How To Make Camera Battery Charger, Simple And Quick Homemade Camera Battery Charger
hello everyone welcome back to multi-channel RU-vid services and entertainments
this video about making Camera Battery Charge at home
it can be for any Camera or camcorder or even cellphones Battery the most important thing you need to know is Battery voltage and Amps
for example if the battery information says
3.7 V
500 A
then you need Charger just little bit higher or same charger anything between
4 V to 5V
500 A To 650 A
things you need
1- small pieces of wood such as 1" × 1" or so
2- wall Charger According to Battery info
3- drill
4- Krazy glue or any glue such as hot glue
5- 2 small screws or hard wire or nails
6- USB cable charger
7- watch this video
8- thank you so much for watching
9- please subscribe 🙏 like and share 😊
other videos
• 33 Years Old Very Rare...
• Testing And Reviewing ...
• Quick Test DJI Osmo 4K...
this is multi-channel random videos uploaded regularly
please subscribe 🙏 like and share 😊
Best regards and hope to see you next video
here are some information about Chargers info
1.0A means that there's a 1.0 Amp of charging speed. 1.0 is the slowest charging speed and should be avoided with most charging electronics. Standard Amp charging for chargers are 2.0 Amps and 2.1 Amps. The highest rate of amp charging that you can get from standard charging technology is 2.4 Amps.
The product of current strength (amperes, A) and voltage (volts, V) is power (watts, W), according to the formula W = I · U. ... Nevertheless, the standard is usually 5 V, with a current strength of 1.0, 1.5, 2.0 and 2.2 A, that is, from 5 to 11 watts. Everything above is classified as fast charge
8 сен 2024
