No video :(

how to make herringbone for your guitar

Подписаться 14 тыс.

Просмотров 55 тыс.

50% 1

In this video I explain how to make the herringbone for a classical guitar.
To build your own classical guitar in your own workshop using my step by step 40 hour plus video course series visit:
onlineguitarma...
If you are interested in building a guitar in my workshop in Spain all the information that you will need about the 4 week course is available at:
guitarmakingcou...

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@mikeyutube 4 года назад

That sanding technique with the veneer spacers is gold. Thank you.

@raytristani 7 лет назад

I have done quite a few of these and yet, I keep watching your video. It is just wonderful. Thank you for sharing this!

@kthwkr 6 лет назад

You have removed the mystery of how herringbone is made. Before now it just seemed like magic. Beautiful work. I have a greater appreciation of the binding and rosettes on my guitar.

@robertbdesmond 7 лет назад

Titebond II dries yellow. Never had any issues with the color of the glue when it dries. If you glue things up well and precisely, you will never see a glue line. If Torres had Titebond, he would have used it! I also use hot hide glue, epoxies, cold hide glue, fish glue, white glue and super glued. All for different tasks. I'm not opposed to modern glues. I'm not a hide glue purist.b it has it's place. Titebond II can take the bending heat. Don't over cook it when bending what you have glued up. Don't try to bend more than 3 glued up veneers. It won't usually work.

@raytristani 3 года назад

You can actually bend the herringbone with veneers on both sides. All you need to do is make a circle channel that is a little smaller than the diameter you’ll need in a piece of MDF. Heat the herringbone with a heat gun lightly and work the herringbone into the channel. It will bend without an issue. That’s how I’ve been doing it for years.

@barrywhaley5317 7 лет назад

Thank You Pablo.....A lot of luthiers dont share knowledge

@00vTv00 2 месяца назад

Loving these videos, thank you for your knowledge and sharing, it is huge.

@matthewsutton5532 8 лет назад

Thanks for all your videos, you are the best at explaining the important things.

@danstiverson 3 года назад

So glad to know how this is done. I will try it for myself.

@alvarotoledonascimento2397 3 года назад

Hello my friend! Fantastic work!! I will make one herringbone using ABS plastic and glue with acetone, but the process is similar. My project is for a irregular stamp. Thanks for share your knowledge!! Sorry for my english.....

@aze216 6 лет назад

Thanks very much for sharing this. Can't wait to try it out. Also - great tip on getting the thickness correct with the tape and the block!

@emcc127 4 года назад

Bravo 👏 👏 👏 I love everything about this video

@pauloraboni 3 года назад

Obrigado! Video muito bem feito, mostra todos os detalhes da construção. Agora ficou fácil, realmente. O truque da plaina em 9 graus para a emenda é de tirar o chapéu.

@stefanmuller4952 6 лет назад

It is a pleasure for me to watch your videoinstructions. Its amazing to see your really perfect work.lts a pitty that you are so far away from Germany. Thanks a lot.

@rodparker4514 3 года назад

Terrific Sir

@interminatussolar9823 5 лет назад

Fantastic video, thank you! I like your style of explanations and how you point out important details.

@gustavoaponte1121 9 месяцев назад

cuando miro sus videos, mas me hace extrañar al maestro Ricardo Louzao, que l si sabia explicar.

@rinaldofaria 7 лет назад

So huge and excellent explanation. Thanks a lot, Pablo.

@elbrevas 8 лет назад

Muchas gracias por compartir esto Pablo. Tu forma de trabajar es espectacular, se aprende mucho. Thanks for sharing your wisdom, it's amazing. Sergio Valverde.

@redkitekk 8 лет назад

Gracias Sergio, a ti tampoco se te da mal!

@meiros 8 лет назад

Very good! Congrats! I will try this in my number two guitar.

@marioamayaflamenco 6 лет назад

Great videos and instruction. Very generous of you. Thank you.

@18roselover 8 лет назад

thanks pablo I cut mine at 45 deg for headstock and center rib inlays, back , rosette etc. different angles seem to create a different look .Have also done 13 deg,

@stephenwhite9534 4 года назад

Really great video, I now feel I can attempt this myself, thanks.

@petervanrensburg4171 6 лет назад

Thank you very much for the demonstration, much appreciated

@michelpernod4000 7 лет назад

Thank you so much Pablo ! great videos, very clear and helpfull !

@Sailing_SY_Melody 3 года назад

Thank You for the great recommendations...

@danstiverson 3 года назад

Excellent! Thank you.

@petervanrooij2181 8 лет назад

Thank you very much for sharing this valuable information.

@FriendM2010 2 года назад

Fascinating. Need the patience of Jobe. 🤭 Skill & Artistry. 👍. Inspiring. 👍

@JeanPierreDesbiens 2 года назад

c’est très difficile de trouver de l’information sur la manière de construire les herringbones. Je vous remercie énormément pour vos explications claires et précises.

@user-cb1vo1ik4b 5 лет назад

excellent explanation, to the point...,thank you

@lifewithasong 4 года назад

These videos are wonderful!

@redkitekk 4 года назад

Greg Robinson thank you. If you like my videos please have a look at www.onlineguitarmakingcourse.com

@deus_ex_machina6307 3 года назад

very helpful !!!

@Mr.Nabil.Belhaj 7 лет назад

beautiful rosette :) such an art .

@robinskitube 7 лет назад

Very well explained and very informative, thankyou .......

@jeffthompson1696 8 лет назад

Thank you so much, this is like. Gold!!!

@gloverp3 5 лет назад

Great video Pablo… quick question what watch is that you are wearing it looks super cool

@redkitekk 5 лет назад

It is a watch I got years ago as a gift from a friend so I don't know where he bought it, in the Watch itself it says POLICE

@riccardomoni3598 3 года назад

It would be necessary you do video how you build the block for obtain herringbone

@Sergio.GonzalezPrats 3 года назад

Brutal, me ha encantado

@purplepaisano5408 7 лет назад

Great information -- Thank you!

@redkitekk 7 лет назад

You are welcome!

@robertbdesmond 8 лет назад

Excellent.

@frankdeblieck7478 7 лет назад

Great video thanks

@troutfishinggermany9186 Год назад

Is it possible to use hide glue for this work, or will it fall apart wenn you heat it for bending? Great video, many thanks for sharing your thoughts and experience!

@redkitekk Год назад

Yes, if you use hide glue it is more likely that things will come unstuck. If you really want to use hide glue you will have to make sure that you don’t apply too much heat when bending the strips.

@troutfishinggermany9186 Год назад

@@redkitekk many thanks Pablo, i will try to make some test pieces!

@troutfishinggermany9186 Год назад

Does it matter if you cut the veneer crosswise to the grain or lengthwise? Or does it make sense to alternate grain orientation for more strength as in plywood?

@thewolf3530 2 года назад

👍👍👍Sir I just wondering is that color green automatic comes from the tree or you color stain

@walterrider9600 8 лет назад

thank you kind sir

@DavidMiller-kc8qs 4 года назад

Pablo have you been able to put together a complete set of videos with dimensions for building a classical guitar? I'm very interested in building a classical guitar with your method of building classical guitars. I am very interested in purchasing the video series from you. I'm looking forward to hear from you. David E Miller

@redkitekk 4 года назад

Hi David, I am still working on that, I am hoping that it will be available before the end of the year.

@DavidMiller-kc8qs 4 года назад

@@redkitekk Thanks, please let me know when you have them ready to purchase.

@MirekSadowski 7 лет назад

Thank you so much, this movie helped me so much :)

@redkitekk 7 лет назад

You are welcome! I am pleased you found it useful.

@riccardocimarosti 6 лет назад

Thank you, really!!!!!

@nhandutimusic 5 лет назад

gracias por compartir!

@redkitekk 5 лет назад

nhandutimusic, de nada.

@martinhonow1096 6 лет назад

amazing

@gilbertflores6763 7 лет назад

Fantastico !

@redkitekk 7 лет назад

Gracias!! me alegro de que te guste!!

@rinaldofaria 7 лет назад

Pablo, could you tell me if you use any software to draw the rosettes and purflings? And, if you use, which software do you use?

@redkitekk 7 лет назад

Hi Rinaldo, I have never used any software to design my rosettes, so I don't really know what to recommend.

@vesakuokkanen6611 4 года назад

Thanks for very helpful video. A question: Any advice to making a herringbone from two pieces, where the heads of the arrows from each halfcircle meet at the centerline of top.

@redkitekk 4 года назад

Vesa Kuokkanen this is too complicated to explain in a few lines. I will make a video about it soon.

@vesakuokkanen6611 4 года назад

@@redkitekk Looking foward to it.

@riccardomoni3598 3 года назад

Sorry...I have not understood how can you make the block...how is it composed

@BQBBBQ 7 лет назад

thanks for your video. I made my blank. sliced it diagonally. glued it back together and sliced off some slabs. here is my problem: the green and white bars in the slab are not parallel. they are sort of wavy. if that description makes sense. where did I go wrong?

@redkitekk 7 лет назад

Hi Bob, This is quite normal.If you cry on with the process to the point in which you have a piece as long as you need then cut it in to strips and glue together adjacent strips, then all the green and white will line up correctly. once you cut the strips it doest really matter that the coloured lines are wavy while it is still a block. I hope it make sense. Pablo

@hankpikuni7024 2 года назад

LOL 5:26 looked like you had a fancy hairdo.

@meiros 6 лет назад

Hi Pablo how do you make the 0.3 mm veneer? I just found in the market 0.5 veneer. Thanks in advance!

@redkitekk 6 лет назад

Hi Ricardo, I buy it from a supplier in the UK called David Dyke, his website is www.luthierssupplies.co.uk

@felixoquebec 8 лет назад

thanks a lot, very nice technique! what glue are you using???

@redkitekk 8 лет назад

+Félix Cesar Augusto I am using Titebond, but you could also do it with animal glue.

@felixoquebec 8 лет назад

+PabloRequena and you dont have any problem when bending it, somtimes with titebond it unglued...

@redkitekk 8 лет назад

+Félix Cesar Augusto Of course you have to be careful and don't overheat it, bent it a little and let it rest to then carry on when it is cold.

@robertbdesmond 8 лет назад

+Félix Cesar Augusto I would suggest to Felix that he uses Titebond II, which is water resistant. I have been using that for any glued up veneers that will eventually get heated and bent. It never separates. Titebond II is the best glue for any glued up veneers which will eventually be bent on a hot iron or in a side bending machine. I've been using that glue for over 25 years with much success. I only use Titebond II for gluing up purfling stock and herringbone, dots, chains and the rest for rosette making. Anything that will eventually be bent on a hot iron or in a bending machine. Good luck.

@BQBBBQ 7 лет назад

robertbdesmond titebond II dries brown. does this cause any issues?

@demarsouthard3620 4 года назад

I like these videos. Great instruction. But Mr Requena learned English from a Brit. Some nice American should teach him how to pronounce the "oh" sound. (This, from an admittedly anal-retentive English teacher with a touch of irreverence. I wish I could speak Spanish half as well as he speaks British.) But in all seriousness, these are great videos. Mr. Requena shows and explains as well as can be done in a video. I hope someday to be able to take one of his classes.

@ukphonebook 4 года назад

DeMar Southard There’s no such language as ‘British’. Equally, there’s no such thing as a ‘British’ accent. There are many English accents as there are Scottish, Welch and Irish. Is there a generic ‘American’ accent? Only in the minds of non-Americans surely...