How To Make a Premium DIY Hitting Mat for Your Golf Simulator (CHEAP)

Подписаться 47 тыс.

Просмотров 33 тыс.

50% 1

In this video, the GolfBusters show you how to make a custom divot-simulating insert and golf-hitting mat for your home golf simulator that will last you years.
Polycarbonate (Select 3x2):
amzn.to/3HWEB7F
Hard Foam:
amzn.to/3v8StE2
Soft Foam:
amzn.to/3BZq5YP
Turf Cutter:
amzn.to/3WCzDkl
Snips:
amzn.to/3VdLF2J
LEXEL:
amzn.to/3Wzhbd3
Construction Adhesive:
amzn.to/3PK46Lf
Where we got our Turf:
ussportsturf.com/
Get the MEVO+ for the lowest possible price using code GOLFBUSTERS10 and our link:
flightscopemevo.com/collectio...
Note: If the code does not take any money off that means there is a sale going on and you are already receiving the MEVO+ at the lowest possible price. Either way, using our link and the code will guarantee you are getting the MEVO+ at the lowest possible price and it helps support us!
________________________________________________________________________
Price Breakdown of How We Built our Golf Simulator for Under $7000: • How I Built my Dream H...
Our Favorite 2-in-1 Golf/Work Shoes:
amzn.to/3VgjFfA
Time Stamps:
00:00 - Introduction
00:20 - Materials Needed
01:29 - How to Build
07:54 - Cutting Out The Floor
Some of the links above are for affiliates. I may receive a commission for you signing up for the platform.

Спорт

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@FrugalFixerSpike Год назад

I have a couple of designs. I tried the sliding mat, with a foam bumper in the slot. But experienced the same tear out issues as you showed! Got some great ideas, wish my various mats for mine, were bigger. Thanks Spike

@GolfBusters Год назад

I had a little gap with a piece of foam in between and it has worked well so far!

@GolfSimulatorsbySpike 4 месяца назад

Big tip, wash the exercise mats with dawn to remove mold release. Roughing it up makes the lexel grab even better. Later Spike On the new channel

@machekl 9 месяцев назад

Could you please tell me wich turf do you use on top? Thanks

@Lefishn 6 месяцев назад

What type turf is that cause I've been looking to get some for the floor between hitting mats and screen. Everything I find is 3-10 square foot

@scottcrouch4476 Год назад

Michigan snow golf sounds a little chilly. I'll stick to 40° or warmer. Lol

@brianfleming3424 8 месяцев назад

I used liquid nails heavy duty adhesive tonight and put some power tools on top of it . Hopefully it holds.

@ez2963 9 месяцев назад

How thick should the surrounding turf be so I match the height of the strip?

@me_seeks5695 Месяц назад

What turf did you use for dark blue/black "standing/ hitting matt"?

@benwilmarth5473 11 месяцев назад

I love it! Thank you so much for posting this. I have hit most strip options on the market today & have found any well constructed divot action strip feels the best for sure. I personally want to hit a driver off a standard tee and don't like the look at address of the tee options that simply sit on the surface (tee's above 1/2" long only). I custom cut a hole into my divot action mat so I could install a short recessed rubber capturing tee where you can insert a real tee into and so far it works great. Curious if you have messed around with that complimentary part of the hitting strip yet?

@patrickmccarthy2736 4 месяца назад

How did you cut the hole?

@zetrx1 Год назад

Great video, any idea if this can be used outdoors? Cheers 😀

@GolfBusters Год назад

The Mevo+ can the hitting strip would probably work

@paulfaulkner7765 Год назад

Is your hitting strip flush with your turf/carpet. Looks like it would sit 1/4" above if you are using the same hard foam as you have under the rest of your carpet

@GolfBusters Год назад

It is very close to flush maybe a smidge higher and yes!

@vinhgolf Год назад

Just wondering . Is it possible to build a hitting mat using the gym mat and place the turf over ? Thanks

@GolfBusters Год назад

I wouldn’t there would be no give at all and it wouldn’t be super realistic. However it could be done!

@jw2par Год назад

What was the totally cost to build?

@CA-ri5lu Год назад

Will this work with a 1/2" thick piece of hitting mat instead of turf? Or will that be too thick?

@GolfBusters Год назад

I think it could work, I would get the 3/4 soft foam and as long as the hitting mat has some dig as well I think it could be a good combo

@CA-ri5lu Год назад

@@GolfBusters Thanks, yeah, I got a budget set up with 4x5 golf mat. I was think maybe just cutting a 1x2 slot in it. Then elevate everything 1". I already ordered the 1x2 polycarbonate, so I guess I'll give it a shot. I've got elbow issues, so hoping the divot setup helps ease the impact.

@adkinsr27 Год назад

A lot of the turf sites charge a little more for a 5mm pad adhered to the bottom of the turf. Is that what you did? I’m guessing that’s the black layer on the bottom of yours but just wanted to double check with you. Thanks man

@GolfBusters Год назад

I did not! I have just the turf and then lay it over top of the inch foam interlocking tiles and carpet tape part of it down.

@adkinsr27 Год назад

@@GolfBusters niiiiice…even cheaper. I like that

@Marc89000 Год назад

Would you suggest 1" foam pads or would 1/2" be good enough?

@GolfBusters Год назад

For the wall panels or flooring?

@GolfBusters Год назад

Ohh sorry looking at the wrong thing. 1 inch for sure

@Marc89000 Год назад

Yes, I meant flooring. Thanks. Trying to find these things on Canadian Amazon.

@GolfBusters Год назад

Yea 3/4 is the lowest I would go but would highly recommend an inch

@Enrichener 2 месяца назад

I got about 6 hits out of mine before it cracked. It was only 1/2" high tho maybe thats why. Cuz the poly was .1 so i dont think it was too thin but idk

@GolfBusters 2 месяца назад

My guess is the 1/2 inch

@tjrose6845 Год назад

Any chance you can show how. To make a mat with this insert

@GolfBusters Год назад

I have a full video that covers this! Search my channel you’ll find it!

@nebaseball6 7 месяцев назад

What do you do for for a tee if you want to hit driver?

@GolfBusters 7 месяцев назад

birtees!

@nebaseball6 7 месяцев назад

@@GolfBusters thanks. Is drilling through the plastic an option for lock in tees? Or birtees the best way to go?

@golfer1553golfer Год назад

What model is your turf?

@GolfBusters Год назад

Off the top of my head ASM25 it’s like 99 cents a square foot

@neilengelbrecht2447 3 месяца назад

Do you still use this, and does it still last? Not sure if this was your latest video

@GolfBusters 3 месяца назад

I have a different now! I have a video I released after this that shows how to use it

@sinkingputts Год назад

This would create a flier

@Hamilton951 Год назад

You have to get a 10k, golf in the snow would be so funny

@GolfBusters Год назад

Gotta give the people what they want

@zacharymilos392 Год назад

Do you remember what the exact model/make of turf you got? I clicked the link but it's just their main home page.

@GolfBusters Год назад

I believe it was AM25

@intothebreak571 6 месяцев назад

How do you tee up?

@GolfBusters 6 месяцев назад

Birtees!

@GolfBusters Год назад

Get the MEVO+ for the lowest possible price using code GOLFBUSTERS10 and our link: flightscopemevo.com/collections/all?sca_ref=2830986.E8wPVjrbwy Note: If the code does not take any money off that means there is a sale going on and you are already receiving the MEVO+ at the lowest possible price. Either way, using our link and the code will guarantee you are getting the MEVO+ at the lowest possible price and it helps support us!