Тёмный

how to make a diy wire tensioner tool /new ideas/ 5-minute crafts/ tips 

JENNI.SWISS
Подписаться 75 тыс.
Просмотров 486 тыс.
50% 1

JENNI MERCHANDISE: www.jenni.swiss/shop.php
INSTAGRAM: jenni.swiss...
WEB: www.jenni.swiss/
Do it yourself and this is a simple and useful device!
It's that easy to build a wire tensioner yourself. a raw and a metal pin and off you go. so hose bridges can be fastened and other things connected. Build your own wire binder and spend money on expensive screw bridges!
Over Time von Audionautix ist unter der Lizenz Creative Commons Attribution license (creativecommons.org/licenses/...) lizenziert.
Interpret: audionautix.com/
Direct to Video von Chris Zabriskie ist unter der Lizenz Creative Commons Attribution license (creativecommons.org/licenses/...) lizenziert.
Quelle: chriszabriskie.com/dtv/
Interpret: chriszabriskie.com/
Banjo Short von Audionautix ist unter der Lizenz Creative Commons Attribution license (creativecommons.org/licenses/...) lizenziert.
Interpret: audionautix.com/
5-minute crafts tips experiment new ideas maker

Кино

Опубликовано:

 

3 ноя 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 149   
@SaranganiBob
@SaranganiBob 4 года назад
Just when you think you've already found the best and simplest hose clamp maker out of many other great designs... another one comes along :)
@mikevanin1
@mikevanin1 3 года назад
The slotted crank is a fine idea. Watch similar videos to see a much easier way of pre-forming the wire loops. You only have to do it your way if you can't fit the pre-formed wire over one end of the pipe.
@amathonn
@amathonn 3 года назад
Nicely done. Ironically, I thought you were building something to use on a fence tensioner and up until near the end you were following same steps I planned to use in making THAT tool!
@IngosWerkstatt
@IngosWerkstatt 6 лет назад
Hammer geil, dies ist auch wieder etwas, was man haben sollte wenn einem mal die Schellen ausgehen, oder man gerade keine passende Rohrschelle hat. Respekt Jenni!
@virriki627
@virriki627 6 лет назад
Yes, I like your video and the idea! The same principle as the “clamptite”, but much more simple construction and cheap implementation! Thanks for the good DIY idea.
@JENNISWISS
@JENNISWISS 6 лет назад
thx for your nice feedback😊🍀
@holzhandwerk_ak
@holzhandwerk_ak 6 лет назад
Sehr cleveres Werkzeug, Lukas. Danke fürs Zeigen.
@Baschroe
@Baschroe 6 лет назад
Jubb, sehr geil! Kannte ich so auch noch nicht. Wieder was gelernt! 👌👍
@5187161
@5187161 6 лет назад
Baschro I'm
@arturszopa4077
@arturszopa4077 6 лет назад
Auf jeden Fall viel besser gefilmt als das Original. Thx
@ewap-by-daniel
@ewap-by-daniel 6 лет назад
Sehr schönes Video! Und die Schlauchbride aus Draht ist auch prima. Wasser marsch!
@user-nf2ms7ux6j
@user-nf2ms7ux6j 3 года назад
simple but very useful.
@vjchinchilla
@vjchinchilla 4 года назад
Saludos desde Venezuela. Muy didáctico y excelente aporte. Dios guíe tus pasos.
@viswanathanramakrishnan7613
@viswanathanramakrishnan7613 4 года назад
Super cool tool : You have complete work shop setup to do all the cutting and drilling but I cannot imagine ti fabricate it at home hence I had to depend upon workshop fellows. Kudos to you.
@BulatsSchmiede
@BulatsSchmiede 5 лет назад
Sehr geil !😎👍Praktisch und einfach !Top Arbeit!😎🤙
@bruceg1845
@bruceg1845 6 лет назад
This vid is so superior to most -no holding the camera with your left hand while trying to work with your right as the picture trembles out of focus all over the place, love the close ups and the editing of excess...bruce
@NEUE.WERKSTATT
@NEUE.WERKSTATT 6 лет назад
hab sowas noch nie gesehen... sehr praktisch!!! LG Robert
@AlexanderDyer
@AlexanderDyer 6 лет назад
That is a pretty neat tool and clamp. Thanks
@peterswerkstatt9853
@peterswerkstatt9853 6 лет назад
Ersetzt ganz gut eine Schlauchschelle! Gut gemacht!
@anthonytriolo3643
@anthonytriolo3643 4 года назад
Addition :great workmanship you are are a real tradesman.
@hemelmac21
@hemelmac21 4 месяца назад
that 80s detective music 👌
@PastorPalaciosMartinez
@PastorPalaciosMartinez 3 года назад
One of the best i have seen ever, thanks.
@pascal.woodwork6268
@pascal.woodwork6268 6 лет назад
Toll hab erst zum Schluss hin gecheckt was es wird ... klasse
@Sascha_LB
@Sascha_LB 6 лет назад
Grübel... irgendwie habe ich ein Déjà-vu. Schönes Video und geniales Werkzeug. Gehört auf die ToDo-Liste
@leonardogranados2733
@leonardogranados2733 5 лет назад
Good job; nice, professional and clean
@TheMuzShop
@TheMuzShop 6 лет назад
Very cool idea and useful tool. Awesome work. 👍
@angargoy7181
@angargoy7181 6 лет назад
Very good the video seems a good homemade tool
@christianjung2410
@christianjung2410 6 лет назад
Tolles Video !
@erikstaack2597
@erikstaack2597 3 года назад
Die Grundsätzliche Idee habe ich schon in einem anderen Video gesehen und mir meine Version schon gebaut. Diese hier ist Handwerklich gut und Funktional.
@HABU
@HABU 6 лет назад
Geniale Sache mein Freund!
@alexissalvador6296
@alexissalvador6296 4 года назад
Buen video excelente fabricación de la herramienta
@benb555
@benb555 4 года назад
Brilliant...the easiest, best way making this simple clamp tool I found on RU-vid. Einfach brilliant ...der eifachste weg fuer dieses "klemm" werkzeug dad ich fand in RU-vid
@Mikhandmaker
@Mikhandmaker 6 лет назад
Nice idea! Bravo!!
@AndyCPugh
@AndyCPugh 6 лет назад
Great cinematography! Nice work!
@Cactusworkshopchannel
@Cactusworkshopchannel 6 лет назад
Very interesting my friend!! cool technique
@francogarciaherrera1817
@francogarciaherrera1817 4 года назад
Amigo gracias por tú video, fue muy útil para mí, dios te bendiga
@romo4301
@romo4301 6 лет назад
Ein praktisches und kraftvolles Werkzeug. :-)
@normfacey104
@normfacey104 4 года назад
Nice camera work, great tool. A hand grinder would work well making it too.
@martinb.3233
@martinb.3233 6 лет назад
Wieder was dazu gelernt. Mach weiter so.
@dwaynegustafson4920
@dwaynegustafson4920 6 лет назад
Martin Braumann h
@leonardoboasorte4039
@leonardoboasorte4039 4 года назад
It's amazing!!!! Congratulation!
@JohnMadeit
@JohnMadeit 6 лет назад
Cool idea. No more expensive jubilee clips needed 😀
@vasileseitan6893
@vasileseitan6893 6 лет назад
Good job,,,,,,,,,,,,SUPER JOB,,,,,,,,,,,,,
@priyankajayasinghe4455
@priyankajayasinghe4455 6 лет назад
SUPER JOB
@JENNISWISS
@JENNISWISS 6 лет назад
😌
@sukaryadi263
@sukaryadi263 3 года назад
Nice, good idea, Thanks sir
@mihumus
@mihumus 6 лет назад
Very clever 👏👏👏
@woodworkingfelix
@woodworkingfelix 6 лет назад
Perfect Tool
@AnnasWorkshop
@AnnasWorkshop 6 лет назад
Geil geschnitten Lukas!
@neli-null-neli9499
@neli-null-neli9499 6 лет назад
Well Done!
@crowjarofranco5059
@crowjarofranco5059 4 года назад
Beautiful! So simple! It's great!
@joserobertomartins8794
@joserobertomartins8794 6 лет назад
Very good.
@kellyelizabetcoto990
@kellyelizabetcoto990 4 года назад
Very good!!!
@Kreith32
@Kreith32 6 лет назад
Habe mit dem Titel nicht ganz verstanden was es wird aber gute Sache. Hält das auch ordentlich? Kann mir vorstellen daß eine Schraubschelle mehr Druck ausübt. Die Beleuchtung der Detail Szenen gefällt mir gut. Ähnlich meines LED P7 Lensers. Sehr schön. Grüsse aus Bayern, Arne
@anthonytriolo3643
@anthonytriolo3643 4 года назад
Its nice to have all those tools,no explanation of materials . But nice work.
@ilmondodimassi
@ilmondodimassi 6 лет назад
Interessante 👍
@user-wi4xh6cn3v
@user-wi4xh6cn3v 4 года назад
🔥🔥🔥💪 Thanks
@user-es7cw1xu5d
@user-es7cw1xu5d 6 лет назад
Muy buen vídeo 👌👍👍👍
@JENNISWISS
@JENNISWISS 6 лет назад
🍀
6 лет назад
Schönes Video, die Vorrichtung kannte ich allerdings schon aus einem Video hier auf YT.
@crazytimber1767
@crazytimber1767 6 лет назад
Wieder was neues dazu gelernt. Klasse Video Jenni Grüße von meinem Kanal
@bingbingbongbong2615
@bingbingbongbong2615 6 лет назад
Bravo
@marciooppido206
@marciooppido206 6 лет назад
The best
@EricLarsWermerssen
@EricLarsWermerssen 6 лет назад
I like the style of your videos dude, great pics & nice music, almost perfect. :)
@curtismcdonald6461
@curtismcdonald6461 2 года назад
Can you help me like I’m a fifth grader? I want to envision how this works. Do you have a follow up video that demonstrates this operating. I’m trying to find a tension device and create it but I can’t envision how it creates the tension
@friedaspyder8485
@friedaspyder8485 4 года назад
10 fingers, 100% success!
@WorldofElectronicswoe
@WorldofElectronicswoe 6 лет назад
Geili idee komplimänt das hani ou noni kennt und ben Sanitär :-)
@machatte3522
@machatte3522 6 лет назад
Nice
@tl314Thomas
@tl314Thomas 6 лет назад
ein super cooles teil sowas habe ick noch nicht gesehen Respeckt
@JENNISWISS
@JENNISWISS 6 лет назад
danke dir
@jeffflanagan2814
@jeffflanagan2814 5 лет назад
What type of hoses are you using this for?
@WildmanTech
@WildmanTech 6 лет назад
Not a bad approach. What's a screw bridge?
@f4tboy99
@f4tboy99 5 лет назад
Next step is to add a ratchet on the handle, would be great! Nice work!
@michaelthibault7930
@michaelthibault7930 5 лет назад
Tools are made up of other tools, so why not modify a ratchet extension to take up the wire, cut the extension so that it fits through the transverse hole and circumferentially groove it so that it can be held captive in the tool by a spring clip, then add stops to hold the ratchet handle against the tension in the wire during the flip-and-cut step?
@GoBuildIdeas
@GoBuildIdeas 6 лет назад
Coole idee, gutes editing! Schon gut wie man mit jedem Film mehr Erfahrung im Filmen und Schnitt sammelt, oder?
@romilsonsoares1199
@romilsonsoares1199 Год назад
Top
@tenzackyogi1742
@tenzackyogi1742 3 года назад
How many foot-lb torque this gives? When it comes to fencing, torque is necessary..
@angelsandoval6493
@angelsandoval6493 6 лет назад
The best youtube video. Congratulations Mr.
@JENNISWISS
@JENNISWISS 6 лет назад
hey👍 thx for your nice feedback
@escaflowne33055
@escaflowne33055 6 лет назад
diy for some people lol. beautiful camera work and editing.
@JENNISWISS
@JENNISWISS 6 лет назад
thank you😊
@michaelthibault7930
@michaelthibault7930 5 лет назад
Yes, distinctive style visually, overall. First view of this channel's videos, and 9 months after this issue, so I don't know whether an in-house style sheet has (been) developed, but you're not far from one anyway, so carry on. Some nice touches: the finished tool in isolation; close-up views showing the hands in the various processes; real-world-seeming lighting (though you could benefit from a large 'fat' fill, even if only a 1 metre dia. disc of mylar); and, the 'story' structure. Each of these could be built out a bit more. For example, short clips showing setting of stops, depths, measurements, etc., then a no-gloves-no-power 'psych' of the power tool work (at the face), followed by the expected gloves-on-power-on working of the piece…
@chrisbroesky2932
@chrisbroesky2932 2 года назад
Works better and quicker than that 60 dollar tool they make
@annettestoltenberg4334
@annettestoltenberg4334 6 лет назад
Schlauchschelle geht auch warum so ein Aufwand? Hat mir sehr gut gefallen Dein Video , freue mich immer über was ich noch nicht kannte.
@Baschroe
@Baschroe 6 лет назад
Annette Stoltenberg also so ein draht passt für jeden schlauchdurchmesser. die passenden schellen hat man meistens-wie üblich- gerade nicht zur hand 😂👍 klasse idee. gefällt mir auch sehr.
@annettestoltenberg4334
@annettestoltenberg4334 6 лет назад
Mir gefällt das auch nur warum ist mir nicht klar. So viele Schellen braucht keiner, so eine perfekte Sache zu bauen da gehört eine Menge Wissen zu. Metallbau kann nicht jeder . Ist ja auch Egal , Video war klasse das ist das wichtigste.
@gerdbetzinger2100
@gerdbetzinger2100 6 лет назад
Annette Stoltenberg o
@JohnWilliams-bi3hn
@JohnWilliams-bi3hn 3 года назад
Easy when you have all the tools! Alternativey, buy them for $2!!
@heikos9848
@heikos9848 6 лет назад
Cooles Teil! Meist hat man(n) die passende Schlauchschelle ja nicht zur Hand ;-) LG Heiko
6 лет назад
Das exakt gleiche Teil neulich auf RU-vid schon gesehen - nur da waren die Kommentare überwiegend negativ. Muss wohl an der Qualität der Filmerei liegen... 😋
@genesisjose2124
@genesisjose2124 3 года назад
Brasil..pecuária
@superdupersalem
@superdupersalem 4 года назад
Have you heard of the Cortool?
@Howardtripper
@Howardtripper 6 лет назад
nice for cv boots
@JENNISWISS
@JENNISWISS 6 лет назад
yep👍🍀
@carlopelzen6515
@carlopelzen6515 5 лет назад
Hi there, can you tell me how many kilos this tool can clamp?
@JENNISWISS
@JENNISWISS 5 лет назад
I did not test it
@cluelessbeekeeping1322
@cluelessbeekeeping1322 4 года назад
That's a cool tool, by chance, do you sell them?
@JENNISWISS
@JENNISWISS 4 года назад
no. i make only youtube
@Freekniggers
@Freekniggers 4 года назад
I like the ingenuity but it doesn't look tight at all. Not even the least bit.
@ibanezjorge771
@ibanezjorge771 6 лет назад
The anvil is bad ass
@shrconstruction
@shrconstruction 3 года назад
I realize you wanted to play with the plasma cutter....but the bandsaw would have been faster and more accurate.....same thing with the teeth grooves.
@nonyobussiness3440
@nonyobussiness3440 4 года назад
Cool. For irrigation it’s not practical. The wire isn’t able to be retightened
@s7k6s
@s7k6s 4 года назад
All that time and effort, I could be to the shop and back. Could buy 4 tensioners for 12 bucks!
@JENNISWISS
@JENNISWISS 4 года назад
ok😜👍
@HeathLedgersChemist
@HeathLedgersChemist Год назад
Are microphones really that expensive these days?
@viktorka2111
@viktorka2111 Год назад
Недостатки: - у воротка слишком длинная ручка; - большой расход проволоки. Отверстие надо перенести ближе к конусу и вместо воротка использовать гаечный ключ; - проточки на конусе лишние. Можно без них.🤔😒
@JENNISWISS
@JENNISWISS Год назад
danke für deine guten ideen👍👍👍
@AMC-eq3jr
@AMC-eq3jr Год назад
Make Wire Tighteners Great Again - MWTGA
@deangelorafaelperez1028
@deangelorafaelperez1028 3 года назад
Desperdiciaa mucho alambre tienes que hacerla mas eficiente
@jbnrusnya_should_be_punished
@jbnrusnya_should_be_punished 6 лет назад
Nice. But that means you never tighten your hoses without so many specific tools.
@bernhard2957
@bernhard2957 Месяц назад
viel zu kompli - sorry, aber beste schellenmontage für jegliche art von schlauch, wie öl, kraftstoff, luft, wasser
@vladimirsemenov9650
@vladimirsemenov9650 5 лет назад
Самый косорукий хомут.
@Freekniggers
@Freekniggers 4 года назад
I bet your files don't last anywhere near as long as they could and should.
@awaksarawak3878
@awaksarawak3878 2 года назад
indonesia jabar hadir izitn subscribe
@bluehaze6132
@bluehaze6132 6 лет назад
I like the tool that you made.. The only thing i don't like is that you are not working safe without any safety gloves
@JENNISWISS
@JENNISWISS 6 лет назад
😉
@josmith4531
@josmith4531 6 лет назад
Don't think he is in the U.S.A. where a splinter causes a lawsuit!
@lordthomastravis1617
@lordthomastravis1617 5 лет назад
You NEVER wear gloves when using rotary tools! EVER!!! If it snatched it its good bye hand/arm !! Life???
@KLeeson
@KLeeson 4 года назад
Well said
@wesm6422
@wesm6422 3 года назад
Check out the Original haywireklamper.com
@gungbayubayubayu554
@gungbayubayubayu554 6 лет назад
Fck viRus
@samp1394
@samp1394 6 лет назад
Cut OFF that chitty music
@JENNISWISS
@JENNISWISS 6 лет назад
+Sam P 😊👍
Далее
DIY LAS MEJORES ABRAZADERAS  /DIY THE BEST CLAMPS
14:58
Просмотров 379 тыс.
Clamptite
8:55
Просмотров 1,5 млн
Прилетели в Дубай
00:17
Просмотров 75 тыс.
Dancing makes everything better 🕺🏼
00:16
Просмотров 2,7 млн
THE BEST CHEAP EASY HOMEMADE FENCE TIGHTENING TOOL.
7:46
DIY welding table
13:44
Просмотров 4,2 тыс.
cara membuat klem kawat untuk selang || hose clamps
6:20
DIY bearing puller with blind holes + test
12:26
Просмотров 10 млн
Clamptite.
13:52
Просмотров 651 тыс.
ABRAZADERAS DE ALAMBRE PARA MANGUERAS
9:32
Просмотров 4,1 млн
DIY simple wire clamp tool from scrap metal
8:19
Просмотров 85 тыс.
Cara Membuat Klem Selang || Pasti Untung Banyak
13:00
Только девушки так умеют😂
0:59