The sole purpose of building this RC airboat is that I need a rescue boat for my RC seaplane. Just in
case the seaplane has malfunctioned in the middle of the lake or failed take off or crash on landing, I could rescue it with RC airboat and bring back to the shore. The airboat plans is quite simple but still
looking scale. The material is also depron foam 5mm the same material I use for building RC plane. The
model is modeled from the real airboat, it is an 18 foot Sportsman from 1000 Islands Airboats from
Wisconsin, USA. It's trully a scale model but like semi scale, because I simplify the parts for easier build.
DONATE : Paypal Juliusperdana@yahoo.co.id
SUBSCRIBE and Like to support this channel
#airboat #rcboat #rcairboat #rcdepron #rcfoam #buildvideo
Playlist :
04:05 Plans Preparation
05:29 Hull
09:28 Cabin
13:46 Motor Mounting
15:22 Rudders
18:49 Detail and Decals
23:26 Maiden Voyage
35:08 Review and Next Project?
You can download the plans on the link below :
A4 Plans : paper-replika....
A0 Plans : paper-replika....
A3 Decal : paper-replika....
Build instructions :
paper-replika....
DONATE via Paypal : Juliusperdana@yahoo.co.id
Specs :
1. Hull length 700 mm
Electronics
- Any Motor with 8 inch prop
- Tested with Turnigy DST 1200kv
- Propeller : 8x5x4
- ESC 20A
- Battery Lipo 2S 5200mah
- 1 plastic gear 9 gram servo amzn.to/2X5GdXH
Materials :
1. 5 mm Depron/ Polyfoam
2. 7 mm Plywood
3. Hot glue, CA glue
4. 2.5 mm wire
5. Oracal 65i vinyl sticker / packing tape
6. 0.3 mm Mica plastic
21 сен 2024
