Welcome to the TradesmenGarage!
For daily picture and video uploads:
Find us on Facebook: / tradesmengarage
Follow us on Instagram: / tradesmenga. .
**This video focuses on using a Cricut Maker, or vinyl cutter to create your design, as well as explains how to make a scoreboard to match the set. I DO NOT go into detail on how to make the frames or tops of the boards as that was covered in my first video linked below**
(How to Make American Flag Cornhole Boards) ((Frame and Top building process explained))
• How to Make American F...
Original Plans for the Scoreboard were found here:
rogueengineer....
*Supplies List*
1, 4x4 sheet of 1/2in plywood
4, 2x4x8 pine
3 inch wood screws
1 1/4 inch pocket hole screws
120 and 220 grit sandpaper
Wood Stain (Any color you like)
Minwax Pro Series Spar-Urethane *DISCONTINUED*
Minwax Helmsman Spar Urethane has now replaced the above
Foam brushes/Rollers
Gloves
Raggs
1.88 inch Frog Tape (Painters Tape)
4, 1/2 inch carriage bolts, 4 inches long
4, nuts
4, washers
Oracle 631 Removable Vinyl
Transfer Tape
*Tools Used*
Circular saw
Table Saw
Miter Saw
Random Orbital Sander
Dust collection system (or a shop vac)
Jig saw
Bench sander
Air Compressor and Brad Nailer
Clamps (various sizes)
Pocket Hole Jig (Mine was from Harbor Freight)
3/8 inch drill bit
1/8 inch drill bit (for pre-drilling screw holes)
1/8 inch counter-sink bit
Cordless Drill
Vice Grips
9/16 Socket
Cricut Maker (Or any vinyl cutter)
Hope you all enjoyed the video and found it helpful! Leave some comments below and let me know what you think!
This might be the last set that I make with this design, I am almost finished making the new light weight design, that video will be uploaded in the coming weeks.
So be sure to subscribe to the channel and enable notifications for when that video goes live! You can get all of my daily updates on Facebook and Instagram as listed above!
Now go do it yourself!
**Music Credits**
Some of my background music is royalty free and can be found at:
www.bensound.com/
16 сен 2024
