How To Make A Tour Pack Storage Wall Mount Cheap

Подписаться 106 тыс.

Просмотров 51 тыс.

50% 1

I'll show you the way I made a tour pack wall mount for under 20 bucks. Here is a list of the hardware I purchased.
4 x 3/8-16 x3 Round Head Bolt with Nut
4 x 3/8 Nylon Lock Buts (optional)
4 x 3/8 Split Nut Washer
2 x 1-1/4" x 1-1/4" x 36" Slotted Steel Angle - 18 Gauge
To make the brackets mountable to 2 wall studs I changed the bolts to Structural Connectors Threaded Rod which will allow you to have both brackets secured in a 16" spaced wall stud and have plenty of room in the middle to mount your pack.
Maybe fancy it up with some black spray paint.
JUST TO BE CLEAR, IF YOU BUILD THESE AND YOU DROP YOUR TOUR PACK....I AM IN NO WAY LIABLE. THIS IS FOR INSTRUCTIONAL PURPOSES ONLY.
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - sikbaggers...
Twitter - StevenHousden?lan...
Gear
Camera- Sony 4K AX53 - www.amazon.com/Sony-FDRAX53-V...
Wireless Mic - Samson Go Mic Mobile - Samson-Mobile-Professional-Lavalier-Wireless/dp/B0749WP3M3
Wired Mic - Maono - gp/product/B01M4J5WCM
Shotgun Mic - Comica - gp/product/B06XBX3X7K
Video Tripod - COMAN-KX3636-Professional-Aluminum-Camcorders/dp/B01NA8PIZX
Ultra Tripod - gp/product/B01419PIMK
Light Tripods Zomei Z818c- gp/product/B013YDWR46
Zomei Z818 - gp/product/B013UESDJC
Video Lights - Samtian LED Video Lighting - SAMTIAN-Camcorder-Barndoors-Batteries-Photography
#sikbaggers #advanblack
The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers and/or Advanblack does not make any representation or warranties with respect to the accuracy, applicability, fitness or completeness of the video content. Steven Housden, SIK Baggers and/or Advanblack does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of Company. The mere appearance of Video Content on the Site does not constitute an endorsement by Company or its affiliates of such Video Content.
Steven Housden, Advanblack, SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.

Авто/Мото

Опубликовано:

23 янв 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@EzlivnMaine 6 лет назад

One thing I might suggest is....when handling your tourpak.....or actually before handling your tourpak....make sure the latch is locked. We have a tendency to grab onto the latch....and if it is not locked....it will snap open and could do damage. Just my 2 cents

@sikbaggers 6 лет назад

Thank you John and thats some great advice for the other guys too! I'm pinning this comment to the top. Something I should have mentioned but I always keep mine locked so it never crossed my mind. Thanks again brother.

@strandednseattle 4 года назад

It's funny how often that happens. Ill be riding down the road and my brother next to me has his trunk popping up and down.

@rickmetzler3054 5 лет назад

Nice man - This video came up on my search of alternatives to the purchased products and I'm glad to see your approach---Plus I'm riding a '14 SG so kinda cool - Be Safe !

@tdaman62 3 года назад

Thx! Great DIY video.. I went ahead and used the all thread to bolt to the wall studs 16” os. Works great

@dabreden 4 года назад

Damn!! Talk about a cheap piece of equipment. Why in the world would anyone use this? Now I gotta go to Menards and spend money. I have been looking for ways to hang my tour pak for a while now. Thank you so much. 34° out but going on my bike

@Bootknife1099 9 месяцев назад

Dude, you guys are awesome

@TheRustyGarageandHomestead 5 лет назад

Steven this is awsome. Thanks for putting this out there and thank you for all the time and effort you put into these videos they help alot.

@sikbaggers 5 лет назад

Hey Mike..I appreciate that man. Thank you for checking out the videos. We have some new stuff coming up. If you're on Facebook check us out at SIK Baggers and join up..a lot of good dudes in there

@TheAssaultcraft 3 года назад

Was sitting here thinking of a way to do just this. Great job.

@timsmith3151 5 лет назад

Brilliantly simple! Most logical design I have seen!

@sikbaggers 5 лет назад

Thanks Tim...been hanging since I made the video no issues..cant beat it for the price. works great!

@TheYulick 3 года назад

Muito obrigado pela dica!!! Idéias simples e econômicas que funcionam tão bem quanto as originais caras!!!

@sed7115 6 лет назад

Thanks for the video Steve. Just built this and it works great, long enough to hang tour pak and back rest.

@sikbaggers 6 лет назад

Nice!! Glad that it helped...much cheaper than buying one for sure!

@electraglideclyde 4 года назад

You can still use your 16" center studs, just use 18" of all thread instead of bolts. Also, turn the tour pack upside down and let it rest on the bottom all thread while you can still lock the latch on the top side. If you want to get fancy, use a piece of 3/4" pipe on the all thread. Just a thought, Thanks

@nevillegreg1 6 лет назад

Very good.

@nadovidaich2364 2 года назад

Nice, thanks for sharing. I will make one for sure……..👍

@dennisberg570 2 года назад

WOW , very nice job and a money saver . I just bought a chopped tour pack for my 21 streetglide special , and your wall mounting system is definitely the way to go . THANKS

@sikbaggers 2 года назад

Thanks this video is very old and I still have this one up and just built another one for my other pack for the road glide..about 20 bucks maybe at local big box hardwire store..(Menards) if you have one in your area or Home Depot.

@brittanymetivier4957 2 года назад

Thanks SIK baggers works great no issues at all👍👍👍👍👍

@geraldfleming4837 2 года назад

Thanks for the advice. Easy to install and cheap as well.

@sikbaggers 2 года назад

Glad the video helped you!

@nlneihoff 3 года назад

Just built one for myself today. Thanks for the great video! Works great.

@sikbaggers 3 года назад

Glad it helped!!

@superduty131 6 лет назад

Fantastic !!! Been thinking of a wall mount and here you go! Thanks for another great video. I agree with the use of all thread instead of bolts. Going to get this made and installed.

@sikbaggers 6 лет назад

Hey Scott. Yes sir, I think the threaded bolt stock will be much better ...I think they were around 4 or 5 bucks vs the 2 or 3 bucks I payed for the bolts and washers.

@76bluefl 6 лет назад

Good idea for getting the tour pac up and out of the way. One more thing though. If you purchase a stick of 3/8 CPVC and cut it to length, it will slide over the allthread and give the plastic pieces on the rack a softer, smoother surface to lay on instead of the metal threads of the rod. I built a rack for my Airwing luggage rack & Sissy Bar and the 3/8 pvc works great.

@leesg3 6 лет назад

Great idea.

@sikbaggers 6 лет назад

Thank you Lee.

@willwarro4054 2 года назад

i would add some thin wall plastic tubing over the bolts small enough to fit inside the tour pack bracket slots to keep bolt threads from gouging into the plastic and chrome tour pack bracket slots.

@jerry-riverbluffbaggers3910 6 лет назад

Sweet!

@sikbaggers 6 лет назад

Thanks for checking it out Jerry! Pretty easy deal.

@kimoh.3519 6 лет назад

Good stuff 👍 Way better than how I was hanging mine "by straps" LOL

@sikbaggers 6 лет назад

Kimo H. I'd say this is a little more secure lol but hey if it works.

@mikerosegonzales624 2 года назад

Why will my I phone not sync to through the aux cord but works thru blue tooth on my 2016 road glide ultra. I updated the infotainment system by using your video and it worked fine, thanks for that

@Kenleighsway 6 лет назад

Very nice

@sikbaggers 6 лет назад

Thank you for checking it out. Pretty cheap and works great.

@eddiealvarez5493 4 года назад

" Thanks " for the share . that'al work.

@sikbaggers 4 года назад

Youre welcome

@redtruck32 6 лет назад

Whats the spacing measurment of the the 3”bolts? Thx

@redtruck32 6 лет назад

I like it

@sikbaggers 6 лет назад

thanks man

@bobgil3464 5 лет назад

Looks good still nervous coming home one day and its on the garage floor.

@sikbaggers 5 лет назад

mines been hanging since I made this video..no issues if you lock the pack down ...you can also flip the pack so the U shape is at the bottom and then lock the top in. They sell similar set ups pre made for over 200...this is just a homemade version to save some money. thank you for checking it out.

@lloydedmonds8775 6 лет назад

Nice Post!

@sikbaggers 6 лет назад

Thank you Lloyd!

@Livefromthebasementbar 3 года назад

This is brilliant! Got to do this in my garage!!

@sikbaggers 3 года назад

I now have 6 lol...they work great and if you're ballin on a budget you cant beat it!

@Livefromthebasementbar 3 года назад

@@sikbaggers haha! I’m definitely gonna do this my 05 Electra glide “Amazon” build! Lol this falls under ballin on a budget for sure!!!

@sikbaggers 3 года назад

@@Livefromthebasementbar nothing wrong with that..I have a whole series on youtube called ballin on a budget where I used a lot of amazon parts. Good luck with your build!

@joeyblazik7990 3 года назад

Mainly I would like to know where to get a replacement seat after I remove this hideous tour package on my 1996 Ultra Classic

@rosekransconst.2495 4 года назад

Very nice Menards tomorrow

@sikbaggers 4 года назад

Yes sir...very easy to make...If I did it again I would probably use the threaded bars instead of the bolts...that pack is still hanging on my wall however since I made this video..you can see it in some of the newer vids...stick holding strong

@joeyblazik7990 3 года назад

I just want to know how to take the tour package off properly!

@JohnDoe-yj9tj 6 лет назад

Try mounting it 180 degrees from whats in the video, so itll slip into the front tour pack notch easier...backpad facing down...just an idea.

@travisgray3331 5 лет назад

I tried that but the weight of the tour pack then is leaning forward and putting all the weight on the plastic quick detach clips...just something I noticed

@Cokebeard 5 лет назад

when i watched this, I, like john doe, wondered why you didn't flip the tour pak around and lock it in from the top down. to me that seems safer as it won't fall straight down as you try to lock in the 'back'. have you tried mounting it this way? is there something with quick release that worries you?

@sikbaggers 5 лет назад

No sir... U can mount it either way... Mines been hanging theee for awhile like that... No issues.. Either way works though

@M_J_Glide_22 Год назад

just use wall lags for the ones with no stud

@tonypetoscia1481 5 лет назад

I don't see the description

@sikbaggers 5 лет назад

If you're on you're phone right up next to the title. There is a little grey arrow on the right. Click it and it'll open the whole description

@jonboast5687 4 года назад

So I went and built this only to find that there is a part of the rear mount that protrudes off of the mount, past the plastic clips, that hits the wall before the plastic clip can engage the all-thread rod...

@sikbaggers 4 года назад

pull your stud bolts out on the bottom and add some fender washers behind it. Make the rack attached to the wall at an angle so you have more clearance. If you need to buy longer stud bolts.

@jonboast5687 4 года назад

Ya dude I actually just stuck some 1x4 i had around just ending the angle iron at top and bottom... spaced it out nicely and I’m rockin and rollin! The all-thread flexes a bit much for my taste so I’m gonna get some stainless tube to slide over it and solidify things a bit more... I also added an anchor point above it that I just tie off a rope to as security 🤘

@jonboast5687 4 года назад

@josephthibault6999 5 лет назад

I don't think the wall stud is needed.

@sikbaggers 5 лет назад

If you want to hang your 1000 dollar tour pack from drywall or particle board, go for it. Ill put one in a stud.

@josephthibault6999 5 лет назад

@@sikbaggers You are right it is your tour pack. Just pointing out that things a lot heavier and expensive than a tour pack are held up by less every day.

@josephthibault6999 5 лет назад

@@sikbaggers Also I usually just take 2x4 scrap and bridge the gap between the studs for things like this because 2x4s are cheap and easy to work with. In your case 2 20 inch 2x4s would probably work perfect.