How To Make CONCRETE Statues Using Your 3D Printer (EASY DIY TUTORIAL)

Подписаться 166 тыс.

Просмотров 31 тыс.

50% 1

In this video I will show you how you can make your own custom concrete statues using your 3d printer at home. Using this method, you can transform virtually any 3D model into a 2 part mold to cast concrete into. You will need to use TPU filament with your 3d printer, some mold release spray, and the cement/concrete of your choice. You will also need to download Meshmixer which is a free program for anyone to use. There are other programs that can do the same thing but for this tutorial I'll be using Meshmixer. If you have any questions, please leave them in the comments section below. If you like this video, please give it a thumbs up and hit that Subscribe button for more.
Thanks For Watching!
#3dprinting #Concrete #MoldMaking
******GRAPHITE MOLDS********
To purchase the molds as seen in my videos, visit www.ArtByAdrock.com
******TPU Filament****
amzn.to/4cfFnZd
******CEMENT USED****
www.ctscement.com/product/cem...
******Mold Release Spray****
amzn.to/4eeSeNb
****Devil-Forge*******
www.devil-forge.com
*****GTHIC RINGS*******
The Rings I'm wearing are from bit.ly/38YOy06
Save 20% with Discount Code "ADROCK20"
***GLUE***
Save 15% by clicking on the link below
Starbond Glue - www.starbond.com/?rfsn=327773...
***DISCLAIMER****
This video is for entertainment and educational purposes only. Do not try and replicate this at home unless you know what you are doing. Molten metal is extremely hot and dangerous so always use precaution and wear protective gear when melting metal.
****SOME OF MY OTHER VIDEOS**** (On My Other Channel - ArtByAdrock)
Casting A MINI Copper Darius Axe From League Of Legends(X2) - Turn Scrap Copper Into Art - • Casting A MINI Copper ...
Casting A Solid BRONZE Katana & Ingot From Scrap Copper And Tin - Monster Bronze Melt - • Casting A Solid BRONZE...
Melting Aluminum Cans At Home - Easy DIY Recycling Process - • Melting Aluminum Cans ...
Casting Mulan's Sword From Scrap Aluminum Ingots - DIY Metal Sword Making - • Casting Mulan's Sword ...
Melting Copper Pipes Into A BRONZE Black Prince Dagger - • Melting Copper Pipes I...
Bullets To Blades - Casting Double Mini Blades Of Chaos (God Of War) - • Bullets To Blades - Ca...
Aluminum Casting Aquaman's TRIDENT - • Aluminum Casting Aquam...

Развлечения

Опубликовано:

13 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@ArtByAdrock Месяц назад

Hey everyone, quick video today on how to use your 3D printer and some TPU flexible filament to make some 2 part molds for casting concrete. This method will also work for resin or anything else you want to pour (besides high temp metal of course). I’m using Meshmixer but most 3D modeling software will do the same thing. Enjoy and I’ll see you all in the next one! 👍🏻

@chrismcnamara2612 22 дня назад

You can just make your STL a negative part in the slicer . Then just put it in a big block cut it in half and put a hole in it

@hozn 11 дней назад

Sounds way easier. And the registration would be the edges for alignment

@TGAW3D 5 часов назад

Both the owl and the gnome came out fantastic! Thanks for taking the time to share your process. I so want to try to make something out of concrete now! Have a great day!

@armageddontools Месяц назад

Time to make a warhammer 40k battlefield out of my garden !

@iamaraindog385 Месяц назад

40K Garden Chess Set...

@emmamarx9284 18 дней назад

Interesting approach, as far as the registration marks go I wouldn’t bother cutting the sphere in half, just embed normal spheres into the model and Boolean union them. then after you finish adding your registration marks to the positive side you can just Boolean it from the negative side and boom you’re done! 😊

@s0upcan2323 Месяц назад

This is the exact tutorial I was looking for. Thank you!

@deaultusername Месяц назад

for the Rubber bands it by be worth including a cylinder or two into the outer walls shape and splitting that along with everything. This would spread the rubber band force much more evenly especially for shapes that are not as rounded as the owl

@bluedot7817 21 день назад

Good thought slick, amazing how we can manipulate points in space digitally, yet we can't afford a home without a mortgage. Banks be tripping.

@xfarsys 22 дня назад

Amazing 😮 this is the easiest way to make a mold that i have seen. Thanks for sharing

@bluedot7817 21 день назад

Are you truly seeing or merely perceiving, and what qualifies as sight? Can one see through stone with the third eye?

@Spirited282 Месяц назад

Fantastic video. I will for sure make a larger scale statue for my yard. Thank you

@PolycultureArt Месяц назад

Wow! I have been researching sofubi and silicon moulds for months and this whole time I have been thinking resin, resin, resin! It never occurred to me that I could make concrete casts! You have opened up a whole new avenue to explore! Thanks so much for making this video!

@mariarzyt_3D 19 дней назад

That's awesome, thank you so much for sharing!

@nicamarvin Месяц назад

Beautiful, Thanks for Sharing.

@patrickdjebar9225 Месяц назад

Just huge, thank you for sharing this

@ArtByAdrock Месяц назад

You’re welcome 👍🏻

@dennisdecoene 16 дней назад

I really liked this process and will try it soon! Thank you for sharing!

@JamsterJules Месяц назад

Love it - definitely going to make something. Great video

@rickypsencik5947 Месяц назад

That is cool. 😊

@jasonfarris4766 Месяц назад

Your awsome thanks for the vids

@mr.grotto 22 дня назад

For someone who was trying to figure out how to make models to create silicone molds for, this helps even that approach. I will probably make those registration marks holes and add magnets.

@emmamarx9284 18 дней назад

That seems like a lot of extra work and wouldn’t necessarily give you any real benefit, in fact you’d be more prone to shift lines because the magnets have quite a bit of play in them. If you’re gonna go that route I would still keep some of them as registration marks to help align the mold. Also you’re still going to need to use rubber bands to keep the pieces together, magnets alone won’t be strong enough to give it a good seal.

@emmamarx9284 18 дней назад

Also I just realized you’re making silicone molds so magnets would be out of the question to begin with unless you plan on embedding them and covering the holes up with more silicone? I wouldn’t even try that honestly, they’d be prone to delaminating and it would be a major hassle. There’s a reason registration marks are the industry standard, it’s because it works. Hope this helps, silicone is expensive as hell so I don’t want you wasting your money

@mr.grotto 18 дней назад

@@emmamarx9284 no I mean for the 3d printed molds, not the silicone. I would totally try to put magnets in the registration marks.

@mr.grotto 17 дней назад

@@emmamarx9284 The point is I want to try. I would have registration points to align it and magnets on both sides just to pull it together.

@emmamarx9284 16 дней назад

@@mr.grotto okie, that should work then, I just wouldn’t rely on magnets alone due to the crazy amount of play magnets have. But yea if you have registration marks alongside your magnets you will be good to go. I still don’t really know why you’d want magnets though? Seems like an awful lot of extra work for a benefit I can’t really see. 🤔

@JulianMakes 14 дней назад

Well explained thank you!

@christophec.482 21 день назад

I had a shot every time he said "I'm gonna go ahead". It's my third trip to the liquor store.

@hozn 11 дней назад

I gotta try TPU soon.

@MattMelts Месяц назад

Excellent work, friend. I have mentioned your channel in my videos. I enjoy the technical edge of your content, as I work in tech during the day. Great tutorial!

@k_DEDb07 Месяц назад

very cool 😎

@bluedot7817 21 день назад

Are you sure?

@notflanders4967 Месяц назад

I think it would have been worth explaining why you split the mold the way you did, so people understand how to do it themselves. For those that don't know, the shape of the object you wish to cast dictates how you spilt the mold. You have to consider how the two halves will pull apart, considering the hardened concrete that will be inside. If @ArtByAdrock had split the mold 90 degrees from how he did, pulling the mold off would be almost impossible because of the ears protruding up into both sides of the mold. Although that TPU might allow for more careless mold slicing. I've been working on a project, basically the exact same thing. I printed my mold in PLA, but with it being so rigid, problems arose (the shape of the cast made it impossible to remove the mold) I thought I had it sorted out on my 2nd mold, but I still had some minor hang ups. I've got it dialed in now, but I won't be messing with PLA for molds anymore, for several reasons. I can't wait to get this TPU dehydrated and in the printer!

@ArtByAdrock Месяц назад

Thanks, I probably should have mentioned that more. TPU allows for the flexibility but anything with crazy overhangs is going to be difficult. You could slice it into multiple pieces but you’ll have more parting lines and have more registration marks to include making it harder.

@doctoroctos 28 дней назад

I now only plane cut with bambu slicer. Since its slicer easily allows adding of alignment pins or dowels, its soooo much easier than meshmixer. The rest of the video was on point. Thinking about using this for some projects. One other tip, in construction, they use non specialty tools for vibrating forms. This is cheaper than buying a specialty concrete vibrating tool. I have personally used a jigsaw with no blade, or a sawzall with no blade. These can give better vibration than simple tapping.

@bluedot7817 21 день назад

Future problem solver right here son. Always found "future" problem solver to be a condescending title for a school club, like why aren't they solving problems now? Like saying someday son, *patted on the head*

@darrennew8211 15 дней назад

Prusaslicer, fwiw, allows alignment structures too.

@hansherrera6969 5 дней назад

for the bubbles try putinng a massge gun to vib out the bubbles or a drill on the side will vibe out the bubbles if u want

@aa.design.excellence 23 дня назад

You could print single use vase mode funnels out of recycled pet plastic to pour your cement

@bluedot7817 21 день назад

Well you could do that now couldn't ya? What's it to you? Vanity?

@darrennew8211 15 дней назад

I was trying to figure out what the shape might have to be to use PLA or PETG instead of TPU. Maybe something that's flat on the back, like you'd hang on a wall? Or would it just not work at all?

@Knowyourbody 26 дней назад

This is a concrete example of the awesome things that can be done with a 3D printer. Well done!

@bluedot7817 21 день назад

Smacked it hard upon my birth, dropped on my head really, so I point to my resume and say school of hard knocks mr. Bossman.

@ahwhite1398 4 дня назад

Haven't seen a pun like delivered so well since the Flintstones.

@NETBotic Месяц назад

I've been wanting to do this for so long. I was thinking of printing a positive and then casting that in silicon but I might try the TPU instead now. I didn't know mold release worked with TPU and concrete.

@ArtByAdrock Месяц назад

You’d get better detail with the silicone if sanded and primed but that costs a lot more especially for large pieces. This way is much cheaper so if you mess up it’s simple to start over. 👍🏻

@NETBotic Месяц назад

@@ArtByAdrock Good point, love your work dude.

@dustindoesstuff374 18 дней назад

Great job! How much filament was used?

@3d_pablo 25 дней назад

great video. how many uses are you getting out of the molds?

@bluedot7817 21 день назад

3.1415 maybe times that by 1000 and multiply by the speed of light. Are you some kind of physicist?

@sideburnchef4957 Месяц назад

Why not use Prusa Slicer? You can do a planar cut and it automatically generates registration marks. Even making the hole is easier. 😅

@crow78376 Месяц назад

Looking to make full size Great Dane statues , what would you recommend …

@bluedot7817 21 день назад

Dogmeat raw raw raw. How did that turn out slick?

@AgentPothead Месяц назад

That is super rad. Thanks for showing each step along the way for people not familiar with mesh mixer. How many shots have you gotten out of each mold before they become unusable?

@bluedot7817 21 день назад

Enough to store for winter slick, I've got concrete acorns on the shelf like a squirrel. What is a million dollars to a rodent? Means very little unless they understand the concept of money, maybe humans don't either?

@AgentPothead 21 день назад

@@bluedot7817Know how I know you're a chat gpt commenter? Go on. Guess.

@bluedot7817 21 час назад

@@AgentPothead I do use the wretched natural language processor, but not while making these ghastly comments. It very well be my autism though, I read this two weeks later and think, wtf. I may not be human either.

@AgentPothead 21 час назад

@@bluedot7817 Lol it's okay bro I was mostly making a joke. 😁

@bluedot7817 4 часа назад

@@AgentPothead It's all good man, it may be my daddy issues. But I'd think a TPU mold could last for many moons, my ancestors told me in a trance. May your molds be as plentiful as the mold on my bathroom ceiling, I should get a cleaner in here crimeny. ✌

@godfatherfeederfather6350 6 дней назад

How do you clean the mold?

@agguilarmetalwork4494 25 дней назад

Hi thanks for the vide great idea ! One question is the software free to use ?

@ArtByAdrock 25 дней назад

@@agguilarmetalwork4494 yes it’s free

@bluedot7817 21 день назад

Sometimes when I'm nervous I run my zipper up and down on my v neck, is that concerning? Are you a psychoanalyst? Imagine client walking in seeing your damn face. Beautiful man. I like anybody with a smokers voice, I know they've been through the sh!t seen a few things know the truth about the world.

@godfatherfeederfather6350 День назад

Where do we get files like the Owl to print?

@leonidkantanovich6725 Месяц назад

Спасибо🙏💕🙏💕🙏💕 лайк🙏💕🙏💕🙏💕 👌👌👌👌👌🆗🆗🆗🆗🆗👍👍👍👍👍

@Rafi_3D День назад

Is there a way to avoid that seam on the sides of the statue?

@ArtByAdrock 18 часов назад

There’s always going to be a seam it’s just a matter of trying to hide it in the right spot. You could always grind it down a little after to smooth it.

@mostafam07amed 2 дня назад

can you share the link for this stl?

@ArtByAdrock 2 дня назад

@@mostafam07amed I found it on Thingiverse but resculpted it and haven’t posted it anywhere yet.

@apollolux Месяц назад

Alternate meme method to make a concrete owl using a 3D printer: 1. 3D print some circles. 2. Cast the rest of the bleeping owl. If you know, you know. ;)

@Seaofjitsu Месяц назад

Ya life works this way. The guy on youtube with a zipper face is the one that also Lives in Vegas, makes 2x4 tables, has neptune 4 printers and makes cement molds from TPU. Bwhahahahaha Im in the Lakes. Dont tell me you like Jiu Jitsu and roast coffee also. Awesome channel by the way.

@bluedot7817 21 день назад

Salt lakes? Jew jitz sue? Antisemitic? King of the jews? Jesus personified? The inquisition? Live by the sword die by the sword friend. Alex Baldwin did shoot a stage hand. Hollywood is a swamp. Nevada is a nice state. Do you podcast? How do you sublimate aggression? With punches and kicks? My belt is black but it's merely a walmart discount to keep my hipster pants up.

@bluedot7817 21 день назад

We all sublimate our aggression differently. 😹 I sublimate by going to the titanic and imploding. Digression, neat, I was looking for this process. Could PLA suffice?

@erinhysong468 Месяц назад

No views or comments or likes in 60 secs

@davey2k12 22 дня назад

I'd of used Epoxy for small casts would look much better without any extra paint work concrete looks pants less ya throw in outside 😂😂

@darrennew8211 15 дней назад

These look like things you'd put out in your garden. Nobody is going to put a hockey gnome on their fireplace mantel. :-) If you're putting it inside, just print the thing in the first place - no need to turn it into a mold to cast it in a different plastic.