Тёмный
No video :(

How To Make A Cheap Track Saw Easy DIY 

Mr.Vereshchak
Подписаться 351 тыс.
Просмотров 1,5 млн
50% 1

Welcome to Mr.Vereshchak channel:
On this channel you can see:
To support my channel and for the new projects PayPal: Vereshchak.Mr@gmail.com
▶ Woodworking
▶ Work with metal
▶ Homemade
▶ Awesome ideas
▶ DIY
▶ Instagram: / mr.vereshchak
▶ My email: vereshchaktt@gmail.com
▶ Previous videos - • Workbench Leg Vise HOM...
▶ support my channel - PayPal: Vereshchak.Mr@gmail.com
▶ Subscribe on my channel - / @mr.vereshchak

Опубликовано:

 

27 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 409   
@davidhamann1300
@davidhamann1300 Год назад
yes, it is a very nice setup. my first "track saw" was home made. nothing at all like these new "tracks". it consisted of a scrap piece of ¼" hardboard 8" wide and a piece of scrap wood ¾" thick and 2" wide with 1 edge straight. attach the straight wood to the hardboard with screws. take your saw and run it down your track to set a precise distance from the blade to the edge of the saw. to use, place the cut edge on your marks, hold in place with a C-clamp at each end and cut away. inexpensive and right on the marks. time though to upgrade mine and add either 40 grit sandpaper or rubber strips to the bottom so i can store the clamps away. thanks for the idea on using rubber strips!
@EyeShopOptical
@EyeShopOptical Год назад
This is a valuable addition to my woodwork collection ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
@BoldWittyName
@BoldWittyName 2 года назад
For the investment of time and material, I think I'd just buy one. Great build and great vid tho!
@wojciechzielinski4319
@wojciechzielinski4319 4 года назад
Next to woodland ambiance, whales songs and bushcraft stuff this channel is simply relaxing me. No froth, no bloviating, no longueur. Always clean and safe workbench. Essential showing only. More power to your elbow! Grats!
@mr.vereshchak
@mr.vereshchak 4 года назад
Thanks)))
@desparky
@desparky 4 года назад
Fantastic job. I've been trying to think of a way of improving my timber saw guide with Aluminium. Your ideas are great. To stop dragging your saw power lead over the edge, throw it on your shoulder before you cut. Thanks for sharing.
@kennethturner7942
@kennethturner7942 3 года назад
Probably the first video of a DIY track saw that made the most sense to me. Good job and thanks for uploading this video.
@mr.vereshchak
@mr.vereshchak 3 года назад
Thanks a lot 😊
@BigMacheteBM
@BigMacheteBM 4 года назад
it's hard to believe it doesnt ever move at all just with 2 pieces of hvac piping rubber.. but if it doesn't you are definitely the man! thanks for sharing!
@guatemalanpatzun2965
@guatemalanpatzun2965 4 года назад
Excelente trabajo que Dios lo bendiga por enseñarnos algo muy bueno. Saludos de Patzún Chimaltenango Guatemala.
@cboliver
@cboliver 3 года назад
Some videos have presenters who are masters at orally conveying their message. Some you can't stand to listen to their jibberish. Some have the perfect composition of the proper view, great lighting, steady camera; others don't. Your video was perfect in SO many ways. From an educator's perspective A+. I always challenge my grad students to do a silent presentation. It is hard. It requires planning and the ability to be the performer and viewer at the same time. You need to thank all the teachers who guided you to become a GREAT presenter! (in so many ways)
@mr.vereshchak
@mr.vereshchak 3 года назад
Thanks a lot 😊😇🙏
@IntelWond
@IntelWond 4 года назад
Отличная работа! У меня точно такая же пила; если дойдут руки и хватит таланта - нужно будет попробовать сделать подобную шину.
@you2449
@you2449 3 года назад
I never seen so many Clamps in my life !
@Realism91
@Realism91 4 года назад
Have you thought about taking a chunk of aluminum cutting a kerf in it and putting two threaded holes for knob bolts, all you'd have to do is side it on the side of any saw and tighten the two knobs.
@Realism91
@Realism91 4 года назад
Your video was the closest thing to my idea yet have been trying to find someone with it made because it seems to quick to make.
@alfredomarquez9777
@alfredomarquez9777 4 года назад
And then you would not sacrifice losing any cutting depth from the sole thichness, if I undestood you correctly?
@waynemahler2015
@waynemahler2015 4 года назад
Really like this one. Seems much better built and sturdy. So far the best I have seen. Need to make one for my shop. Thanks for sharing this.
@benefitthirteen
@benefitthirteen 4 года назад
One of the nicest shop made track saws I've seen to date.
@titodejesus6238
@titodejesus6238 4 года назад
Nicely done. A little more detail regarding materials and measurements will be a most welcomed addition
@Bob_Adkins
@Bob_Adkins 4 года назад
The most elaborate shooter I've ever seen, you went to great lengths to make it run smooth. All you needed was a spritz or CRC heavy duty silicone. It's invisible, dries completely in 10 seconds, slick as can be. (don't get any overspray on the floor, or you'll slip)
@1pcfred
@1pcfred 4 года назад
Silicone notoriously ruins wood finishes. So don't get any on any wood you plan on finishing.
@Bob_Adkins
@Bob_Adkins 4 года назад
@@1pcfred Yes, you don't spray it on your material, just a light spritz on your saw's sole plate. The pure stuff is not nasty, It's invisible and evaporates in 2-3 weeks and you have to re-apply. Back in the old days, wax with silicone was very nasty on wood, hard to get off. The pure stuff comes off wood if you set it in the sun a few hours or wipe with alcohol.
@1pcfred
@1pcfred 4 года назад
@@Bob_Adkins any speck that rubs on can cause fisheyes. Not always important. Not everything requires a fine finish.
@dylanbennett3851
@dylanbennett3851 4 года назад
By far one of the best diy saw tracks I've seen!(I've been researching to build my own, I think I'll copy yours 😉) I can tell your a perfectionist like myself, great video! Thanks!
@TeaKayful
@TeaKayful 4 года назад
you're a perfectionist?
@RareParts3769
@RareParts3769 4 года назад
@@TeaKayful In English.
@przemkolama
@przemkolama 4 года назад
I agree on 100%
@dylanbennett3851
@dylanbennett3851 4 года назад
@@TeaKayful ya it's a curse at times lol, I want to make every detail perfect and it will keep me up at night if I can't 🤦‍♂️
@wanaraz
@wanaraz 3 года назад
@@TeaKayful LOL. He did not say in writing but just in his work.
@Anne6621
@Anne6621 4 года назад
ok finally a DIY track thats worth building,,, i won't lie , i will copy this and tell all my friends it was my design lol and 238 thumbs down , are you kidding me
@alfredomarquez9777
@alfredomarquez9777 4 года назад
Yes, there are around 238 Unappreciating idiots around...
@BDL090754
@BDL090754 3 года назад
Wow, easily the best DIY track saw make, I've seen so far, great job.
@user-eo9cn7ff3z
@user-eo9cn7ff3z 4 года назад
Всё гениальное просто. Спасибо!
@willybaetens3260
@willybaetens3260 4 года назад
This is realy a splendit idea.👏 Cheap, as long as you wish, and cheaper as from a retailer. Willy from Belgium.
@albertalbertov7671
@albertalbertov7671 3 года назад
Идея с кромкой, с резиновой полоской и салом, выше всех ПОХВАЛ !!!!!!!!!!!!! SUPER
@charliecampbell9212
@charliecampbell9212 4 года назад
You have to be one of the most intelligent carpenter on youtube i just love every thing you put up i will definitely make one of those Thank you very much lots of Irish luck for the future and keep those videos coming
@mr.vereshchak
@mr.vereshchak 4 года назад
Thank you 😊💪
@juanmgomezb
@juanmgomezb 4 года назад
Excelente herramienta. La copiaré para mi sierra. Felicitaciones. Excellent tool. I will copy that for my circular saw. Congrats
@mr.vereshchak
@mr.vereshchak 4 года назад
Thanks you)
@SpaceMonkey2385
@SpaceMonkey2385 Год назад
Really awesome track saw, that being said, the amount of time and materials used, could have had a decent knock-off track saw.
@Judjin_the_first
@Judjin_the_first 3 года назад
Самая лучшая самодельная шина) Спасибо большое) У меня пила уже с пазами для шины, просто переверну алюминиевый профиль)
@tcmixman
@tcmixman 3 года назад
This is indeed the best DIY track saw video I have seen!
@mr.vereshchak
@mr.vereshchak 3 года назад
Thank you 😊 😊😊
@dlk4318
@dlk4318 3 года назад
wow, many of the market famous manufacturers should envy you
@mr.vereshchak
@mr.vereshchak 3 года назад
😊😊😊
@sabinoobregon9294
@sabinoobregon9294 Год назад
excelente trabajo felicitaciones por difundir tus conocimientos
@louiesuyu5181
@louiesuyu5181 2 года назад
Great ideas best track saw i've seen.thanks for sharing
@MrBlouch
@MrBlouch 4 года назад
Très bonne idée pour les rails !! Surtout quand on voit le prix que ça coûte. C'est toujours un plaisir de regarder tes vidéos ! 😉
@mr.vereshchak
@mr.vereshchak 4 года назад
Merci beaucoup)))
@thedieiscast9729
@thedieiscast9729 3 года назад
Best diy track that I have seen
@mr.vereshchak
@mr.vereshchak 3 года назад
Thanks a lot))
@GNU_Linux_for_good
@GNU_Linux_for_good 4 года назад
*Cool* - I like the steel plate best, for easy detachment of the saw. Very versatile.
@AngelHernandez-ey4wn
@AngelHernandez-ey4wn 4 года назад
You are a master.....i’m gonna follow your idea.....
@stormman8393
@stormman8393 2 года назад
This is very, very good
@davidelliott5843
@davidelliott5843 3 года назад
I made a circular saw crosscut jig. It worked, but the saw sole plate was not parallel to the blade. It was not immediately obvious, but getting that right made huge difference. I like your idea but would stick the runner to the stainless plate with a PU sealant. There will be plenty of time to get it parallel before it cures.
@argeancomics3291
@argeancomics3291 4 года назад
You started the video exactly as me in my workshop. This track saw was made for me. Starting doing one right now..
@christofix
@christofix 4 года назад
The rubber is a great idea!!! Thanks for inspiring me!
@nbidnm
@nbidnm 4 года назад
Best track saw build i've see yet.
@luckymsimang3879
@luckymsimang3879 2 года назад
amazing jig thank you very much for the idea
@johnjackson-pu3xo
@johnjackson-pu3xo 4 года назад
Would it be possible to get a materials list for that great saw guide
@traubensaft2429
@traubensaft2429 3 года назад
wood, aluminium, a steel plate, plastic and rubber, glue and screws. no problem
@gustavochiozza6465
@gustavochiozza6465 4 года назад
The best DIY I ever see. Congrats. 👏👏👏👏👏
@KLIDIMARIA
@KLIDIMARIA 4 года назад
Professional grade instalation.The most essential track saw guide i've ever seen.My congatulations !!! @Mr.Vereshcack
@johncarter9067
@johncarter9067 4 года назад
best shop made saw track I've seen
@mr.vereshchak
@mr.vereshchak 4 года назад
Thank you))
@SiFace001
@SiFace001 3 года назад
Хорошая реализация!!! и скользит пила по ПВХ, и нескользкая подошва шины, и сама приставка на пилу добротная!!
@boblewis5558
@boblewis5558 4 года назад
Brilliant Job! And very simple as well. Easily adapted with another plate for a router! Cool!
@mr.vereshchak
@mr.vereshchak 4 года назад
Thank you!)
@mr.vereshchak
@mr.vereshchak 4 года назад
Thank you!)
@fco.javiergonzalez7166
@fco.javiergonzalez7166 2 года назад
Muy buen trabajo 👍 👏 👌
@ladykenja2700
@ladykenja2700 4 года назад
- Excellent work ! ! ! Thanx 4 sharing.
@user-pg9vb3br3n
@user-pg9vb3br3n 2 года назад
Прикольный стул из коленвала.
@davorinrusevljan6440
@davorinrusevljan6440 4 года назад
Cool! I was wandering if you are going to permanently attach a saw guide on the saw plate, and then saw your idea to use attachment points for the edge guide. Made my day!
@Ohm51
@Ohm51 4 года назад
True dat.
@BirdmanNorfolk
@BirdmanNorfolk 4 года назад
@Ezaarkash if you were a woodworker you'd understand, this is such a simple but accurate time and money saving design, excellent effort!
@MontyCarlossal
@MontyCarlossal 4 года назад
Very clever - well done
@spuds6423
@spuds6423 4 года назад
Cool build anyway 👍👍👍👍👍
@stevewalker9888
@stevewalker9888 4 года назад
Clever , very clever😎👍
@JoSimpleWorks
@JoSimpleWorks 2 года назад
Great job!🙏🥰👏👍
@garysouza2277
@garysouza2277 4 года назад
Nicest DIY track saw I've seen yet. Well done!! But it broke my heart to see you cutting off that live edge... ;-)
@kasper2235
@kasper2235 4 года назад
Me too. Maybe I would use contact glue in different way, but still this is best track saw project on RU-vid that I've seen so far.
@evertola3598
@evertola3598 3 года назад
Nice video content! Excuse me for butting in, I would love your thoughts. Have you researched - Schallingora Dexterous Programme Scheme (Sure I saw it on Google)? It is a smashing one of a kind guide for building any shed in no time with no experience minus the normal expense. Ive heard some unbelievable things about it and my cousin got great success with it.
@homemadetools
@homemadetools 4 года назад
Nice! That PVC edging is a good idea.
@stevecuthbert8856
@stevecuthbert8856 4 года назад
Great design for your track saw. I also like your work bench with the holes for hold down clamps. You just got a new subscriber my friend.
@mr.vereshchak
@mr.vereshchak 4 года назад
Thanks 😊
@andrec8434
@andrec8434 4 года назад
Congratilation, it's the better. Very easy.
@DimchBosch
@DimchBosch 4 года назад
Чудово!!Файна робота👍🏼
@Hightreewalker
@Hightreewalker 3 года назад
Awesome! VWDB = Very Well Done Bro
@YusmanEnumbiwebsite
@YusmanEnumbiwebsite 2 года назад
Wow. Is Amazing good.
@user-ri7ux7oy5m
@user-ri7ux7oy5m 3 года назад
Beautiful it's so what I wanna looking for
@smileyhomeimprovementsjohn6165
@smileyhomeimprovementsjohn6165 4 года назад
Excellent job.
@jorgeehv
@jorgeehv 3 года назад
EXCELENTE haré una para mi cortadora, gracias por enseñar, muy bien
@mr.vereshchak
@mr.vereshchak 3 года назад
Gracias)
@user-fg2qp4sz3v
@user-fg2qp4sz3v 4 года назад
Отлично получилось!!!
@cezarsoares1741
@cezarsoares1741 4 года назад
Nice project. Can you show how you made a piece to connect a hose dust colector?
@lanceg133
@lanceg133 4 года назад
Nice use of the rubber tape!
@menwood4582
@menwood4582 4 года назад
Золотые руки!!! Молодчина!!! Лайк!!!
@twoherbs
@twoherbs 3 года назад
Looks like I have a project this weekend. The only thing I might change (just because of the materials on hand) is stainless and going to a carbon fiber infilled plastic that I have handy.
@mr.vereshchak
@mr.vereshchak 3 года назад
Interesting to look 😊
@mattberg916
@mattberg916 3 года назад
Very nice! At the end I thought you might be installing pins or dowels that would temporarily line the two for extra long cuts.
@devangovender898
@devangovender898 3 года назад
Completely brilliant - I loved this hack.
@hhattingh
@hhattingh 3 года назад
This is what I am talking about!! Thank you good sir!
@nelcyvieira3225
@nelcyvieira3225 4 года назад
Wonderful!!!
@pikifrino
@pikifrino 4 года назад
Very good job! Thank u 4 sharing with us!
@aday1637
@aday1637 3 года назад
Time and materials on this project exceed the cost of one already to go on Amazon. Priced out aluminum channel lately?
@j.m.castilla7150
@j.m.castilla7150 3 года назад
fantástica guía , gracias pronto haré mi guía así
@jtsands2008
@jtsands2008 4 года назад
Wow, top notch quality and ideas. Very nice video. I hope to copy this real soon. Need to get some supplies first. I don't want to skimp on any of it.
@mr.vereshchak
@mr.vereshchak 4 года назад
Thank you) Good luck 😊👍
@robertbalkovec4087
@robertbalkovec4087 4 года назад
Nice. I will borrow your idea :) For big cuts I will not use table saw anymore :)
@ZaarsShed
@ZaarsShed 4 года назад
Two questions please: 1. What's the saw model? 2. Gluing the wooden piece guide to the saw base, how did you make sure it's parallel to the track edge? Just eye-balling? Thank you.
@mr.vereshchak
@mr.vereshchak 4 года назад
Hi)) 1) Makita HS7601 2) I measured it few time 🙂
@beberdaurado6417
@beberdaurado6417 10 месяцев назад
C'est du bon travail mais pour moi, je serais en perte de profondeur de coupe!! La planche est trop épaisse !! Votre travail est très bon en tout cas!!👍👍👍👍👍
@sergba4582
@sergba4582 4 года назад
Верстак Супер . Распиловочный стол Супер. Уплотнитель самоклеящийся не держится на материале(у меня😪). Сало заменил на автомобильный воск.
@lllBRATlll
@lllBRATlll 4 года назад
Та можно и свечкой повозюкать)))
@comfycomfy5436
@comfycomfy5436 4 года назад
Отличная идея однозначно Like 👏👏👏👍👍👍😀.....
@TheADRIANOVALENTINO
@TheADRIANOVALENTINO 4 года назад
Thats a pretty sick track
@garcia678
@garcia678 4 года назад
GRACIAS POR EL VÍDEO Y APORTE, EXCELENTE TRABAJO....
@user-wt5fq1jq7r
@user-wt5fq1jq7r 2 года назад
Самая лучшая конструкция из всего что я видел!
@aaudain1
@aaudain1 4 года назад
Very interesting , great job putting that together lots of work and patient , save us a lot of money
@stevehall5357
@stevehall5357 Год назад
Great idea! Maybe a material list would be helpful.
@mr.vereshchak
@mr.vereshchak Год назад
Hi! Thank you ☺️ Unfortunately I don’t have a material list for it 🙁
@cristiandasilvabrito4871
@cristiandasilvabrito4871 4 года назад
Esse camarada manja na marcenaria !!!!
@user-pw3zi3hw9q
@user-pw3zi3hw9q 4 года назад
За описание на русском отдельное спасибо Бро!!! Лайк подписка!!!)
@5213alexis
@5213alexis 3 года назад
Good job à great idea
@williamhanna5224
@williamhanna5224 4 года назад
Excellent video !
@mr.vereshchak
@mr.vereshchak 4 года назад
Thanks))))
@elusivemite
@elusivemite 4 года назад
Probably the best home made tracksaw video I've seen. Wouldn't trade my tracksaws in though. Have you considered a rebate on the lower cut edge to install a splinter strip on
@valveman12
@valveman12 3 года назад
Those are very nice saw guides. Congratulations😁
@Lethandstry
@Lethandstry 4 года назад
Very good working!
@user-fx3hw6lv3s
@user-fx3hw6lv3s 4 года назад
Отличное видео
@celticat61
@celticat61 4 года назад
Mate I love what you do! Your ingenuity is outstanding. Love and strength from Bunbury West Oz.
@Ohm51
@Ohm51 4 года назад
I don't quite get how that blue PVC edge banding with the rolled edge helped matters. Did he sand, or route that edge off somehow?
@pakistaniallrounder9359
@pakistaniallrounder9359 4 года назад
Very good idea
@abbii1661
@abbii1661 4 года назад
like how you screw in those eye hook. learned a trick
@teacheng3795
@teacheng3795 4 года назад
Yes, just perfect! Well done once again. Another big like!!! David, Melbourne, Australia.
@mr.vereshchak
@mr.vereshchak 4 года назад
Thanks))) wow, Australia! that's great
@teacheng3795
@teacheng3795 4 года назад
@@mr.vereshchak You are welcome! I look forward to seeing your videos and I always learn something. You have great ideas and have the skills to demonstrate them. Thank you. David
Далее
The Fan’s Fang Skin🔥 | Brawl Stars Sneak Peek
00:16
Amazing !! Circular Saw Guide
16:59
Просмотров 6 млн
Make a simplified track saw
6:35
Просмотров 92 тыс.
Does the average DIY'er really need a Plunge Saw?
19:03
Multifunctional Sawhorses and Mini Workbench
22:44
Просмотров 884 тыс.
3in1 Multi Tool Track Guide / Circular Saw Guide
21:38
Super Simple Track Saw
5:46
Просмотров 2,9 млн