To make a clipper blade machine sharpening disk with flat wood and sandpaper, you will need the following materials:
• Flat wood (plywood or MDF)
• Sandpaper (grit size depends on the level of sharpening required)
• Compass or circular object to trace a circle on the wood
• Saw to cut the wood to the desired size
• Drill to make a hole in the center of the disk
• Screw to attach the disk to the clipper blade sharpening machine
Here are the steps to make the clipper blade machine sharpening disk:
1. Trace a circle on the flat wood using a compass or circular object. The size of the circle should be slightly larger than the clipper blade.
2. Cut the wood to the desired size using a saw.
3. Sand the wood surface to make it smooth.
4. Attach the sandpaper to the wood using glue or double-sided tape. The sandpaper should be cut to the same size as the wood disk.
5. Drill a hole in the center of the disk. The size of the hole should match the size of the screw on the clipper blade sharpening machine.
6. Attach the disk to the clipper blade sharpening machine using the screw.
7. Turn on the machine and sharpen the clipper blade by running it over the sandpaper disk.
It is important to note that the level of sharpening depends on the grit size of the sandpaper used. A finer grit size will result in a sharper blade, while a coarser grit size will remove more material from the blade. It is recommended to start with a coarser grit size and gradually move to a finer grit size for optimal results.
5 сен 2024