How to make deep dish wheels for diecast cars - DIY Tutorial 

Glad you liked it!

Glad you liked it!

Glad you enjoyed it!

Thanks for watching!

Glad you like it!

Thank you!

Thanks.

Thanks! 😃

Glad you like it!

Thanks. 🙂

Thanks and welcome

Thanks!

Thanks for visiting

I subbed too..

Thanks

They are 13 mm in diameter. For some cars they are big, for some are good. I wanted to show procedure of making wheels, for smaller wheels you can use smaller tube and vice versa.

Thank you. I hope things will be better in future. Subs always come slower in the beginning. Channel exists 7 years but I started upload this type of content only 7 months ago.

Gracias.

Thank you. I'm glad you like how I did it.

Thanks for the visit

Thank you 👍

You can buy it on Ebay or Aliexpress. It cost around 2-3 USD. Search for "aluminum fishing rod holder"

@@WhattoRepair thanks!! 1: 64 scale?

Inner diameter is 10.85 milimeters and outer diameter is 11.2 mm.

I'm not sure what link you need? I mentioned every material that I used but I didn't buy any of that online. For this video I found all in my local stores: fishing rod stand, heat shrink tubes... Those are common tools and materials and you can find it in most of hardware stores. Also, it's not so practical to put links in youtube video, because links for certain things in online shops can change after short time and I would have to check links in my videos every day. I always write names of tools and materials and that is most important. When you know names you can easy find something.

It's Molotow Liquid Chrome paint marker. You can see here, I made a review ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kpbiXjtY2pI.html I bought marker on Ebay.

Sorry for my late answer. When you start to customise diecast cars or start any modeling hobby, you need to look objects around you with "different eyes". You will find materials everywhere around you. There is no place where you can buy everything you need. I find stuff in various type of stores, online, on flea markets, around my house, in garden or park... Those aluminium tubes are fishing rod stands, I found them in local chinese store, but you can buy them on ebay, amazon or aliexpress or you can search something similar. Heat-shrink tubes are also from local store with electronic equipment, they are used for electric wire insulating. Scotch brite - from local paint store. Tell me what else you want to know. It was hardest to find aluminium tubes that match wheel radius. In fact, I was walking beside them in store almost every day, but I didn't noticed them until one day.

@@WhattoRepair thank you so much I also want to know the step by step because I watch tutorials but the never really explain it

Yes, you can use rubber pen grip if size is correct and if you like how it looks. I have a plan to make another video about making custom off road wheels with rubber pen grip.

You are not late, people will always make wheels and there is always somebody who is a beginner. I used heat shrink for tires. Heat shrink is tube that shrinks when exposed to heat. It starts to shrink on temperature around 90°C or 194°F. It's mostly used to protect cables and wires. You put piece of heat shrink tube over the damaged part of the cable, or over the cable without insulation, then expose heat shrink tube to heat source, heat gun or simple lighter. After that heat shrink tube will form pretty strong insulation. So try to search heat shrink tubes in some hardware store, or store with electric materials, electric instalations for homes, electronic stores etc. I don't know where you live, you can probably find it online, bit its very cheap, cheaper than shipping, so I think its better to buy it in some local store.

@@WhattoRepair thanks friend

I'm showing how I cut excessive material here at 8:43 I was using scalpel. Maybe you didn't pay attention.

Yeah thanks alot❤

Thank you very much.

MVN GVH 3 2021 2022

🙏20TT

💙💚💙💚💙

🇿🇦💰🚚

That depends for which model you are using wheels. This is only principe how to make wheels. If you want to make it smaller, use smaller pipe and smaller wheels.

@@WhattoRepair oh, ok

My friend, this is hobby, people are customising cars because they enjoy doing this. Nobody is looking is some work worth doing it, people are doing this because they love making something. Wheels are not so big, they are medium size, there are bigger stock wheels. Even if they are too big for some cars, this is only example how to do this. If you want smaller wheels, then use smaller wheels and smaller tube. If you want bigger wheels use bigger materials. It depends what you want to do. Nothing in this video is grinded on trucks, but there isn't anything bad if you grind or cut something to fit your needs. And you can lower a car, you can even make it higher, make suspension or pretty much everything you can imagine, depends on your inspiration. And depends are you looking this as a hobby or some profitable job so you must calculate is something worth to spend time on.