How to make a styrofoam RC airplane yourself | homemade low cost project

Подписаться 188 тыс.

Просмотров 375 тыс.

50% 1

This time I'm going to teach you how to make an RC airplane very easy, but you'll need some time and dedication to complete this.
⭐⭐⭐⭐⭐➡Components to make this project⬅⭐⭐⭐⭐⭐
Motor and ESC amzn.to/2rNox1h
Transmitter with receiver amzn.to/2re8k4r
Micro servos 5X amzn.to/2s5Hg5D
Battery and charger combo amzn.to/2rwrHXm
Things I used for this project (The ones above are enough, but just in case you wonder what I used)
Radio amzn.to/2qu2kBB
Receiver goo.gl/X4vkjE
Battery goo.gl/byI2NW or similar
Motor (not the same but similar) amzn.to/2retDDb
Esc amzn.to/2s5AOv7
Micro servos goo.gl/U4wvfE
⭐⭐⭐⭐⭐➡Components from banggood⬅⭐⭐⭐⭐⭐
Motor: goo.gl/RGr3EG
ESC: goo.gl/GTssCD
(Try other ESCs in case they're under restocking)
ESC 2: goo.gl/NcKK7j
ESC 3: goo.gl/rPWWze
Motor and ESC (recommended): goo.gl/MLpo4x
Radio system (recommended for beginners best price) goo.gl/Ws2b6z
3S battery: goo.gl/XYsyZQ
XT60 connector: goo.gl/BrUJLY
Microservos: goo.gl/r26w3g
Propellers: goo.gl/5TGNtd
*****************************************************************
Download the plans here: joyplanes.com/es/wp-content/u...
*****************************************************************
Musics from:
Leptir by Leisure-B
Film by happiness in aeroplanes
Which Way Is Up? by Silent Partner
The Sea Beneath Our Feet by Puddle of Infinity
Cave Fight / Lament by Jan Morgenstern
Sirius Beat - One

Спорт

Опубликовано:

9 дек 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 324

@simon-me7zg 7 лет назад

will you please tell me every part measurement

@Joyplanes 7 лет назад

Hi, I'm sorry I didn't put that in the description, the measurements are wing span: 76Cm, 14 width. Fuselage 56Cm, horizontal stabilizer: 25Cm of width, vertical stabilizer: 16Cm height. Use this measurement to have an idea but you can use different measurements really depending on the weight and other factors.

@simon-me7zg 7 лет назад

+Joyplanes thank you

@Darkiegaming 5 лет назад

Impressive. Could you please explain the principles for power calculation of component i.e. esc, servos, battery, etc

@Biscuits2 4 года назад

Rehan Ali Qureshi nerd

@NimbleHD 4 года назад

@@Darkiegaming nerdy

@drjohn3960 5 лет назад

you have to pay that broken stick dude 😂

@swisscheeseaviation590 4 года назад

When he “accidentally” snapped that stick 😂

@foamaxmore 7 лет назад

Very clear explained demo for building foamies and some great animation video. Thank you, you make me want to build a new foamie like yours...

@s6a6n6d6m6a6n 6 лет назад

Never mind the airplane, your video editing skills are phenomenal !!!

@codswallop4012 4 года назад

love it. easy to understand and you tell us everything. keep up the good work dude!

@hklim3499 4 года назад

Wow, fantastic self-made plane. Worth the effort..

@brageolai5203 7 лет назад

i am really impressed with the quality of the video, nice toutch with the animations. 10/10

@security1guy 6 лет назад

That was a sick build and hope to see more of your videos. Thanks

@masterbrain9 5 лет назад

Amazing video mahn, can't wait to try this out 😍

@SedanurKrc 5 лет назад

I literally became excited when the plane flew 😂👏🏻👏🏻

@Joyplanes 5 лет назад

Me too! haha

@vaibhavjain2791 2 года назад

Good demonstration and explanation video. The resulting plane is good and flies wonderful.

@itsabuscus1619 6 лет назад

Love the video man this is some high quality stuff! I like how you cut the wing out with the Hotwire on the table. (Fishelooge, stab-a-lisers, aleroons. Sorry, now you're gonna think of me everytime you say those three words.)

@madswarming-hansen9044 6 лет назад

Great video. I like how simple and straight you are. keep up the good work! ;)

@Joyplanes 6 лет назад

Thank you!

@bigfranchise 6 лет назад

Very beautiful! Keep up the good work

@Amindu_D 4 года назад

Well explaining and best rc plane making vdo i watch ever

@killgaming5249 6 лет назад

Best video I watch ever...

@januszpolski4228 3 года назад

Really thanks! Great film& hobby

@ytchannel2057 7 лет назад

u edited the video very well i just love the music. And the plane flew very well. Even i had made one with 1000kv motor & 2200mah battery but it did not fly. So I have kept it aside for some time

@florivaldopereirajunior5389 6 лет назад

parabéns..... o próximo projeto com certeza sairá melhor ainda!!! abraço

@MarkPrimavera 2 года назад

Great build and design!! Just a hint, for cutting ribs I will join the two wing rib material temporarily with double sided tape, then you only have to cut once :)

@GavinRemme 7 лет назад

Nice! Well done filming and editing:)

@vanhelsing3225 7 лет назад

cool... very inspiring. im building mine soon...

@johngibbs6487 3 года назад

wow has this open my eyes thanks a new world for me love it thanks john

@Joyplanes 3 года назад

Glad you enjoyed it

@MasboyRC 4 года назад

I use light aluminium tube to make wingspan frame, it's more light, rigid and stronger.

@littlecheek0695 5 лет назад

Thanks this helped a lot

@agameroughfinishers8334 6 лет назад

Best channel

@MrVipulLal 2 года назад

Very nice video. Thanks

@p90iq 4 года назад

This is amazing video

@babumohan4549 5 лет назад

stunning by your videos.impressed also subscribed.cheers from india.

@deimersuarez2493 3 года назад

Colombians here are in joy because the Harina Pan bag you got there xD Nice.

@the_46th_viper 5 лет назад

appreciate it bro

@jellezwart9155 5 лет назад

It is only low-cost when you already have all the electric components.

@idk-ir6vv 4 года назад

Obviusly you still need the electronics, but you can get electronics for like $50-$60 so not that expensive

@friendly.arsonist4851 4 года назад

@@idk-ir6vv uhh ok budddyyy

@alienbeef0421 4 года назад

@@idk-ir6vv try to multiply one dollar by 51. That's expensive for me, a Filipino

@imtoouncreative8263 3 года назад

Maru Ivan Rico minimum wage in Phillipines is higher than the equivalent of minimum wage of USA so your excuse kind of goes out the window there

@ferce889 3 года назад

@@friendly.arsonist4851 $60 easy lol. battery is $10-20, motor with esc is $20 and you can get 10 servos for $20 all on amazon

@joylavy6052 6 лет назад

A good vid!!! 💪👊

@ishansharma6262 3 года назад

Impressive video brother ⚡️👌👌

@blazewolf1859 5 лет назад

Great video! I love how you explain everything and include a parts list. I based my plane off of yours and bought the same servos you used, but my servos jitter whenever I try to move them. I made sure that the FlySky I6 transmitter and receiver are all properly calibrated, but they still jitter. I tried all five of them, but they all seem to do the same thing. Could the problem be with the servos or is it something to do with the receiver? Thanks so much.

@Playingwaslayinggirly 2 года назад

Amazing video! Is it easy to make?

@francissonu5007 6 лет назад

so cool

@bromleysmakeityourselfrc2853 6 лет назад

Well done!

@Joyplanes 6 лет назад

Thanks!

@lankoglot6015 6 лет назад

Very good video.

@alexandrpetrov1110 5 лет назад

thanks!

@basherkp3119 7 лет назад

super tutorial

@Magma_Boy 6 лет назад

Good video Keep the good work

@Joyplanes 6 лет назад

Thank you!

@t-art2780 3 года назад

Thank you 👍👍👏👏🙏🙏

@anthonybelcher8569 6 лет назад

Awesome

@lucaspeters1463 7 лет назад

Try to add all the parts you can to the main body before attaching the wings, and when attaching the wings try to get a feel of where the airplane's center of mass is and place the wings there, if your plane tends to nose dive move the heavyer parts more in the back and if it tends to go up move the heavyer parts in the front.

@Joyplanes 7 лет назад

I first make the airplane and then put the componets in place, I always leave enogh space at the nose to be able to change the CG.

@AaryamanSingh 7 лет назад

nice

@AntoAuto 6 лет назад

can i use your part measurement without ailerons (3 channel), ?

@younessmestadi1046 5 лет назад

أحسنت وبالتوفيق ان شاء الله

@angelreading5098 5 лет назад

Its a great flyer,build a twin engined model next using your same methods.

@Joyplanes 5 лет назад

I'll try to make a twin engine airplane in the future.

@subhashkumawat1980 7 лет назад

great

@daviddavids2884 6 лет назад

thanks for posting. some late thoughts for you and your subs. do not mount servos in the tail, MOUNT SERVOS NEAR THE CG. mounting servos aft of the cg makes the tail heavier and more counter-weight is then necessary, for correct balance/cg. mount aileron servos as far inboard as possible. ailerons can be controlled with one servo; see strip aileron configuration. at 1:40, the profile shown is NOT a clark-y, it is semi-symmetrical. clark-y has a flat lower surface. fortunately for you, the profile that was cut has a mostly flat lower surface. (stick with the original clark-y, not the clark-y II, which is a more complicated profile.) a poplar dowel makes a better main wing spar. the spar should extend most of the span; not just the middle one-third. at 8:12, make control horns from an old credit card or similar material, not from an aluminum can. mounting the battery as low as possible increases stability. cg appears to be pretty good. correct cg is 30 percent of main wing chord, aft of wing leading edge. cheers www.funfly.nl/Verdiepingen/Vleugelprofiel/Clark%20Y/Clark%20Y.jpg

@Joyplanes 6 лет назад

Hi, thanks for your comments about this project. I'll be making more airplanes and similar projects soon.

@hard34disk 5 лет назад

nice video bro tnx XD

@Joyplanes 5 лет назад

Thank you!

@samfisher2663 7 лет назад

gold working i l'île allo mor the réalisation of the video

@theprogamerabhishektripath7593 6 лет назад

sir, your video is really amazing and I want to ask that from where do you got the remote controller , servos ,and the transmitter and receiver also how did that fan and what is the range of your radio controller?? did you made the fan or you purchased?? pls pls sir don't forget to answer my questions coz I am also making that plane and I want to show it to my frnds , teachers and off course in my school. pls pls sir answer my questions. again I want to tell you that your video and your plane is really amazing.....

@grumyoseph 4 года назад

Thank you. very helpful !

@RCaeroDepron 2 года назад

sympa tes vidéos j ai moi aussi une chaine de construction d avion en Depron que je viens de lancer j adore aéromodélisme

@bhaveshshinde8021 3 года назад

Hey can you please share your findings for crash , initially when you took for fly..what all changes you made ??

@fisayobanjoko5498 5 лет назад

Great video, I would like to build one. Can you please put up the code?

@jabirridwan 2 года назад

instead of using landing gears you can just put on some of those things that seaplanes use to land on water so that the plane can be amphibious

@Joyplanes 4 года назад

New version of this video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kc9_teCL6SE.html

@SherazManzoorOfficial 5 лет назад

What kind of adjustments you make when test flight fails?

@yeurckrc734 6 лет назад

wow goot

@mohandass7278 6 лет назад

Super i succeded to make that😊😙

@diggydice9041 5 лет назад

This is the 2nd video like this I've seen & both show ways of handling materials that will make this project easier. I can figure out how large to make the wingspan and the overall length of the plane w/ common sense but I'm more concerned with not knowing anything about the controller or electronics needed? Like the radio used I'd want to buy a better one I could grow into since I'm sure this is an addictive hobby? Lol, I'm sure it's addictive because I already feel it just watching you make this one. Is there a kit to give us all we need or do you have the list? any help would be great... peace

@Joyplanes 5 лет назад

I will make a more descriptive video or series of videos explaining all.

@diggydice9041 5 лет назад

@@Joyplanes ~ I'm like, "Stoked" over all of this! I've learned how to engineer a main body that's hollow yet super strong. Also how to bury the servo's within the structure of the plane. And how to paint it too. All in a few days. I'll watch your stuff when you're ready.....

@matthewarchibald5118 5 лет назад

This is awesome, thanks for the video, you make it look very approachable. a couple questions does it matter what foam I get? and what was that special tape for airplanes you mentioned? do you have links for the stuff you suggest? thanks!

@Joyplanes 5 лет назад

Hi, you can use almost any kind of foam, the tape is just packing tape but with colours, but you can use any plastic tape. Search hobbyking for it.

@matthewarchibald5118 5 лет назад

@@Joyplanes thanks a bunch!

@vijayganesh9072 2 года назад

Hey hi I am a huge fan of your video I have some doubts Why does my lipo battery (lemon 2200mah,11.1volt,3s,30c) spark continuously while i try to connect to my esc (30a (deans connecter)) Maybe is it because of friction I am actually making a plane And I am using the battery mentioned above and the 30a esc and 2 servos and a 2200kv brushless motor And do u have any idea of the total flight time

@overrekt9695 6 лет назад

well....i am building my first rc air plane thanks to you.:) hope it works i will replay this comment if it works XD.

@overrekt9695 6 лет назад

hey, i got a question... what glue did you use to stick the motor the fuselage? btw i am allmost done at building :)

@fpvstuff5891 4 года назад

Now get an all in one FPV Cam in it and Use it as spy plane Or runcam split Mini with cool footage !!!

@jacobsingh4873 7 лет назад

How did you make that 3D animation of the plane assembly?

@Joyplanes 7 лет назад

3D software that I use at work

@savyata7218 4 года назад

@@Joyplanes which software

@djisharaf7978 Год назад

My guy break the piece of wood and he pretends nothing happened I like that 😎 haha 😙 🎵🎵

@Paulo-zj9jm 6 лет назад

very very nice!! what radio did you use for this project? i was trying to see in the video, but didn´t find it

@Joyplanes 6 лет назад

Thanks. I used a taranis X9d plus from frsky but a flysky also works and is cheaper.

@emrahinan1 5 лет назад

The plane has been beautiful, You have to pay that bastard's rent.

@haririalaa6487 7 лет назад

Nice Video and work..! What video software you are using and what camera ?

@Joyplanes 7 лет назад

Thanks, I'm a filmaker and I do that for a living, I use a canon DSLR but any similar camera will do the same, and I use premiere pro for editing and other adobe software.

@haririalaa6487 7 лет назад

I see, thanks for your information..! Happy Flying..!

@BoomLikeTravel 7 лет назад

I need help i never built rc airplanes nor anything about it i will not blink someone with wings i have no idea how to get it

@USBEN. 6 лет назад

Amazing video . I want to know how long can it fly with that battery pack full charged ?

@Joyplanes 6 лет назад

Thanks! The battery will last about 10 min, other more efficient configurations can last longer.

@USBEN. 6 лет назад

Oh i see 10 min is decent , thankyou for replying .

@OualidMars 2 года назад

Thanks for downold air plant

@owenball3691 6 лет назад

How do you make the servos for the wings connect to the same channel but make them move in opposite directions? Would it be better to just use one servo in the center or is it better to have two servos?

@Joyplanes 6 лет назад

You can use either technique but be having two servos save a bit of hassle aligning them later, and with two servos you can make a mix to make them behave like flaps for landings, it can be programmed in a mix in the radio.

@AhmdAhmd-bc5gp 6 лет назад

Great video , Can I use brushless motor 1000kv ?? and plz could u tell me what the measurements of this plane ? Thanks

@Joyplanes 6 лет назад

There is plans in the description, the measurements are in millimeters. And yes you can use a 1000KV motor but is better a smaller motor fitting a 4 or 5" propeller. The motor should be about 2300KV a 1000KV is made for bigger propellers and it's hevier

@lastrebel0501 4 года назад

Bucheron !!!

@murugurthy 3 года назад

It would be better to put servos under the wing,u get better lift

@diggydice9041 5 лет назад

This ought to inspire those on limited budgets to know they can do this for a fraction of the cost? I'm building a wing but my problem is which Transmitter is best? As in a User Friendly, easy to program radio? any ideas? peace

@Joyplanes 5 лет назад

I think all radios have tricks on their interface, but I would recommend any open TX based radio like the Frsky, the new jumper T16, etc. Futaba has also a good user interface, but they are a lot pricier.

@finleygaming7957 7 лет назад

I love your channel, what is the glider montage music?

@JoyplanesRC1 7 лет назад

is from the youtube library, called Far away

@finleygaming7957 7 лет назад

Thanks, I really like that type of music!

@agetaviano6046 5 лет назад

Hey, would you mind explaining how you did the electronics for the aileron, im talking about the "channels" thingy for the remote control as there are two servos and they both have to work together at the same time but in opposite direction

@Joyplanes 5 лет назад

Look at the videos the channel flitetest have, they explain everything about that.

@agetaviano6046 5 лет назад

@@Joyplanes thanks :)

@siralfredo 5 лет назад

0:45 let me just put this back...

@ohividy2093 6 лет назад

hi when you cover the wing with tape can you use duct tape?

@neutrno 7 лет назад

There are more simpler ways to build RC airplane, without airfoil, but this is also OK for beginners to understand how everything works.

@owenmailhammer8547 Год назад

kann i use any esc i want or do i need a certain one

@murtadanor9066 5 лет назад

from where you get electronic part and controller

@MFR-zk4zc 7 лет назад

Great tutorial, dude.. Btw, what is that music @12:31?

@Joyplanes 7 лет назад

Now in the description, that one is called Sirius Beat - One

@peacecord2744 6 лет назад

How long did this take to build?

@NHolovnia 7 лет назад

Great music.

@Joyplanes 7 лет назад

Yes, is not my creation, I put the credits there.

@electromaniac03 7 лет назад

Joyplanes why does my profile picture look so mutch like yours? :P

@JoyplanesRC1 7 лет назад

True! hahaha that's crazy.

@finleygaming7957 7 лет назад

can you tell me the glider montage thing at the end plz?

@gaba2130 7 лет назад

Finley Gaming

@annamalaia8589 6 лет назад

Could make a video on its software part.please

@fangio2902 3 года назад

Can you help with Radio Control Programming?

@felicrack416 Год назад

Hola.mempodria ayudar.soy muy bueno en aeromodelismo.tengo un planeador que pesa unos 500 GRS.quisiera un motor para impulsarlo determinados segundo y después que vuele solo sin controles.estilo vuelo libre.si tu puedes ayudarme? Desde ya muchas gracias

@Xenon-ui1jk 5 лет назад

Los de joyplanes 1estan en todas partes😸😸😸✈️🛫🛬🛩

@tomaszfrankowski6549 7 лет назад

Hi What motor ,esc and battery did You use? Nice plane

@Joyplanes 7 лет назад

Hi, I used this: Turnigy Nano-Tech 950mah 2S 25~50C Lipo Pack, 18-11 2000kv Micro Brushless Outrunner, HobbyKing 10A ESC 1A UBEC

@vanhelsing3225 7 лет назад

Tomasz Frankowski final year project?

@airplanegeorge 6 лет назад

what brand name are the motor and esc? and where did you get them?

@Joyplanes 6 лет назад

I got them at hobbyking.com it doesn't have to be the exact same combination of motor and esc. try a drone motor with a 30A esc.

@lukhmanmali3964 6 лет назад

Can i use a turnigy 1400kv motors ? Is there any speciality for the motor that you use in the video than from using a motor for quadcopter?

@Joyplanes 6 лет назад

You can use it, the motor I was using was small, light but not powerful, that motor you want to use might be a bit heavier but make the wings a bit larger and that should be all right.

@Joyplanes 6 лет назад

Hi! well, you can contact me on facebook as joyplanes rc, (it's in Spanish because of my main youtube channel) but I'll try and answer your questions.

@jacobsingh4873 7 лет назад

What wire do you use for the servo pushrod? oh, and a question that is off topic that I want to ask is that what video editor do you use? thanks!

@Joyplanes 7 лет назад

The pushrod is a metal guitar string, you can also use an aluminum wire. I use Adobe for my work, I'm a filmmaker so I have access to this.

@jacobsingh4873 7 лет назад

how many mm in thickness should the wire be?

@Joyplanes 7 лет назад

depents on the stifness of the wire, if it is stiff enough then you don't need it to thick.

@neutrno 7 лет назад

I use wire from old umbrella, it is quite good push rod for almost any RC airplane.

@Joyplanes 7 лет назад

Good idea!