How To Make An Electronics Tray - XS400 Build

Подписаться 120 тыс.

Просмотров 12 тыс.

50% 1

How to make a cafe racer electronics tray! The "Wanda" XS400 build is finally rolling with real progress and this time its is going over the electronics to be used and where they will fit. Watch as I show you exactly how I make my electronics trays in real time on this bike for a super clean look when done.
Next up will be a very cool seat so stick around!
All the NWT products I am using can be viewed at:
nwtcycletronic...
We actually have a Christmas sale going on until 12/20 so jump on the deals while they are available!
brickhousebuil...
www.nwteurope....
Previous episode giving the bike a once-over:
• XS400 Build Is Back! E...
If you found this video helpful or simply wish to support the channel further feel free to donate to the "Tip Jar" via the paypal link below! Anything is very much appreciated!
www.paypal.com...
Brick House Builds Amazon Storefront
www.amazon.com...
For updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms!
Instagram - / brickhousebuilds
Facebook - / brickhousebuilds
Website - www.brickhouse...
Tik Tok - / brickhousebuilds
#brickhousebuilds #xs400caferacer #caferacerbuild

Авто/Мото

Опубликовано:

19 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@andymiller5611 Год назад

Informative, nothing unnecessary, just good advice with a clear delivery. Another excellent video, man! Great work! 🍻🤘💜

@BrickHouseBuilds Год назад

Thank you much!

@yoshuavillar Год назад

You are legit! This video's such a godsend

@BrickHouseBuilds Год назад

Thank ya! Glad it is helpful!

@keithhampton9700 Год назад

GREAT JOB!!Seat rails done rite. I miss my 76XS400😢

@BrickHouseBuilds Год назад

Thank ya!

@mrkang4080 Год назад

Perfect timing on this video, I'm looking to do mine before xmas. Thanks again.

@BrickHouseBuilds Год назад

Awesome! Looks like I scheduled it juuuust right!

@MP-br4pj Год назад

been binging almost all your vids last month, what a blast. And now we even get a new vid! thanks for the great content

@BrickHouseBuilds Год назад

Well I appreciate that! I normally try to get out a video per week with most weeks getting two but I haven't had enough time lately. Hopefully Ill get back on track

@sixfive0cycle Год назад

Nicely done! Looking forward to thr wiring videos on this one, planning on doing that with my CB550 build coming up!

@BrickHouseBuilds Год назад

Definitely planning to make some!

@Baseballkid2234 Год назад

Damn that’s clean looking.

@BrickHouseBuilds Год назад

🙏🙏

@keithagn Год назад

Nicely done! Regards from Canada 🇨🇦

@BrickHouseBuilds Год назад

Thank ya Keith!

@DIYwithUncleCy Год назад

Good to see "Wanda" back in the shop. Looking forward to the rest of the build.

@BrickHouseBuilds Год назад

Feels good too. Been far too long!

@jimclarke1108 Год назад

Great job, stronger frame as well

@BrickHouseBuilds Год назад

Thanks Jim!

@roamingearth915 Год назад

Wanda :) great video ....clean !! Nice setup......I'll get there.

@BrickHouseBuilds Год назад

🤘

@danielbrown9469 Год назад

That's great! Thanks for posting this. 👌

@BrickHouseBuilds Год назад

Glad you liked it!

@larrykay6606 Год назад

Suddenly I crave DiGiorno pizza. Great video!

@BrickHouseBuilds Год назад

Hahaha thank ya!

@MotoMango Год назад

Excellent work Bj!!

@BrickHouseBuilds Год назад

Much appreciated 🤘

@yarenoz8360 Год назад

You've done a great job

@BrickHouseBuilds Год назад

Many thanks!

@christopherastbury6644 Год назад

excellent informative video, explaining as you progress.

@BrickHouseBuilds Год назад

Thanks so much!

@luizfaustodeoliveirafraga7150 9 месяцев назад

Parabéns trabalho profissional, solda maravilhosa.

@BrickHouseBuilds 9 месяцев назад

Thanks so much!

@bmicona Год назад

Awesome video dude! This format is cool, but I typically watch them all also

@BrickHouseBuilds Год назад

It was much harder to edit and I feel it lost a bit in detail BUT....I cut it from 45 minutes to 19 lol. Thank you though

@bmicona Год назад

@@BrickHouseBuilds I was thinking that while I was watching- how much more time it must have taken to make a shorter video. Finding that balance to get the information you want to put out and keeping your engagement up is a tough task. I guess when you see how the analytics change you’ll know if it’s worth it. I do somewhat think that the type of audience invested in bike build content is generally more meticulous about things and isn’t turned off by long form content, but I could just be speaking for myself. FWIW, I was able to follow everything you were doing in this video, I don’t feel like I missed anything.

@BrickHouseBuilds Год назад

@@bmicona really appreciate the input. I value that. You are very likely correct on the audience type being ok with longer form

@MrNiklas1967 Год назад

Nice to se a new video

@BrickHouseBuilds Год назад

Let me tell ya it feels equally nice to actually put out a new video lol

@dreamin47_ Год назад

Great tips, giving me ideas about forming the base for my 750 seat build rigid frame. Thanks always

@BrickHouseBuilds Год назад

Glad they were helpful!

@jorgedanielenriquez2191 Год назад

Perfec "bandeja" for e elements. Thanks against, man.

@robertadams4415 Год назад

Thanks for the info BJ

@BrickHouseBuilds Год назад

My pleasure 🙏

@paulwood3867 Год назад

Bj get some round hammer attachments for an air chisel,,works surprisingly well with no marks left

@BrickHouseBuilds Год назад

I appreciate it but just not one of the tools I like to use for detail stuff

@upsidedowndog1256 Год назад

That looks nice! I have never worked with steel like that. The aluminum I work with is much less forgiving and not weldable. I look forward to trying to work some sheet steel in the future.

@BrickHouseBuilds Год назад

Id agree on the aluminum. Ive only tried to use 6061 but next I want to give some 5000 series a try as it should be easier to bend

@BlueSkyInt 4 месяца назад

Nice Job and clean. Why did you choose to weld onto the frame instead of screwing?

@BrickHouseBuilds 4 месяца назад

Thank you! I like how clean it is when welded

@barnesfamily1779 Год назад

I like the fact you use gal sheet metal but,,, the uncoated part of the frame tube are seriously prone to rusting, after the tray is welded in you can't paint that part of the frame the tray is lapped up against. Major flaw considering the rear wheel will be throwing up all sorts of crud. In my humble opinion , I would design this problem out of the equation , other than that, its a good informative video showing one method of getting it done

@BrickHouseBuilds Год назад

Well I've yet to have a problem in the years I've done it this way.

@Mo_G Год назад

Hi me i asking u sir i find like this old bike xs and the owner ask 2000 $ , is it good price and he said it got rebuild as cafe race ? and secand questions is it reliability bike has that much age do i can drive it everyday ?and thx for the video i enjoy

@BrickHouseBuilds Год назад

That is very hard to answer without seeing the bike. Send me an email with pics to bj@brickhousebuilds.com if you want and I can give a better idea

@robertboyer5498 Год назад

Any reason not to drill a couple drain holes in that tray just in case water gets in?

@BrickHouseBuilds Год назад

That gets brought up often when I make a tray video actually. The bike simply doesn't get ridden in the rain. In all the bikes I've done over the years they have never been in the rain so its not a big concern to me. My cx500 scrambler however will get a couple small holes as it is destined for offroad.

@robertboyer5498 Год назад

@@BrickHouseBuilds but it won’t be a problem if I do it on mine then? I don’t think mud would get up there, because I ride in the rain and sometimes leave my bike in the driveway. That’s what I was wondering about. Thanks

@BrickHouseBuilds Год назад

@@robertboyer5498 Having a couple tiny ones in the lowest set of corners would have no downside