This video will show you How to Resurface Concrete Steps with Newcrete Concrete Resurfacer product. If you have an old concrete slab or concrete steps, chances are that it looks old, cracked, and worn out. Fortunately, concrete resurfacing products such as Newcrete make it easy to give old concrete a fresh, new look.
To resurface concrete or concrete steps with Newcrete, you will need the following tools and materials 🛠🧰:
- Concrete resurfacing product: www.ctscement.com/product/new...
- Concrete Broom: amzn.to/3TWCseh
- Concrete Finishing Trowel: amzn.to/3i6bHai
- Drill with Mixer Attachment: amzn.to/3EtTYRD
- Sponges (optional): amzn.to/3UgZYmJ
- Concrete dye (optional): amzn.to/3VgF2wO
To resurface concrete or concrete steps with Newcrete, you will want to follow these general steps:
1. Clean the Existing Concrete Surface.
Before you can resurface concrete, you need to ensure that the existing concrete surface is clean. A “clean” concrete surface is one that is free of any dirt, debris, paint.
2. Select the Right Concrete Resurfacing Product for Your Application.
I recommend the Rapid Set Newcrete Product.
3. Mix up the Concrete Resurfacing Product According to the Manufacturer’s Recommendations.
Typically, concrete resurfacing product will be a “pancake batter” consistency once it is mixed up.
4. Moisten the Existing Concrete Surface Prior to Application of the Resurfacing Product.
Before you apply the mixed up concrete resurfacing product, it is recommened that you moisten the existing concrete surface.
5. Apply the Concrete Resurfacing Concrete to the Application Area.
To apply the concrete resurfacing product to your existing concrete, it is recommended that you dump out small amounts of the product and the spread it out evenly with a hand trowel.
6. Apply texture to the concrete surface using a “Broom Finish”.
After applying the concrete resurfacing product to your existing concrete and smoothing it out evenly with a hand trowel, it is generally recommended that you apply a “broom finish” to the concrete surface.
A broom finish provides an aesthetic textured surface that hides any imperfections in the concrete.
7. Allow the Concrete Resurfacing Product to Fully Cure.
After applying your concrete resurfacing product and applying a broom finish (if desired), simply allow the concrete resurfacing product to cure according to the manufacturer’s recommendations. Typically, these products cure rapidly and are ready for foot traffic in as little as 2-4 hours.
8. Apply a Concrete Sealer (if desired).
Although a concrete sealer is not required, it can provide a few notable benefits such as:
- A sealer will help to prevent staining of the concrete surface and will help to prevent water discoloration.
- A sealer can “tint” the surface of the concrete - giving it a darker look.
To apply sealer to concrete, I recommend that you roll the product onto the concrete surface using a foam roller. However, you can also apply sealer using a sprayer.
-----
For even more detailed information on resurfacing concrete, check out my Blog Linked Here: atimprovements.com/how-to-res...
Be sure to subscribe and hit the notification bell so you don't miss any future videos that are part of the Basement Renovation Series!
Follow me on Instagram: / atimprovements
Check out my Blog: Atimprovements.com
Subscribe to my RU-vid Channel ⬇️ ru-vid.com...
Check out my Website for additional DIY Content: atimprovements.com
▬▬▬▬▬▬▬▬▬▬▬▬▬
🎥 MY RU-vid GEAR
Camera (Iphone Max): amzn.to/3d5HxSo
Microphone (Maono Condenser Mic): amzn.to/3RCAb7N
Tripod: amzn.to/3Rz5Gj3
Mini Tripod: amzn.to/3Rvt2WM
Lighting: amzn.to/3d4QdZ5
▬▬▬▬▬▬▬▬▬▬▬▬▬
🛠🧰 TOOLS THAT I USE
Carbide Tipped Drill Bit: amzn.to/3S0hdIM
Tapcon Screws: amzn.to/3OxEWxh
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Circular Saw: amzn.to/3BFotC4
Masonry Drill: amzn.to/36yP1JW
Level: amzn.to/3HowUDn
Hammer: amzn.to/35fIpiT
Chalk Line: amzn.to/3MwSDg8
Clamps: amzn.to/3HLqwpK
Drill: amzn.to/3JICKkk
Sawzall: amzn.to/3HcdeSI
Circular Saw: amzn.to/3BFotC4
Jig saw: amzn.to/3I6lcyd
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Roofing Nailer: amzn.to/3BEAuYF
Orbital Sander: amzn.to/34UwlUD
Bar Clamps: amzn.to/3JjFrJe
▬▬▬▬▬▬▬▬▬▬▬▬▬
Thank you so much for watching!
*All content on the Andrew Thron Improvements RU-vid channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
1 дек 2022
