How to make a Thunder Creak fuel trailer even better, watch and see & completely random shop project 

Linnie and Squiggy at it again better than Abott and Costello ...

I love the shop days. You two put a smile on my face everytime.

I still close my eyes when Aaron says “Eyeballs”.

A wet day in the shop is the best Mike it's obvious you enjoy winding Aaron up and he is funny you clearly work well together ,thanks for the laughs mate much appreciated Kym Adelaide

It`s been one of those days boys, thanks for cheering me up....again.👍👍👍👍

Dirt , i was blessed to work with a Aaron for nearly 30 years. Was never a argument that didnt turn into a laugh fest and reminisce time. I know you show it, but make sure you tell him regularly , just a simple i appreciate you. Those guys are once in a lifetime . The end of every work week i would tell him "Boomer Sooner" he always said "damn right" .I didn't even like OU , LOL One week it ended up being the last time i said it to him, no regrets he was a class act.

If you’re having fun at your job…you’ll never have to work a day in your life! You guys rock the shop! Thanks for sharing DP!

I can't believe two guys can have so much fun and get so much work done at the same time. Love it! Keep on smiling.

That trailer is awesome. Glad you decided to add the work lights, great decision. But I agree, not sure how often you’ll use it. I’m also glad Arron finally got his clay pipe picking jig he’s been dreaming about. That should work great and his welds are beautifully done. Nice shop project.

Love these shop videos...... funniest stuff on RU-vid

Tell Aaron to get one of those school convex school bus mirrors. That’s actually a good idea.

saw horses sounds like a good Gunner project

Your shenanigans with the oxy cutting reminded me of a saying Matt over at Diesel Creek sometimes uses "a grinder and paint can make me a welder I ain't".

Great job welding Aaron

I've missed you two guys working together here's such a laugh keep it up

Read the instructions because it might tell you how long the battery works

shop days video's are the best but I think we need to see the bloopers of all the shop day vids.

Dirt Perfect would not be perfect w/o Arron being involved in so many aspects of the channel.. His friendship is priceless.

The lights were a great addition! Love the engineering! I give a 100 on the entertainment!! ❤❤❤. Loved the video.

Great job installing the lights guys

You two just make me grin. Thanks for the enjoyment!

When we made these years ago (back in the 80s) I would set the two ends tapered an inch or so together, figuring under load it's going to open up, and I'd rather it flex and hold the pipe flat, than flex and the pipe slide off

Big smile on my face .. lov shop projects!! Cheers! U guys Rock!!;-)!!!

I really needed that Comedy Hour's entertainment!! You two are a hoot!!

Well i guess Aaron welding on something always make it better, great job!

The will it work video will be the best. Listening to who's idea it was to make whatever, however was best.

Thank you and have a great week.

Morning DP and Aaron

You two remind me so much of my brother n law and myself. He passed last year and watching yall banter is very comforting! Keep making me smile!!

Seen a video recent. You can now get crok lights. Perfect for when you need to see where your feet are.

DP Fabrications, at it again.

I love the hilarity of you two in the shop! The one time that I always think of is the dot punch when you were doing the smoke stacks, you two couldn’t stop laughing and neither could I !! Jerry....UK

Lil Man stackin dimes!

Aaron Running Dimes And Slag...lookin good Boys

2:31 Those white packing foam squares makes great knee pad material. Just lay a strip of it along the floor when installing trim or whatever.

Mike, Chris (Letsdig18) needs one of those for his Thunder Creek, he just bought his and he likes it already! Y’all have had yours for a while now! It seems to have been a wonderful addition to your operation, sure saves money and time for being mobile and can go to whatever job you have going! By the way I love watching y’all fabricate different things in your shop! That’s going to be cool brother, y’all definitely needed that addition to the thunder creek trailer! Looks great Mike and Aaron! 👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻👍🏼👍🏼👍🏼 For those late nights fueling everything for the next day!

You guys remember that show that's Entertainment Earth That's Entertainment live they don't have nothing on you all always in each other's business aren't you that's what makes it so funny keep up the good work

Thinking ahead, I like it. Being ahead of the game pays off and a rain day in the shop gives you time to sort out a pipe rig. Keep up the good work Guys.

Heckle and Jekyll! Y’all guys! Are a treat! Fun video! Thanks for sharing! 👌👍

Really like that light tower, nice watching all the banter in the workshop as well. 👍🤗

My oldest brother always would say "If all else fails, read the instructions.😁

I can hardly wait to see this work! 😊

Next rainy day project: Saw Horses! #AaronBummManBehindTheScenesRules! 👍😎🤣

I made one for my job but I used large reinforced pipe at the top to eliminate any stress on the pipe plus made a large slide across the top ,for adjustment.

I believe you're going to need a lifting lug at the balance point for inserting and retracting from the pipe. You likely already have that figured out if you been using it already. Great video. Aaron, keep a good battery in that Go-Pro.

Good morning sunshine I love starting my day off with you & MBTS picking at each other I laugh the whole time & I enjoy it sooo much! Much love from Henderson Ga

Finally figured out what you were making. Looks great.

She is the "MIGHTY FINE UNIT" ! Leave it to you for another useful piece of equipment to get the job(s) done!

You should paint the location of the empty balance point. Don't forget, we want blue skys!

My former work "buddies" used to get a kick out of scaring me when I was torching , only their choise was a M80 dropped behind me. One particlur jokester also poured a half cup of 140# gear oil into the manifold pipe of an engine I was performing an overhaul on. The kicker that aded to his dastercly deed was the seriuous sounding loud bang/clunk followed by an abrupt engine shut down(never did figure the noise out. but the smoke sure got a reaction from me!

Jobs done, awesome. Entertainment value, priceless. Safe travels

You all have way tooooooo much fun. Thanks for sharing.

Great video Dirt Perfect and Aaron! I think you two should be the spoke “people” behind the scenes” of the fuel trailers. Thanks for sharing!!

🎉 can't wait to see what that thing does. If I didn't know it better, I would say you two are brothers😂 keep it up

That Aaron make my day better the stuff he says just crack me up you both work great together you should get him a little tike yellow chair

Okay, I probably should feel bad for this, but I did enjoy watching the crane control drag MBTS across the shop. 😁

Flat washers are normally designed and used on the nut end of fastener systems, to act as a bearing surface during tightening.

If I were to close my eyes and just listen to you two ladies,I might come to the conclusion that I was transported to a bingo hall😊

Project looks awesome guys

You two play great off each other.

Shopdays are great,nice video😂😂

I have no idea what you built, but I enjoyed watching.

FYI, You have at least 36 inches of weld around a 6 inch I- beam and about 9 inches around the lifting point. A 3/16 fillet is good for 2,784# per inch.

Those 2 guys are always ready for a good laugh or2😂!

Watching you two is like watching a long time married couple! You both make me smile. Can't wait to see whatever this is put to use.

Good morning!

Laurel and hardy back on our screens

Lights going to be a great for night work. Love your engineering on equipment for your uses. Love the entertainment always thanks for the video

You two argue like brothers 😂😂😂😂

Great video Mr Dirt Perfect and Aaron

Light system looks nice and should work well for you, the pipe lift should work well, any rate, beats lifting them with chain or strap to place them. Great idea with the handle the back. Thanks for the tag along video.

That was a fun video. I was laughing. When you to get together it's like watching 2 best friends working together. Fun and awesome video. Denis from Santa Rosa CA

Welcome back yo Another What we're gonna say today June the 20th Monday morning👍 NC

After thinking for a while, I think DP was right when he said you'd want the handle low so that you could pull back and up at the same time. And I needed that I beam to install an overhead hoist myself... still trying to find one at any of my local scrap yards with no luck so far.

great job shop banter makes the day.

I love the fabricating... though I might have put a quick-coupler connection for your 120 or 210 on it and treated it like a bucket... but that's me... Avoid chains when possible...

The only thing that thunder creek is missing is a lil grill on the back so you can warm up some burgers and dogs before lunch... and you got the light to work late, so warm up dinner too

Great fun great build great video thanks Mike and Aron

It meant to be you two like zig &zag. Since when this is comedy chanel it's good that you guys having fun while working.

Another great video. Save a lot of money building things that help. DP and MBTS

Hey this old timer is a expert on backing up with a tennis ball on a magnet. Its old school but it works. Love video thanks

Thanks for sharing, looking forward to seeing it being used. Wishing you and your family the best.

OMG I’m laughing my butt off, I about threw my coffee when that mud hit the camera! I about jumped out of my chair 😂that was hilarious

Use chain on the top to make an A, then chain binder for the long pice to adjust the angle it hangs for the weight and size difference

The way you and Arron talk to each other you would think you were related.

Great job love your videos thank you

Thank you everything a pleasure watch your video 👍👍👍👍

don't get me wrong I love the videos you and the man behind the scenes look like the 3 stooges some times and I sit here and about fall on the floor laughing just love it!!!

That’s a pretty sweet light plant. I’m curious to see how long it will last on a charge. Obviously it’s designed for daily maintenance and not a work light, unlike diesel/gas powered light plants. Unless you can feed it power while using. Surprised Chris didn’t get one…. Yet

Great video, great job. Sure is relaxing on a rainy day to be able to have some great camaraudery an get lot of work accomplished.

Just about always grinning when you guys get into it! 😁

Great video Mike and MBTS 🇺🇸

Always enjoy you two crazy fun guys.

Looking forward to seeing it on the jobsite DP! As always thank you for bringing us along on your adventure Mike!!

well those are some awesome welds

Hello from the Netherlands. i love the shop project video's thanks for the video Dp and Aaron . Sincerely Hollandduck

Great video keep them coming please

I dig the projects you guys do! Me and my buddies do stuff on a smaller scale sometimes

Gotta see it work now boys.

Love shop work Mike , Aron .