All the links are given in the description, But some of the products are currently not available/outdated now. We can help you configure something better in similar budget. Feel free to contact us. Thank you
Sir i have a problem with making drone I have already purchase drone parts and assembled perfectly but problem facing in betaflight arming disabled showing and in betaflight configuration reciver tab spinning automatic
Hey i have one question, can DJI camera air unit O3 paired with DJI GOggles V2 work with any drone build?? i mean can any drone build with any system work with this Camera and Goggle set or we need to go completely DJI to make it work ?
Yes, You can use any controller. DJI O3 has built in receiver that can be used with DJI FPV Controller. It is a benefit if you already have DJI FPV Controller. If you would like to use an external controller along with DJI FPV controller, You will have to switch between the receivers in betaflight each time. Plus you will have to solder additional receiver for the external controller.
I'm planning to build one, but to reduce the price further, I'll try to use a cheaper transmitter like Flysky FS-i6x and skip goggles for mobile phone (with a video rx). Hopefully this alone will cut ~15k. Any suggestions further?
We will never ever recommed FS-I6X. This will be a very bad idea. You won't be saving any cost, But wasting money twice. Instead go for any ELRS controller, like Radiomaster Pocket which you can get for around 6K in India. For goggles, No need to get EV800D, You can go for cheaper version EV800 or a basic goggles like VR100. The mobile + OTG receiver won't work good if you plan to use it as FPV Goggles. If you want to cut cost; 1.Go for a cheaper frame like Martian II or Apex clones 2.Go for a cheaper stack like HGLRC Specter F460 3.Consider buying Radiomaster Pocket 4.Change FPV Goggles to EV800 5.Change charger to ToolkitRC M6 V2
which soldering iron and screwdriver kit are you using pls tell i am looking forward to buy stuff related drone building from your site cuz i am starting to make a digital fpv drone
Hello, We are using Sequre D60A soldering Iron in this video. But we will not recommend it. You can go for a good soldering station depending on your budget. We are using TBS Hex drivers.
Hello. You can use a Liion Battery Pack to get more flight time, Or use Li-Po that has more capacity like 3000Mah. But you will be compensating perfomance over flight time. You can only get around 5 minutes with the best perfomance. Using Higher capacity or Liion will get you more flight time, But it is only good for cruising. Thankyou.
There was only one unit available which was used in this video. But we can get you something in similar budget. Kindly contact us if you are interested. Thank you
I have a fpv drone with your parts! But i have a problem My goggles range is only 150m with full power of vtx (800mw) EV800D goggles and Tmotor ft800 800mw vtx.
Flight time is around 5 minutes, Range depends on many factors including the environment. In open ground, You can get around 1km range. We have tested for around 1km. But if there are obstacles, then range can be as low as 100m or less. Thank you
Range depends on many factors inlcuding but not limited to, Antenna, Antenna orientation, Output power, Environment etc. In open ground, we got morethan 1km video range. But in environments with many interference, and obstacles range will be poor and it may not be morethan 200meter.
Range depends on many factors inlcuding but not limited to, Antenna, Antenna orientation, Output power, Environment etc. In an open ground, you can get morethan 1km video range. But in environments with many interference, and obstacles range will be poor and it may not be morethan 200meter.
Am a dji cinematic drone user. Have a great interest to change to fpv custom build. But have a doubt,what happen when transmitter and receiver out of range while flying. What will happen to drone.
Hello It is called a fail safe. If you have GPS on it, then you can configure Return to Home function in it. Else, drone will fall out of the sky or will land there according to your fail safe configuration. Thank you.
@@abhijeetbara5610 Yes, You can improve flight time by using Li-ion battery instead of Li-Po. But by compromising perfomance. Normal flight time with best perfomance for 5" FPV Drones is around 5 minutes or less.