphon page to the website that will have a parts list of sorts. The issue I've seen is that names of parts differ in different parts of the world so didn't include it here. The post on the page will include pictures which will help folks more I think. Just need to find the time to pop it up. Cheers.

@Can_non69 3 года назад

Appreciate your content. Could you do a video on fine tuning the bells

@RobsAquaponics 3 года назад

Hey David. Have been planning to do one for a while now but never get around to it. Will bump it up on the list of videos to to. Cheers mate.

@Can_non69 3 года назад

@@RobsAquaponics that would be great. You may recall a question I made previously about 2 of my beds producing differently. The bad bed has a slower cycle but I can't speed it up cuz then the bell fails to stop.

@brucedavis8736 6 лет назад

clear and to the point.Respect!

@zZzTytyzZz 6 лет назад

you deserve more views than that, respect sir!!!

@RobsAquaponics 6 лет назад

Thanks 🙂 Feel free to share the clips if you think they're helpful as that helps the channel as well. 👍 Cheers & happy growing. 🌱🌱🌱

@olgafriends4578 4 года назад

Thanks, Rob the best animation is yours. Will try

@RobsAquaponics 4 года назад

Thanks Olga & have fun with the build. 👍🙂

@NicholeBurke4571 8 лет назад

Brilliant video Rob. I'm just learning everything I need to set up my first starter system and this has been so helpful.

@RobsAquaponics 8 лет назад

Nice one Nicole. Hope the build goes well for you. Cheers, Rob.

@mfanto1 8 лет назад

Just brought my first 6 growbeds online yesterday here in Melbourne. But I used 2 external syphones to drain 3 beds each they work well and are less noisy I find.Maybe a nice one to explane Rob

@RobsAquaponics 8 лет назад

Nice one. Do you have a clip or some shots up online ? Am looking at adding an external to run a few barrels in the system here for the spice plants. Cheers.

@mfanto1 8 лет назад

Thank you for the reply (first one ever from a youtuber) :) If you want you can add me on Skype I'm under the same username there and I can send you some pics or vid there

@RobsAquaponics 8 лет назад

Hi there. I don't skype sorry but you can get me on our FaceBook or G+ pages if that helps. facebook.com/Bitsouttheback plus.google.com/u/0/+RobBob/posts Cheers 👍

@glenngoss9464 4 года назад

Thanks I can have ago and try making myself very helpful

@RobsAquaponics 4 года назад

Hope the build went smoothly Glenn. Cheers.

@michaelkindscherm4265 8 лет назад

Very nice demo Rob

@RobsAquaponics 8 лет назад

Thanks Michael. 👍😊

@TyJohnson 4 года назад

Great video but I wanted to toss in a bit of info on how glue and primer works. The primer doesn't just clean the pipe. It has a reaction with the pipe that softens (almost melts it) it so that when you add the glue it actually "welds" (for lack of better word) the two pieces together. If you only use glue then the glue is the only thing sealing the pipe that that will leak eventually. I know it's not that important but thought you might find it interesting.

@RobsAquaponics 3 года назад

Cheers mate.

@danielmolineux3644 7 лет назад

Aww man, I was hoping for a siphon I could use to move bells

@bethel99899 8 лет назад

Much love from sunny California. Thanks

@steveweikel5014 4 года назад

I have my 6 IBC containers all connected to the same drain and have an external riser pipe with a siphon setting my water level and it drains to my sump tank. Has worked flawlessly for 5 years now. No moving parts or ways to stop working.

@RobsAquaponics 4 года назад

Nice one Steve.

@stephs1571 5 лет назад

Great video, very well explained! Thank you!

@RobsAquaponics 5 лет назад

Hope it helps you out some Steph. Happy growing.

@brandoncramer9012 8 лет назад

very cool thank you. About to embark on my aquaponics journey. cheers!

@RobsAquaponics 8 лет назад

No problem Brandon & hope the build goes well for you mate 👍

@anamikasinha5237 5 лет назад

Excellent video sir

@RobsAquaponics 5 лет назад

Thanks Anamika.

@miks976 8 лет назад

Hey Rob great clip, i had my G/B,s on timers off at night and if it stops at the wrong cycle you have a G/B full of water, so I drilled small hole just above bulk head and like your cap is doing slowly drain the lowest point and in the morning all beds where fully drained and a new cycle again and on and off in intervals during the day without affecting the bell syphon. Makes me want to get back into it..

@RobsAquaponics 8 лет назад

Hi Michael. 😃 Good time to pop some trout in if you do decide to resurrect it mate 😉 Hope all's well Michael. Rob