I must disagree with you about printing on an Inkjet. I had very good results with printing on my HP Inkjet printer. I used the Experts Choice decal sheets for inkjets and my results were near perfect. I felt I didn't need the added expense of buying a new printer and took my chances with my inkjet. I am happy to say that my decals came out very nicely. This makes it easier for me to decal up my SpaceX model rockets that were 3D printed and gives me flexibility when I need a new decal.
Instead of running the same sheet through multiple times, cut it into smaller pieces. I cut A4 into 4pcs of A6, which is the smallest our printer can handle. Awesome videos!
InkJet is okay, you just need to have a high DPI image and when you print, print as photo - it takes a bit longer to print. Print multiple copies across the page, that way you can choose a good set. Also print from the bottom up, as some printers will jam if the cut out catches inside the printer. I find cutting off the entire width helps in the long run. The only problem is the paper gets shorter and the printer will become confused about the paper size (just feed a normal piece of paper through afterwards). Also, I find sticking the decal sheet down to a normal piece of paper to help if it gets below A5 size ... However I have not tried this, but you could arrange your print runs to fit an A5 size
@@zoltan-8233 I would suggest - as the video does in fairness - print on plain paper first. Use the highest resolution you can - it's that which matters not the make and mode of printer - and if you're happy with that then try a decal sheet. [Looking at your printer's specification online it seems to print to a pretty good resolution.]
If you export your decal as an svg, you can use svgnest to optimize how many decals you can fit per sheet. Rather than running a sheet through a paper a bunch of times, you might want to nest the design and print a whole sheet.
The title is “how to make decals at home”. Actually, you’re making them at the office with the laser printer. I call that false advertising! 3 Pinocchio’s!
They make white decal paper. You either have to cut out all of the white surrounding the image, or try to match the color of the model , and use that as the background color.
You can buy white decal paper though obviously if your decal needs seethrough parts, that wont work. The White paper shows the colours much stronger too. Depends on your design as to which you use
@@jamescameron-clarke2560 "Cal? Cal, I'm stuck! AAAAAH!!!" "Industry! Science and technology! Big men, putting screwdrivers into things. Turning them, and adjusting them!" Seriously one of my favorite MST3K movies.
I got some white backed paper from a Chinese company for mugs it’s good for terrane as it thicker then most decal paper and you can stretch it an it cracks giving a cool weathered look
You get what you pay for. A good quality inkjet printer should easily be capable of this, provided of course the original image is a good quality /high/ resolution one and you print at a similarly /high/ resolution. As the saying goes 'You can't make a silk purse out of a sow's ear' so if the image or the output is low resolution you'll get rubbish no matter how good the printer is. Note also the video is 2018 and American, so quoted prices won't be accurate. Tip. Print to file outputs the image to PDF and keeps the same size. Then print the PDF and see if you're happy with the size and colour.
Great video! I've always wanted to make decals for my Bretonnians and High Elves, but have never followed through with it. Now I've got something to consider. Thank you! :)
Haha. My exact thought. He says that and picks a games workshop logo and I was all “nope. Now you are demonetized, sued, and your children are going to community college instead of Ivy League.”
I've used my InkJet with Testor's Decal Film and Bonder. I agree, the results will be much much better using a laser printer. My decals came out just fine for what I was using them for, but for something like the "Moon Patrol" logo I don't think my setup would've produced adequate results. When using inkjet and the spray bonder, just slay down a few thin coats allowing each coat to dry completely. It dries fast enough. That will keep the ink from bleeding.
I just picked up Testors decal paper #9203T AND a $40. HP OfficeJet 5212 Printer . I am asuming I dont need my computer connected for what I want to do but Im completely new to this so I may be wrong. For now I just want to scan a business card,print it then use that to re-copy till I have the size I need . Im hoping thats all there is to it ?
What I do is first print on a regular piece of paper. Then I cut decal paper and tape it over the print and then send it back through the printer. That way I'm not heating up the decal paper over and over. Also not risking a jam that ruins the whole sheet.
Thanks for sharing your technique. I was thinking about trying the same thing. I wonder if a laser cutter could be used to cut the decal out from the decal sheet. If this is possible, imagine all the possibilities.
The only way I can do elaborate banners on fantasy miniatures. I'm gong to give it a go. The decal printer sheets for lasers are expensive. I bought clear paper laser decal and white paper laser decal. I don't want to waste a single inch of the paper either so I'm going to try and fit everything I can on there and test with standard paper before hand.
I have used ink jet for years and it works great for me. Color is even great. clear as a bell. I do use a photo printer though. I also have used chart-pack letters or numbers on decal paper. I also use decal bonder from testors. works great. so does the flat/gloss coat. You can also get white decal paper sheets from BMF. I have a few left. Yeah micro sol is good shit. Good video...thanks for sharing...
I have to say I enjoyed the video and you have some great models there! nice work. I will tell you that your probably not helping testors out...perhaps it is not the product but rather your methods. Why not try using a spray fixative on the print FIRST after you have printed it. Let that set and dry. Then you can apply the decal however you want and use the micro sol or other finish coat last. I image that will work out much better for you.
Hi, very helpful video. Question for you: do you need to cut around the perimeter of the decal design, or does the decal slide off naturally when wet? Thanks!
I need some advice. I'm printing my own waterslide decals on ink jet. When I tried applying the decal to a black background it practically disappeared. Is there fix for getting decals to show up on a dark surface, printer setting etc.?
That cab looks incredible! Are you planning on doing a video for it? I'm honestly really confused how Testors stays in business. I've tried a variety of their products and always found them to be "meh" while also being more expensive than alternatives. I guess they just have brand recognition?
Thank you for this video. Question: Have you played with painting the model white in the area you will place the decal printed on clear backed decal sheet? Comment: I've never used a printer for decals (although I am looking forward to trying), but while making Paper Models printed from an Inkjet, I had inquired to HP if the make a more durable ink. They said they did (misremembering the product name), it was called something along the lines of Premium Photo Ink. The HP rep assured me it can be used on any paper, but the product description mentioned 'for use with HP premium photo paper.' I did not order the product. But I am commenting to suggest that various inkjet inks, may explain varying decal results.
what settings do you use for the laser printer cause i keep getting a paper jam every time i use Bare metal Foils laser white decal paper in my laser printer.
@Doctor Faust's Painting Clinic Hey! Thanks for the video! Liked and Subscribed! One question though, how do you know for sure if the decal will fit the model? For instance, if you were doing a car in a particular scale. You found a decal that aligns perfectly with the car door. You wanted to print it so that it would align perfectly with the scale you are working with. How would you resize it like that? Or is it just trial and error and a LOT of wastage?!
There are printer that can print white. You need a cmyw printer, and while you probably haven't one at home, a copy shop could very well have cmyw printer and might be able to do the print out for you. Oki Pro 8432WT is a model with a white toner, for example.
The ink tank system appears to be much better than the cartridge system ru-vid.comUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 and a lot cheaper to run. The machine was easy to set up. A small point but I thought they'd be a USB cable included to help with the set up but there was none. I've been using it now for a few weeks and it seems like a good product and superior to my previous printers which were all troublesome HP machines.
Used testors print paper. Its wayyyy too thick. You can see the edges and It lifts around the edges like there is no adhesive. Has anybody else had negative results with testers and had better results with another brand ?
I don't think the Testor's products are widely available in the UK - can anyone out there suggest alternative bonding agents? Would just a few airbrushed coats of vallejo mat varnish do the job?
I would be interested in knowing what time had transpired between making the decal, and when you applied it. This could very well effects the application of the Set/Sol, because of the "green" nature of the ink, and the lacquer applied to the decal, and why it was effected so drastically by the Sol. Laquers have a few of the ingredient contained in Sol which allow the paint to flow, and bind to the surface, if these have not cured fully or else dried out, then the Sol could be absorbed in a flash right into the decal, and severely weaken its composition.
well goood to know i got some havent try it got look at it but i hare you ues wax peper and do yhah old ones but haven try that to haven had big kits to need decails and do lot with pens to well will see and as go that to
Is that the “Space Sheriff” Comando Cody rocket? Made by Herb Deek? Is it still available for purchase anywhere? Would love to buy it but can’t find it. Thanks
@@smackbottom53 Liquid latex for masking. I don't remember the brand. Any will do. I like the Humbrol Maskol, but you can get liquid latex from any craft store.
is because normal printers rely on the color of the paper (white) to achive white tones, since normal printers doesnt have white ink, the decal paper is transparent film, not white.
No. It just leaves the areas where you don't print white instead of clear. GW and the like have very expensive professional printers that can print white.