RC Electronics for Noobs

Подписаться 121 тыс.

Просмотров 1,8 млн

50% 1

one easy way to make an airplane: • $5 Trainer Build Techn...
Ed's folded foam board "armin Wing": • Easy Foamboard Wing Ai...
How to solder stuff • Flite Test - Soldering...
how to choose power system • RC Plane Power Systems
Info about motors • RC BASICS: brushless ...
Info about ESC • What's inside: ESCs
Info about Battery • Lipo Batteries Explained
Info about Servos • Maker Hangar: Episode ...
Info about Radios • Maker Hangar: Episode ...
SAMM'S RECOMMENDED BASIC SETUP:
Radio System:
- FlySky i6 - Feature packed budget starter: amzn.to/2jpjLAk
-FrySky - My all time favorite: amzn.to/2iTa7ax
- 8Channel Rx: amzn.to/2iKWQxj
- Small SBus Rx for race quads etc: amzn.to/2iKWQxj
- 5 Basic 9g Servos: amzn.to/2jAIRhZ
- Super Cheap 30a/1000kv ESC/MOTOR: amzn.to/2jARbOP
- 10x4.7 Propeller: amzn.to/2iKYYFu
- 2200 3s Battery: amzn.to/2k5sDyg
SOLDERING STUFF!
Simple and cheap but probably not crap: amzn.to/2iKX5J2
Mid Range Weller Station: amzn.to/2iKZiE4
My Favorite Hakko High End Station: amzn.to/2jppFBo
60/40 Rosin Core Solder: amzn.to/2iKZiE4
(I do not reccomend lead free solder)
Extra Tube of Rosin is always nice: amzn.to/2k5vZRR
Desoldering Braid is good to have around: amzn.to/2jANdp3
Helping hands are also wonderful: amzn.to/2k5ucw8
To see what I'm up to as it happens, follow me on / sammsheperd
If you feel like it supporting:
www.patreon.com/samm_sheperd?... for monthly support
/ nessfultude22 has fan funding enabled on the right side of the page
Paypal email: sammshep@gmail.com

Наука

Опубликовано:

15 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@FliteTest 8 лет назад

Great video Samm

@SammSheperd 8 лет назад

Thanks very much! Love your work

@classicalmusicanalysis 8 лет назад

I'm very thankful to both of you for having introduced me to this incredible world of RC airplanes! Keep up the good work and please continue spreading this hobby!!!

@howtomakercplanetecnologis655 8 лет назад

+Samm Sheperd (SNRS) Sam bro I am one of the child in these projects I am 11years old but I want to make my first rc plane

@ashminab.m4490 6 лет назад

FliteTest girlfriend Aslam@technauto.com

@joeladjoumani4352 6 лет назад

FliteTest

@gulp630 5 лет назад

Rip Samm, I'll always remember your influence and inspiration you gave me to pursue the rc hobby

@vernonkaceygala7820 5 лет назад

Wiat what happened?

@falconface2239 4 года назад

Did he die?

@jacobr7729 4 года назад

@@falconface2239 Sadly, yes

@falconface2239 4 года назад

@@jacobr7729 How?

@jacobr7729 4 года назад

@@falconface2239 watch the last video

@MCsCreations 5 лет назад

Dude, this video helped me so much... 😔 RIP Samm...

@dkblaze9072 5 лет назад

He's dead?

@kevinrdunnphs 5 лет назад

@@dkblaze9072 Unfortunately so.

@eyss6303 5 лет назад

@@dkblaze9072 check the last video on this channel

@dkblaze9072 5 лет назад

Such a big loss. This guy was good.

@PinkeySuavo 5 лет назад

Holy, I got so sad not even knowing this dude, but I think I saw this video like a year ago... :(

@spencerjohnson662 5 лет назад

Just discovered Samm's videos. I am high school teacher and am diving into the RC world myself. I am hoping to learn enough so I can teach an elective class called "wheels and wings". I hope that Samm's family knows his son's knowledge and ability to simplify and share that is still living on. Samm's videos are better than everything else I am finding out there. Thanks much to Samm and mom and dad for raising such a good son. I will be using some of his videos on RC planes to share with my students. I appreciate how the family's faith in God has given them hope and peace. Keep the faith!

@lucywucyyy 4 года назад

rip sam :( i keep coming across his videos while trying to look for rc related stuff and getting sad as im reminded of him, at least he left a great legacy behind tho, still entertaining and helping people years after hes gone, more than i could ever wish for lol

@jenerik_guy2474 5 лет назад

Probably one of samm's best videos. So sad we'll never have any more :'(

@rightistfreedom8691 5 лет назад

What happened to him?

@jenerik_guy2474 5 лет назад

@@rightistfreedom8691 Look at his latest videos my friend

@scar2871 5 лет назад

Rightist Freedom he died :(

@Captainziadkhan 4 года назад

Ooh !!may God bless his soul

@lukecrews6346 4 года назад

Server

@AndrewNewton 8 лет назад

Excellent tutorial for beginners. I was in the process of doing one for a friend but I'll just direct him here.

@mrsouthcentral42021 16 дней назад

I want to cry. No one explains anything on bodes they just do stuff. Thank you for explaining

@timothyfeitser4920 2 года назад

Thanks to this man I was introduced to rc airplanes, fpv drones and all other forms of flying rc. Rest in peace you will be missed

@SammSheperd 8 лет назад

Also, do you think I should do a review on that mini quad at the end of the video?

@SammSheperd 8 лет назад

Oh okay...

@SammSheperd 8 лет назад

Used this motor www.headsuphobby.com/HURC-300-Blue-Wonder-1400kv-Brushless-Motor-G-272.htm and an 18A ESC, 9g servos and this same radio system all used in this video

@williwonti 8 лет назад

+Samm Sheperd (SNRS) The CX10 has been out a while now. It's a great learning quad. I just wish they would have a cheap one with 3 axis (acro) on it to learn with.

@joeya5438 8 лет назад

+Samm Sheperd (SNRS) I would like to know how you did that flip.

@SammSheperd 8 лет назад

Rum Ham By pressing down on the right stick, you enter flip mode. The transmitter will beep and you can push it forward, back, left or right and it will flip that direction by itself. You can also cut the throttle mid flip to force it to flip multiple times, though recovery is not guaranteed.

@Swampy_Hag Год назад

I just flew my homemade rc airplane for the first time yesterday. It took me countless times, so much so that people laughed at me, but I did it. Thank you for all your detailed explanations and projects, you haven't only inspired me, but countless others. Thank you.

@vidskitkid 7 лет назад

Love building mechanical stuff and have been doing it for years but never did much with electronic. This was so very clear, understandable and helpful Samm. Thank you!

@DevinGamingYT 2 года назад

10/10. I was really lost, and when I saw this it helped me understand RC very well. I've never really seen this channel, but from this video, I can tell it must've been great. R.I.P. Samm.. 😔

@suno958 6 лет назад

When I was young I always wanted to know how a RC plane works, now I understand...(a bit) Thanks for making this awesome video dude.

@Swkoll 8 лет назад

Your videos inspired me to get into RC electronics, thank you!

@GurjeetSingh-bm6us 5 лет назад

Cant thank you enough ever for gettting me into this hobby. after watching your videos i built my first flying wing. Still cant believe you are gone. i never met you. RIP

@RMTStudios 5 лет назад

Rest In Peace, Samm!

@user-rg6qw2mi1d 5 лет назад

gosh

@kabeerx504 4 года назад

@philippe cote 😭😭 he was my inspiration

@bencrawshaw1227 3 года назад

Has this dude passed away. Aw man there's no justice. RIP

@amessman 6 лет назад

this is ONE HELL of a lot more simple than I thought! Thanks!

@johnsyvertsen6944 6 лет назад

Adam Messmann same here it look so easy. The tough part is probably the engineering of the machine

@asianshaft 4 года назад

Do you know how to read parts stats know which motors and ESCs wok best with each other seriously I need help.

@ChirpFPV 3 года назад

@@beachchicken wtf man, 60$ is a steal

@jackofclubs8791 9 дней назад

This made everything so much more approachable thanks

@sheltonharlow 3 года назад

Taught me more in 5 minutes than all the "Techy" vids I've watched. Kudos and thanks!

@theflamecoreguy7929 2 года назад

Missing you rip 😟

@CrownTown10 4 года назад

Very nice presentation. I’ll be looking for more! I’m a recently retired automation engineer and have been accustomed to good product and systems documentation. I am not seeing anything like that in this field, so good videos are especially appreciated. Thanks!

@sciencepod4887 5 лет назад

this is by far the best video I've watched all week. thank you so much

@sailor0500 6 лет назад

The most concise explanation of r/c setup I have seen. 5 stars.

@kyde9921 5 лет назад

Thanks for helping me get into this hobby. RIP Samm

@underscore_x5 5 лет назад

One of your best videos! RIP Samm...

@evansymonds5400 6 лет назад

EXACTLY the video that I, and probably lots of others, need! Great job!

@wouldntchuliketoknow8170 7 месяцев назад

I like the way you thoughtfully laid out the com0onents in the beginning.

@joeya5438 8 лет назад

This is perfect! I have been wanting to start scratch building rc planes for a while but have been a bit confused about the electronics. This answered many of my questions. Thanks a lot!

@SammSheperd 8 лет назад

Awesome! There are always more question. RC groups and RU-vid will usually have an answer, but if you have a specific question, ask me!

@joeya5438 8 лет назад

***** The only other question I have right now is about LiPo batteries. It is my understanding that they should not be discharged past a certain point. How am I supposed to know when they reach that point to ensure I don't damage them? Do I need to get a multimeter to check them?

@SammSheperd 8 лет назад

Rum Ham Great question, LiPo batteries are annoying because they won't let you know when they are dead. Once they discharge past 80% of their capacity, or about 3.0v-3.2v per cell, they start to damage themselves. But since most ESC's come with a low voltage cutoff feature these days, it's not quite as important. But a good tool I use is this one www.ebay.com/itm/NEW-RC-Lipo-Battery-Low-Voltage-Alarm-1S-8S-Buzzer-Indicator-Checker-Tester-LED-/271746517929?hash=item3f455acba9:g:MzYAAOSwYGFUvRrP It plugs into the balance plug and tells you all the voltages, and you can set at which voltage to trigger the alarm, it is VERY loud for such a small thing. If you wanna be extra nice to your batteries, set it to like 3.4v, or you could push them down to 3.0v if you really want, just don't leave them there for too long.

@joeya5438 8 лет назад

***** Thanks a lot!

@Grayk-ge5vo 6 лет назад

Joey A me too I want to scratch build q plane too

@terriblegoatman826 4 года назад

Thank you so much, before this I had absolutely no idea how connecting all the servos and motors would work, but now it is all very clear and I plan on making my first plane soon :D

@Loganisbad Год назад

So it’s been two years so I assume you’ve done it, HOW THE HELL DO I TURN THE DAMNED THING OFF? WHERE IS THE POWER BUTTON?

@opiwaran354 5 месяцев назад

Holy sghit, where has this video been all my life? This is exactly what I have been looking for, a great breakdown of the required components and what they do / how they fit together. Thanks a lot!

@trooperg1234 2 года назад

Great video. Simple, and straight to the point.

@Ga2be 8 лет назад

Great and simple explanation, love it!

@SammSheperd 8 лет назад

+Ga2be Thanks! I think you had a little glitch or something, check out my spam box! imgur.com/R1Z6uPE

@Ga2be 8 лет назад

+Samm Sheperd (SNRS) Holy... It just told me some error occurred, so I spammed the button a little. Sorry!

@SammSheperd 8 лет назад

***** RU-vid is pretty good at filtering suspicious comments

@Ga2be 8 лет назад

+Samm Sheperd (SNRS) Great for me I guess! I also have a question, are you able to change the channel which your control works at? I've heard about "crystals" but I'm not sure :S

@SammSheperd 8 лет назад

***** Currently, 2.4GHz is what everyone is using. With 2.4 GHz, the Tx and Rx are connected digitally and don't need crystals. Before 2.4GHz, it was 72MHz, with that system people would have to use a matching crystal in the Tx and the Rx. there were only a certain number of different crystals so people had to make sure two people weren't using the same crystals. These crystals were named a channel. What the crystal actually does is tune the radio into a specific sub frequency. like 72.790MHz. 72MHz was also kinda glitchy, required 8 AAA's and had really long antennas. So the new 2.4GHZ is pretty great.

@JOeSJNrForReal 7 лет назад

THANK YOU VERY MUCH!!! Where was this video when I started out around around 2 years ago? :)

@kschaub62 3 года назад

Just came across this video as I was at a loss for how to finish my project. Thank you for such a simple but information filled video. Rest in peace Samm

@stanralph9738 6 лет назад

OUTSTANDING video because of it's precise simplicity. More please Samm.

@oscardiaz718 4 года назад

I am really into building my own aircraft and Samm has inspired me a lot. RIP

@kaydostandssideways8946 Год назад

rest in peace my friend

@givcloutpls8712 2 года назад

I like how it just gets right to the point and doesn’t go into anything else that people who want to start in rc don’t really need to know if they aren’t studying for a test.

@dannydeko331 6 лет назад

All I can say is Wow! Best video by far on how this stuff works

@SongLok 7 лет назад

thank you so much, this vdo help me a lot

@sancrosanct5070 3 года назад

BRUHHHHH EVEN YEARS LATER.... THIS GUY IS STILL TEACHING US...POGCHAMP MY MAN

@outcasttheumbreon8408 5 лет назад

Finally, someone who explains it with ease you are a big help

@mchaelboze7976 11 месяцев назад

FINALLY!!! THANK YOU!!! It's amazing how overwhelming RC aircraft can be to someone without an electronics background. Manuals often make assumptions that you have a working knowledge of this stuff. Not always so. You have given me a starting point. I appreciate it! Now I can get to the model-making part! 👍👍👍

@rishikunhraman1036 10 месяцев назад

He died

@Vizzix 9 месяцев назад

He died

@slyfer5321 5 лет назад

I turned the notification bell on only to find out he'll never gonna come back. Rip samm :((

@snailwzwz 7 лет назад

super educational

@sambo-g9871 5 лет назад

I've been trying to figure out how all these parts fit together and you've got it all in one succinct video, A++++

@stephenrobinson1412 8 лет назад

Thanks for this Samm, incredibly clear and very helpful!

@oogityboogity6644 2 года назад

Sams still teaching people

@OlliGarch 7 лет назад

What is the best racing quad for beginners on a budget. I need the whole fpv setup goggles controller and quad and should I start with a whoop and if so which. There are so many options I'm at a loss because I don't have a big budget all at one time but I need all the stuff any help is appreciated. Thanks for the vids they are a help. Should I get one an all in one like the eashine 130? Or the assasin 180 which has the quad controller and goggles?

@octii7147 5 лет назад

Search up "99 drone" it goes 89MPH

@TheZeroChemical 8 лет назад

Thank you so much for doing this video! I am a complete noob when it comes to this stuff, but ever since I was a kid, I always wanted to build an RC plane from hand. I would really appreciate it if you do more videos like this!

@robh5879 10 месяцев назад

The most useful video i have found by far on these components! I am 15 and want to build my own rc plane in the holidays with my friends so this is a great help.

@untrust2033 6 лет назад

WHAT CHARGER DO I NEED FOR THE 2200 3S LIPO HELP

@Ecnh2 5 лет назад

I think this should work: www.amazon.com/Turnigy-Compact-Lipo-Charger-100-240v/dp/B00XU4ZR06

@aviko9560 5 лет назад

@@Ecnh2 Buy an Imax charger

@kinghhhh1 7 лет назад

how to make rc control circuit board

@saeedms2934 7 лет назад

hany salim same requesting

@ManofCulture 6 лет назад

Possible with huge electronics knowledge.

@andrewwong200 6 лет назад

I'm assuming you'd wire transistors into the receiver to act at RC switches and control thr circuit that way

@soubhik3001 2 года назад

Awesome video, just what I needed in just 5 mins

@supercheekykiwi 2 года назад

This is the best explanation I have come across

@BobMyrul 5 лет назад

Rip man...

@isabellebeaumont1244 5 лет назад

tu est traie bon

@ohmbettafish323 5 лет назад

I always thought RC stood for "Remote Control"

@randomnickify 5 лет назад

and you are correct, because you can remote control model without using actual radio waves :)

@einflinkeswiesel2695 4 года назад

@@randomnickify I always thought RC stood for RaCing... yes I am dumb 😂😂😂

@jaypo7 8 месяцев назад

Great video mate! Everything I needed to know to get started on my project. 7 years on and still going strong :)

@Bevzthejcs 5 лет назад

Brilliantly simple. Thank you!! Just what i needed!

@B33Ys 8 лет назад

Your clear speech is the best on youtube. I haven't seen such a clear instructional video in a while and your making me want to spend money I don't have:') Good job, please make more videos!

@gunnerman1880 2 года назад

Great basics videos well explained and easier to understand better than any other I've watched.

@rashadsmith3435 5 лет назад

Awesome video! I bought a cheap drone at a thrift store for 2.00. It took me a few days to learn how to fly it. Now I'm planning to build a decent one. Your video has helped me big time. Awesome job. Thank you!

@888ian2 7 лет назад

Dude, you have the greatest youtube channel I have seen quality wise, at least for your budget (not saying it's low or anything). As soon as I finish high school this year I'll start trying stuff

@TheStandardstory 3 года назад

Aw man, just seeing the comments about RIP. This is the first video I’ve ever seen on this channel. Very informative and to the point.

@MotorScotti 3 года назад

Thank you, that's very straight forward and well explained.

@YoungInnovatorsChannel 3 года назад

This gave me so much knowledge! Awsome video

@andi480 Год назад

Just trying to get into rc airplanes and that helps a lot clearing up things. Thank you!

@Abyss9099 7 лет назад

Thanks so much for making this video! I'm currently building a 250 FPV quad and just got a Tactic Ttx650 radio with the same exact receiver you use in this video. Up until watching this video, I was confused as to whether or not I had to use a separate battery just to power the Rx. Your video cleared this up for me!Knowing that my ESC's have a BEC and that I can power everything including my Rx with just one battery is a huge relief! I searched high and low for any videos that featured the Tactic receiver and how I'd go about having to power it and luckily your video popped up in my feed. Thanks so much! 😃

@SammSheperd 7 лет назад

+Iwillsayyes1 glad it helped. I plan to make a similar video on the subject of "quadcopter parts for noobs" and "FPV for nubes" but for now I have to tell you that the ESCs used for quadcopter a nowadays don't have BECs because it's a bit silly to have 4 of them. Instead they put a BEC (or 5v output) usually on the PDB (power distribution board). I love my tactic, but as far as I know they don't have any receivers with PPM or serial output (one wire for all channels), meaning you'll have to use PWM (one wire for each channel) which is fine.

@scootersdenver 7 лет назад

Very clear and to the point. Great tutorial video! Thanks!

@NoName-ik2du Месяц назад

Excellent presentation. I'm looking into swapping out the brains of an old Roomba to make it RC controlled, and this was a great jumping off point to help my basic understand and point me in the right direction.

@vahagnmelikyan2906 3 года назад

Thanks a lot. I've been searching a video like this. Very straightforward.

@mikerozman 7 лет назад

Great overview! You really know how to condense down a lot of information. Thanks!

@anthegg7596 7 лет назад

RC 101! Very informative and simply put. I look forward to future videos.

@irishduck5854 2 года назад

I’m working on my first build and this explained a lot. Thanks bro

@konarider101 8 лет назад

This is awesome .it will be a ton of help for when I eventually try to build an Rc plane

@arshdeepkumar Год назад

Great guide Samm So simple yet you won't on internet watched a lot of videos before, yet coudn't figure out what an ESC is and how everything works

@APyromaniac 2 года назад

This really helped me find what I needed

@ptaharawn1521 7 лет назад

just started getting into flying and getting more enthused your vids are easy too understand great break down look forward too learning more. keep up the good work.....fly true....

@rcmodeltest390 8 лет назад

Your videos are awesome! Your projects are just simply amazing, and fun to watch! Keep up the good work! Hope to see more upcoming projects of yours.

@krunocanada 7 лет назад

so good simple clear and fast description thank you

@nathonhamilton4524 3 года назад

nice to hear something which is explained simply and down to earth.....many thanks.

@seanbalaun8963 8 лет назад

Great job on this Samm. Nicely done!

@FFND16N 6 лет назад

Thanks for your efforts & plain tutorials!

@nidhiwadhwa7884 4 года назад

Thankyou so much for giving the knowledge about the esc and all I was so confused about that. APPRECIAT IT

@brousmkh1376 3 года назад

👇👏 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9mn2ZOzZioA.html

@GaiusGarage 3 года назад

Super helpful and informative! Looking forward to more videos from Samm!!

@oliviercoolen6238 3 года назад

he died

@richard_darwin 6 лет назад

You explain it very simply. Thank you

@vernscheck2658 5 лет назад

Thank you so much. Not sure when I will get to the RC point, but that was a tremendous help.

@xpoz9634 3 года назад

This is what I am searching for more than 5-6 years which when I was 9 and now 14 years.youre very helpful thanks sooo much you solved all of my problems about this remote controlling from a car to a drone and even anything higher

@danieltaylor9535 5 лет назад

I have been looking for a video like this for so long

@ZenoFromTheElea 7 лет назад

Excellent video for newbies, thank you.

@nabajitdebbarma3965 3 года назад

Wow! This video helped me a lot but when I come to the comment section I came to know that this Samm is no more. Rest In Heaven

@a.ward02 4 года назад

this was actually really helpful, thanks! :)

@joey2670 5 лет назад

this is really badass cant wait to start messing with these

@rolandogonzalez8670 6 лет назад

Really awesome vid - I'm always looking for noob guides

@CollinCF3 6 лет назад

Thank you sooooo much. I have recently fallen in love with DIY RC planes that FliteTest makes, so I wanted to try it. I hopped onto amazon, and being a computer guy, I thought, "How hard can it be?" Very, apparently. All the other RU-vid videos covering this are vague and aimed at mid-level creators. Your view taught me what I need to know to make RC planes.

@godsownlunatics9650 5 лет назад

thank you a lot. you're awesome i was lost for a bit this video helped

@team_project_23 6 лет назад

great video, im new to this stuff as I recently decided to make an ant-weight battle bot but during the design stage I realized I had no clue how all the electronics went together but this has cleared it up nicely, once again great video thanks.