How to Make a Fishing Lure (Musky Crankbait)

Подписаться 6 тыс.

Просмотров 51 тыс.

50% 1

DISCLAIMER: I forgot to mention the dangers of cutting/sanding lead that will create very dangerous lead dust. It is better to melt and pour the lead into the holes, which is what I will be doing in the future.
Making a wooden musky crankbait for a fishing trip to Lake St. Clair. Showing a step by step process a beginner can follow along with to get started making wooden lures. This process can be used for just about any species of fish with minor differences in bait/hardware sizes.
Forgot to mention: You will need 24 hour epoxy (linked blow) if you want your lures to last, 5 minute epoxy breaks down quickly when exposed to moisture and UV light from the sun.
LINKS:
Bench Belt Sander: amzn.to/3SSiJQg
Stainless Steel Wire: amzn.to/3R90DZ0
Japanese Pull Saw: amzn.to/3SSiUuU
Lexan/Polycarbonate Sheet: amzn.to/3sUvE9z
Blank Clear Eyes: amzn.to/49HrtPf
Pre-Painted Eyes: amzn.to/3GbOpIJ
Airbrush: amzn.to/3MWedMD
Airbrush Paint: amzn.to/3uuzFSM
Airbrush Paint Reducer: amzn.to/40Os0L8
24 hr Epoxy: amzn.to/3R92e0W
Split rings (5-7 mm): amzn.to/3MX8INY
Treble Hooks: amzn.to/3sI1wyh
Gear List: www.amazon.com/shop/noblesava...
VIDEOS:
Musky Fishing Lake St Clair with Homemade Lure: • Musky Fishing Lake St ...
FIND ME:
Shop NSO Products: bit.ly/32jLecv
Website: bit.ly/2OQb4kv
Facebook: bit.ly/2MgxBoQ
Instagram: bit.ly/2MhQjw7
*The above links may be Amazon Associate and eBay Affiliate links.

Хобби

Опубликовано:

24 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@chrisd5709 4 года назад

Hey bud nice work! Just a heads up, you never want to sand on lead! Lead dust is a big no! Next time try making your lead holes a little bigger than your weights and seal them in the same way you did here. Really nice job! Stay safe, tight lines bud!

@NobleSavageOutdoors 4 года назад

That's a really good point I didn't even think of. Thanks for the heads up, I am going to add that to the description. Personally I doubt the amount of hand sanding I did on the lead created any significant amount of lead dust here, but honestly I could be wrong. I completely agree it's something that should be considered and not taken lightly. I wanted to melt and pour the lead but was running out of time so decided to do it this way. In the future, that's what I plan to do.

@chrisd5709 4 года назад

Noble Savage Outdoors I’m sure you’re right, no harm no foul. Just wanted you to be aware for future reference. Look forward to future content.

@leearcher6853 3 года назад

I guess Im asking randomly but does someone know of a method to log back into an instagram account? I was stupid lost the login password. I would love any assistance you can give me!

@caseyayaan9294 3 года назад

@Lee Archer Instablaster :)

@leearcher6853 3 года назад

@Casey Ayaan I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff now. I see it takes quite some time so I will get back to you later with my results.

@ChiaraJ91 2 года назад

*Found this through a RU-vid video **enjoyable.fishing** recommend does exactly what its meant to do. Very durable and no hang-ups at all surprisingly*

@PaulAdamsTheHandmadeFisherman 4 года назад

thanks for making this. great to watch on new years eve

@NobleSavageOutdoors 4 года назад

Glad you enjoyed it. There will be more to come.

@marktracy2577 4 года назад

Great video. I just started making baits and this is gonna be my guide for the next one I build. Thanks!

@NobleSavageOutdoors 4 года назад

Awesome glad I could help. It's definitely rewarding. Good luck!

@ronhart8857 4 года назад

Great video on making your own fish lures. Thank you for the great information.

@NobleSavageOutdoors 4 года назад

Thanks, appreciate the support.

@RiskyMethods.81 Год назад

I saw that unevenness when you were doing the top profile😁 Great video. I do a lot of fishing in Minnesota and baits are expensive. Figure I have the tools and some time, why not make my own.

@NobleSavageOutdoors Год назад

Yeah it's tough to cut anything perfect with the bandsaw, but the belt sander can always fix it. Also, much more fulfilling to catch a fish with your own homemade bait.

@dabeast4337 3 года назад

Thanks for this video. Been making baits for a few months now and wouldn’t have started without this video

@NobleSavageOutdoors 3 года назад

Awesome, I'm glad to hear I could help get you started!

@quinnweis5187 4 года назад

Nice job. These are amazing.

@NobleSavageOutdoors 4 года назад

Thanks for the support.

@FrettholdBaits 4 года назад

Great job man. Much better than my first attempt!

@NobleSavageOutdoors 4 года назад

Thanks a lot. It ended up being the best bait on our musky trip. There will definitely be more to come.

@huntingmissouri5420 2 года назад

Cool video thanks for the info!!

@NobleSavageOutdoors 2 года назад

Thanks for the support!

@Charlie-nq2vn 3 года назад

Very nice job.

@NobleSavageOutdoors 3 года назад

Thanks!

@gabifishing642 2 года назад

Nice work well done, I subscribed to your channel

@NobleSavageOutdoors 2 года назад

Thanks I appreciate the support!

@lannyseals2084 2 года назад

This is your first bait and first paint job?!? You did great man looks good wish you luck with everything!

@NobleSavageOutdoors 2 года назад

Thanks! Yes it was the first one I ever did. I researched a lot before I even attempted one though.

@jasonbehm7216 4 года назад

Really impressive for a first bait. One tip I would suggest is removing the tape from the bill before clear coating. Again really nice work.

@NobleSavageOutdoors 4 года назад

Thanks for the tip. I agree, the tape got saturated with resin and was really tough to get off.

@mirsadmemic5863 2 года назад

Onest man. Didn't hide enithing !

@NobleSavageOutdoors 2 года назад

Thank you.

@ivanbl4001 3 года назад

Show, perfeita

@NobleSavageOutdoors 3 года назад

Thanks!

@chuckdumas1023 4 года назад

Next time do all your testing before hook hangers use some hot glue to glue your weights on the body before you drill holes for them ! That way you can move them around if needed ! Great job

@NobleSavageOutdoors 4 года назад

Sounds like great advise. I was kind of stuck once I drilled the holes. I researched where others typically put the weight, but I think I got somewhat lucky the weight and placement worked so easily.

@jondoe9077 4 года назад

Hey man when you seal the lead try and use baking soda and see how you like it. I watch a really good male maker on RU-vid and that’s what he uses. It works really well. Just wanted to give you a good idea, thanks.

@NobleSavageOutdoors 4 года назад

I've seen people use baking soda and super glue. It hardens up like a rock. Main reason I didn't was just because I didn't have any baking soda available haha.

@jondoe9077 4 года назад

Oh, lol. I tried it when I needed to fix something and it worked really well. Hopefully you can get ahold of some!

@PENFOLD1962 2 года назад

My bad! I thought that ya had made them before!!!

@NobleSavageOutdoors 2 года назад

Nope first time!

@PENFOLD1962 2 года назад

@@NobleSavageOutdoors woooooah nice one mate. Can't beat that... Did ya have a smug grin unhooking the pike... My smugness would have been off the scale lol.👍😷👍😏🤣😂🤣😂😂🤣

@NobleSavageOutdoors 2 года назад

Absolutely I was grinning from ear to ear. It actually ended up being the best lure of our trip to St Clair which is crazy.

@gewangpemburu1558 2 года назад

👍

@mikefishes6232 3 года назад

you sell any of these lures? I noticed you said lake st clair, im from that area too (macomb twp) but fish PH and marysville

@NobleSavageOutdoors 3 года назад

I'm from Pa, but we took the trip to St Clair exclusively to musky fish. I have not sold any of these lures yet, but if you are interested, you can message me on my website and I might be able to make something custom for you.

@johncuervo3019 2 года назад

How did it hold up

@NobleSavageOutdoors 2 года назад

It held up great, and worked great! Check out this video when we took it out for the first time. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xQZr4jZf2N4.html

@ronaldorodrigues6923 3 года назад

Boa noite pôde traduzir em português lhe agradeço

@NobleSavageOutdoors 3 года назад

desculpe, não tenho certeza de como

@davidwright8609 4 месяца назад

Do you have a print?

@NobleSavageOutdoors 4 месяца назад

What do you mean by a print?

@ronaldorodrigues6923 3 года назад

Traduzir em português

@teozxr400 4 года назад

If it is simple it's magic... This isn't so... But of course you made a good work

@NobleSavageOutdoors 4 года назад

Thanks. It's definitely not simple to do perfectly, but it isn't hard to get started. Once you get started, you can always improve.

@davidhefner5668 3 года назад

Lima, Ohio

@robertcornelius3514 Год назад

Nice work, but I would have thinned out the belly a bit more. Too fat for me.

@NobleSavageOutdoors Год назад

Thanks! I'll try to remember that for next time. It makes sense to keep the buoyancy up high and weight down low to have the bait stay upright and track well.

@Brownhonkey Год назад

Sanding sealer is not waterproof.. the blank will absorb some water. Linseed oil or epoxy would actually do what you think sanding sealer does

@NobleSavageOutdoors Год назад

I did say it waterproofs the wood "a little bit" which is what I meant. It is not completely waterproof, but the sanding sealer also penetrates into the wood and hardens the outside layer to make it more durable. It seals it enough to test the buoyancy without worrying about your lure soaking up water. You wouldn't accomplish the same durability with linseed oil or epoxy at this stage in the process because they do not penetrate into the wood nearly as much as sanding sealer. Some people also use super glue at this stage which does penetrate and harden the lure as well. Later the entire lure gets a clear epoxy coating to make it actually waterproof.

@Brownhonkey Год назад

@@NobleSavageOutdoors does anything happen to the paint afterwards from a little water getting in ? I'm worried a little moisture would effect the final paint job after its done

@NobleSavageOutdoors Год назад

Thel last step of the entire process is coating it in an epoxy that seals the paint in. I have been using this exact lure for 3 years now, have caught 3 or 4 musky with it, and have had no water problems with the paint or buoyancy. The only noticeable things that have happen to it are a few teeth marks in the lexan lip and in the epoxy finish, and the first hook rubs on the epoxy at the belly of the lure which made epoxy almost cloudy looking in a half moon shape. But you'll have those same things happen to most any store bought lure as well.

@Brownhonkey Год назад

@@NobleSavageOutdoors I was worried about any moisture ruining my paint after it was finished. So on my baits I actually coat them in epoxy 2 times. Sanding sealer I mainly just use so my wood doesn't absorb tons of product. I sanding seal 2 coats. Then epoxy one coat. Paint until I'm satisfied and then a final epoxy. Maybe overboard but that's why dk and river slicks can charge what they do