Cornhole | Build It | Ask This Old House

Подписаться 2,1 млн

Просмотров 152 тыс.

50% 1

In this video, This Old House general contractor Tom Silva shows host Kevin O’Connor how to build a DIY cornhole board to meet regulation standards.
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse.
Kevin O'Connor heads to the shop where general contractor Tom Silva shows him how to build regulation cornhole boards. Starting with a few pieces of kiln-dried lumber and some interior plywood, Tom shows Kevin how to cut the front, back, and sides to regulate width and length. They then attach the plywood to the base, add legs, and cover the entire project with a finish and a pretty neat decal!
Difficulty: ⅖
Time: One day to build, two days to finish
Cost: Under $100
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: www.thisoldhouse.com/pages/st...
Materials:
½-inch interior plywood [homedepot.sjv.io/m542MX]
Kiln-dried 2x4x8s [homedepot.sjv.io/4PaWVZ]
Deck screws [homedepot.sjv.io/OrYmAN]
Carriage bolts, washers, and wing nuts [homedepot.sjv.io/QyY6M3]
120-grit sandpaper [homedepot.sjv.io/k04ord]
Water-based polyurethane [homedepot.sjv.io/eKnAYO]
A custom decal (optional)
Tools:
Tape measure [homedepot.sjv.io/rQEBXy]
Pencil [homedepot.sjv.io/DKWJ3o]
Miter saw [homedepot.sjv.io/g1R46O]
Scribe tool [homedepot.sjv.io/B051yx]
Screw gun and bits [homedepot.sjv.io/R50Wna]
6-inch hole saw [homedepot.sjv.io/KjBWXA]
Jigsaw [homedepot.sjv.io/q4WBxj]
Clamps [homedepot.sjv.io/9gVrz0]
Paint brush [homedepot.sjv.io/PyzWVX]
Paint roller [homedepot.sjv.io/g1R4gO]
Foam brushes [homedepot.sjv.io/0ZG1AP]
Build It:
This Old House general contractor Tom Silva, This Old House host Kevin O’Connor, and special guests including Jimmy DiResta, take you through step-by-step DIY projects in this popular video series. From end-tables to cutting boards to wine racks to chicken coops and more, learn how to build from the best pros in the game. Segments include mention of all tools and materials needed to get the job done.
Follow This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
Cornhole | Build It | Ask This Old House
/ thisoldhouse

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@jasonrueschman1590 Год назад

This old house is amazing it's been around for so long ❤❤this show was I was on when I was a little kid I can't believe I'm still watching it

@ernestcashion4462 10 месяцев назад

Tom is really great he has a natural ability to tell you how something is done. And you know those are some good boards.

@kellydimartino6157 Год назад

Heard Tommy say “ready for some assembly “ and could hear Norm saying that in my head. I really like this series as it brings back a little NYW vibe. It’s enjoyable to watch another craftsman with hands of gold build projects again.

@Michael1M6 Год назад

It’s cool to see the crew having a little fun!

@erikgarcia6537 Год назад

The fact they played in the video.. Amazing!!!

@scpitts Год назад

This episode was a fun one to watch. I love cornhole.

@vonboldler5219 Год назад

I have some leftover birch from a recent home project, I've just been inspired!

@TheRich4187 2 месяца назад

Man...I feel like I've been watching yous my whole life. 44 years old and I can't really remember a time this show and others like New Yankee Workshop weren't around once I discovered wood working and home improvement existed. Great memories and even though the show has added a couple new faces to keep it going, I really love seeing the old familiar faces and miss those that have faded away. You are all loved and greatly appreciated. I have learned so much from you all! Take care.

@frankvaldez2769 Год назад

I love this show!

@austinwilkes8556 Год назад

Tommy is a genius!

@johnrwallace Год назад

Great episode!!!

@MoranGuyVideos Год назад

Love you guys!

@troymcclellan2842 Год назад

LOVE IT!

@CreyParkFilms Год назад

Awesome! I'd love to see an episode where you folks make a bat house!

@Freabyrd 4 месяца назад

Nicely done 👌

@bradpaulp Год назад

0:22 “so I picked up some KD 2x4 we want them nice and straight”. Now I know Home Depot sponsors them, but you know those nice and straight KDs didn’t come from there 😂😂

@feinschmegga Год назад

Nicest 2x4s I've ever seen

@reygaitan407 Год назад

Awesome

@josephkelly9532 Год назад

Can't wait to build one.

@iBringTheRain24 Год назад

I took advice at 3:31, "You gotta pump every now and then when it's slipping out." Now I have three kids.

@tonythetiger9839 Год назад

i love you guys

@carlpayne8008 Год назад

Very nice guys 😅

@Miguel.Garcia 7 месяцев назад

Actually the American Cornhole Association says the slope of the boards must be 35 degrees from 90 😂

@podcaster_emeritus Год назад

Thanks for showing us how to make this and including the part at the end where we got to see you all play and have fun. Where did you get the custom decals made? That was a cool touch.

@johnlebzelter4208 Год назад

@Podcaster Emeritus Ever think of trying to help yourself? However since they’re custom decals, I’m pretty sure they were custom designed and made for THEM; which means you can’t buy them. Was that so hard?

@podcaster_emeritus Год назад

No need to be condescending. I wasn’t asking for the decals they used genius. Try not being an a-hole sometime. It’s not that hard. Life will get better when you move out of your mom’s basement.

@tempesttube Год назад

@@johnlebzelter4208 Just because you can't buy those specific decals doesn't mean that you can't buy your own custom decals from the same place.

@johnlebzelter4208 Год назад

@@tempesttube ok Mr. Know it all. You know best.

@Golfer03 Год назад

Wonderful!

@feinschmegga Год назад

If they were "a hair over 8ft" - why did the two 4ft measurements overlap? Looks like the studs were shorter than 8ft

@pirana6 Год назад

Yeah that was odd. I think the "hair over 8 ft" was to cover for the width of the blade. The overlapping didn't make sense but like most things TOH, it was the explanation on how to do it that was supposed to be the point, not the specific case we watched.

@disco_falcon1895 Год назад

My guess is that he just misspoke and meant to say a hair under 8'.

@Shop_Simplicity Год назад

the editor sucks, the boards were over 8ft, they must have screwed up the filming and the board moved cause if you watch he pulls the tape from the same side in the closeup

@RandomVids519 Год назад

I love when you drawer Tommy😂

@dennislogan6781 Год назад

I was just recently thinking about making one of those. Great job.

@johnlebzelter4208 Год назад

Sure you were. Troll.

@johnlebzelter4208 Год назад

@@dennislogan6781 sure you were. Come to RU-vid and try to be cool. Haha

@rickwallace2091 Год назад

Here’s a tip. Use a Robinson bit and screw to eliminate all slipping

@noahklein97 Год назад

Robertson*

@waynekrause1752 11 месяцев назад

Where did you get your decal it is simple and not over bearing

@CornholeSteve Год назад

@this old house couple details would make these even better. fill the screw holes on the top first so they dont snag a bag, or better yet, attach from the backside with pocket holes. round all edges including the hole so you dont snag the bags. lastly, put a cross brace under the middle to help make the boards more solid and reduce bounce. btw, finish looked good!

@KevinCook370 Год назад

How come the legs are not angle. 90 cut on the bottom of the leg? How does that work?

@strikerz2912 Год назад

I just bought one at sams club for 99.00 official size and start playing when I got home

@chrisdean5283 8 месяцев назад

What was the final top coat used?

@KevinCook370 Год назад

Why when I cut with a six inch hole saw it tears my arms apart?

@keithsanders7974 4 месяца назад

What is the thickness of the plywood?

@bierdan82 Год назад

What watch is Kevin wearing?

@athmostafa2462 Год назад

I keep hearing about this game a lot , a corn hole 🕳️ interesting indeed , the coloured bags what's fill of I wonder???! Corns 🌽🌽 right?!

@bobby_greene Год назад

Some use corn, some use plastic beads, some use sand.

@athmostafa2462 Год назад

@@bobby_greene interesting , thanks for the feedback.👍

@davidparker7156 Год назад

don't the bottom legs need to be cut at an angle to lay flat?

@KevinCook370 Год назад

I asked the same question.

@johnnyb362 Год назад

Pro tip: add a board stretched between the legs a few inches up from and parallel with the ground. Drill a couple 3” holes in it…beverage holders!!

@watchyourbackmike Год назад

Dewalt miter saw

@Skammerd Год назад

Rich with "Did ya buy that?" 😅

@PhlegmBrulee Год назад

I am Cornholio!

@danpettis1675 Год назад

😂

@jtltet 10 месяцев назад

The bottom of the legs should be cut at a 29 degree angle.

@chrisholland8226 Год назад

Only change, use a router to round off the edges of the board and the hole. People are very particular about their $150-$300 sets of cornhole bags and those edges cause tears in bags.

@Cdshakes Год назад

For once the dimensions are given for a "Build it" project. I have never seen plans available.. so most of the build-it projects are just neat to watch.. can't actually build them.

@Aaron-nj4ou Год назад

The plans are in TOH magazine.

@Cdshakes Год назад

@@Aaron-nj4ou really? They give the plans for all of the Build-it projects??

@TKomoski Год назад

As long as yall are thier Thanks

@johnlebzelter4208 Год назад

@T Komoski “THERE.” You can thank me later.

@berrytrenzy Год назад

Making money is an action. Keeping money is behavior. Growing money is knowledge..

@grumpyoldjeff Год назад

Expert Brian Nelson never seems to surprise me 😄 i also trade with him, his strategies are top notch and i don't joke with him.

@aejbkahn437 Год назад

when you have a good skill, it is normal that you can go global and your name is recommended to so many people and from what i've heard about Mr. Brian Nelson, his strategies must be really good .

@grumpyoldjeff Год назад

He's on TELE GRAM 👈🏿 with the username below.....

@grumpyoldjeff Год назад

@Briancnelson66

@MrManMuff Год назад

RU-vid's 2 unskippable commercials in a row are really making me more selective about what I watch.

@491Mystic Год назад

Whatever happened to horse shoes.

@lottiekenney636 Год назад

What is the average cost to replace a small area of Hardie fiber cement sheets on your house?? NOT whole house, just a ball park cost to do the job. Thanks!!😮😮

@stevendavanna Год назад

First comment ❤ I do love tommy. He’s such an inspiration

@johnlebzelter4208 Год назад

@Steve Davanna Would you like a participation trophy??

@stevendavanna Год назад

@@johnlebzelter4208 that would be brilliant mate, thank you 🫶🏼

@johnlebzelter4208 Год назад

@@stevendavanna shut up. It’s called “sarcasm.” Look it up!!! Goof.

@stevendavanna Год назад

@@johnlebzelter4208 if you know so much about “sarcasm” you’ll know I was being sarcastic “Goof”

@protectanimals9792 Год назад

Do you guys know what cornholing means ? 😄

@gregorywhite4748 13 дней назад

Concrete jungle

@msm624 4 месяца назад

They should've watched a video about pro boards before making these campground boards.

@albertorkenbjorken Год назад

watch your cornholes!

@scotttovey Год назад

Hey! Who won the game?

@christopherjones9487 Год назад

Never shows where to put the holes on the legs, and never shows what angle to cut the legs at. 😮

@rickwallace2091 Год назад

I can’t stop giggling when I hear the word cornhole.🙄

@djamelhamdia134 Год назад

"American Cornhole Association."

@AR-cp5dz Год назад

The ACA

@matohota Год назад

What on earth did I just watch...

@jeffreyrichardson Год назад

brian fitts daughter danielles gift harry potter plumbers wiped solder

@Formaldehydex Год назад

It is as if all the reactionary homophobes and transphobes don’t know the definition of “cornhole”.

@jimmyt55 7 месяцев назад

Not very impressed with this one. I would check out other builds. It’s simplistic, and close the regulations, but needs better joinery. No one screws the top on from the top…..ssssshhh

@riskybiscuit5594 Год назад

I never thought I would see the day that this old house would resprt to building corn hole boards for content.

@MrLightdark22 Год назад

Nothing wrong with this type of content, its a cool and interesting project.

@rickfromthecape3135 Год назад

Nothing wrong with a fun project for a home DIY'er.

@johnlebzelter4208 Год назад

@Risky Biscuit I never thought I’d see the day that a person couldn’t spell “resort” correctly. 😂

@rickwallace2091 Год назад

I never thought I would see the day that someone couldn’t watch an instructional video and keep their mouth shut if it doesn’t interest them specifically