How to make Rechargeable 1.5v Li-Ion battery | DIY Rechargeable 1.5v battery at home

Подписаться 276 тыс.

Просмотров 7 млн

50% 1

In this video I show how to turn a non-rechargeable 1.5V battery into a rechargeable lithium battery at home and charge it with an adapter
To make this rechargeable battery, we use a 3.7 volt lithium battery and bring it to 1.5 volts using a reducing regulator.
To charge the 3.7V battery, we use the charging module, but due to its inappropriate size, we have to remove it from the board and change it to smaller dimensions.
How to make Rechargeable 1.5v Li-Ion battery | DIY Rechargeable 1.5v battery at home
---------------------------------
Datasheet file link:
drive.google.com/file/d/1h0Ko...
---------------------------------
List of tools and parts:
drive.google.com/file/d/1hNTn...
---------------------------------
about this video :
rechargeable 1.5V battery
Rechargeable 1.5v Li-Ion battery
How to make Rechargeable 1.5v
DIY Rechargeable battry
---------------------------------
#Penguin #PenguinDIY #homade #howtomake #DIY #1.5vLi-Ion Rechargeable#

Опубликовано:

11 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,3 тыс.

@nomore-constipation 2 года назад

I used to solder under a microscope (for rocket parts and other stuff 😉). This lads soldering steadiness is above average. Not many people can have such a steady hand. The technique is flawless. Kudos on the ingenuity too!

@hiddenguy67 Год назад

lol

@ahmadrandhawa238 Год назад

1:15 What actually happens there??

@vladimiryakovlev9373 7 месяцев назад

Это в твоей стране считается мастерством пайки? Какой позор!

@Stefan_Dahn 6 месяцев назад

@@vladimiryakovlev9373Nachuj suka blad fashist okupanty! 🔥💥

@derpyturtle927 2 года назад

I'd just go to the store and buy a pack of 4 rechargeable batteries but this is a really cool project keep up the great work

@takeyourheart114 2 года назад

Lazy

@derpyturtle927 2 года назад

@@takeyourheart114 earning the money to buy the thing isn't being lazy. I just don't see the point of only being able to charge 1 battery at a time.

@TheArachnoBot 2 года назад

@@takeyourheart114 this battery's capacity is tiny. It's a cool project sure but it sure as hell isnt practical. Better off buying a commercial solution.

@Syncrotron9001 2 года назад

@@TheArachnoBot next video "I installed a USB port in the gas cap of my car to charge my car along with my iphone."

@mash7062 2 года назад

@@takeyourheart114 what??

@bradley9856 2 года назад

The most impressive thing is how well you condensed the charging circuit, well done

@bridoc519 2 года назад

I would love to see a video dedicated to how that was done. Very impressive

@ahmadrandhawa238 Год назад

1:15 What actually happens there??

@bradley9856 Год назад

@@ahmadrandhawa238 he just soldered all the SMD components together without a circuit board, to make it super tiny

@ahmadrandhawa238 Год назад

o thanks

@Dante-420 3 месяца назад

Yeah that was pretty badass

@repairstudio4940 Год назад

That's a lot of work just for something like that and you sir have done the most EPIC and splendid job 👏 doing it. Hats off to all the time and effort that went into making this video. Wow! Subbed!

@user-so9ri5bx4n 2 года назад

Далеко от розетки не отходи! Lm317 как и любой стабилизатор потребляет гораздо больше, чем часы. И хорошо, если автор заменил резистор ограничения тока на tp4056 на соответствующий аккумулятору. И если в аккумуляторе есть плата защиты. А вообще молодец в части миниатюризации.

@mamedovich562 2 года назад

дороговато для одного акума , чтобы спрятать его в часах

@Luca-hx1im 2 года назад

Welcome to another episode of diy pro. Today, we will be transforming a battery into an indoor campfire. Lets get to it

@FedeG86 Год назад

You made my night with your comment. Thank you. 🤣👍

@Luca-hx1im Год назад

@@FedeG86 I hope you followed the instructions carefully, otherwise you will be cold tonight :)

@DarrenHughes-Hybrid 2 года назад

I respect your soldering skills. They are impressive!

@reviewsjustcuz1437 Год назад

One of the cooler videos I've seen so far in electronics. I dunno how you can manage to keep your hand that steady. Good stuff.

@philfrydman2576 5 месяцев назад

Keep your mind cool and steady, buy an NiMH battery it works better and last 5x longer

@ProteinFromTheSea 2 года назад

the deadbugged charging circuit looked a bit tight for my comfort, but it turned out fine. incredible soldering skills there.

@lucasc5622 2 года назад

just get boards ordered ffs lmao

@lincolnschoolpreservation3574 2 года назад

yeah, thats what i thought, n after all that they dont last forever 3 years n doing it again, but great soldering for sure.

@seekhimwithallyourheartand3358 2 года назад

Repent to Jesus Christ “Search me, God, and know my heart; test me and know my anxious thoughts. See if there is any offensive way in me, and lead me in the way everlasting.” ‭‭Psalms‬ ‭139:23-24‬ ‭NIV‬‬ K

@lucasc5622 2 года назад

@@seekhimwithallyourheartand3358 it's nice that you're religious but I dont care and don't try to convert me

@lincolnschoolpreservation3574 2 года назад

@@seekhimwithallyourheartand3358 what r you talking about? Did u forget ur medications.

@Thtguymoe 2 года назад

Very cool! That takes patience and a steady hand. Very impressed!

@farshidfarajgoli5867 Год назад

وقتی ادم سلیقه داشته باشه نتیجه عالی میشه .درود بر شما🌹🌹🌹🌹

@PenguinDIY Год назад

ممنون

@34gw68 Год назад

Omg how is this possible???? This RU-vidr have amazing talent Those tiny parts soldering and clean looking...wow

@gort5583 2 года назад

That is an amazing project, but not easy! Definitely inspiring and challenging!

@Malik_MKhan 2 года назад

There was a lot to talk about like using a voltage regulator , high voltage to low conversion so it can provide amps for a longer period. But for me the best part was how compact every thing was, I have some experience with electronic components and I know how difficult it is to combine them in such a tiny space. Good Work Keep it up.

@vittorionizza3898 2 года назад

Grazie 7hbb

@mangjay80 2 года назад

Kiale

@user-pk7cz5yf2d 2 года назад

اقا منصور هم وطنیم؟

@soundspark 2 года назад

Problem is when you use a linear regulator instead of switchmode you are burning the difference between the input and output voltages.

@seekhimwithallyourheartand3358 2 года назад

@rubenhayastan4854 6 месяцев назад

Есть готовые решения и готовые модули . Но ваша увелирная работа -искусство . Честно ,мало у кого есть столько терпения ,чтоб столько возиться с микроскопическими компонентами .

@lucaslage1037 7 месяцев назад

Impressionante! seu conhecimento é digno de orgulho.

@lordfly88 2 года назад

I'm not sure this is overly practical, but I love the meticulous attention to detail! Excellent work!

@ericolens3 2 года назад

It is... especially if it scaled up. Thing is... idk why Duracel, energizer nor Rayovc makes Lithium batteries. (Maybe they do and I'm just mistaken. Cuz I mainly buy Energizer AA and AAA rechargeable batteries)

@lordfly88 2 года назад

@@ericolens3 I only meant not practical because a typical AA battery has a capacity of about 2500mAh, and this one has 180mAh. If you could scale that up somehow and still fit it within the casing, then sure.

@TurbatusTheFurious 2 года назад

It's really not. however putting the circuit inside of the device itself would allow for a larger battery and the proper protection circuits, and that would be extremely practical.

@johnconnor555 2 года назад

Amazing work, so patient and meticulous !!! And the thumbnail wasn't clickbait 👍👍👍👌👌👌

@not-fedrayepps5203 6 месяцев назад

This music bring me back to the old days, like a sailor looking at the horizon remembering when he first step foot on the mighty sea, except it’s me remembering the early days of RU-vid. Lol

@phantomrider5652 2 года назад

It might be a little dangerous but I'm impressed at how skilled you are

@Inventor101 2 года назад

Wow such fine work👏

@khorshedalam9095 2 года назад

I subscribed you

@ROHITYT833 2 года назад

I love you

@sinisastojiljkovic14 2 года назад

@@khorshedalam9095 nema prevod na srpskom ?

@herminehoffmann5580 2 года назад

Hello inventor 101

@professional.hacker. 2 года назад

Hello Inventor 101

@SlavTiger 2 года назад

Finally someone who does the extra effort and documents everything, shows step by step and makes something actually interesting and functional using their own solder work and circuit design. 11/10 You have earned my respect as a hobbyist electronics engineer and a sub. You have done more than 99% of youtube electronics videos I have ever seen. Please continue making great things no matter the effort required. I love your attention to detail and it shows in the end results.

@wille69 2 года назад

this is cool but why would you charge one battery instead of charging four battery's at once?

@Haunted_Hunter 2 года назад

@@wille69 Because it's a Durasmell. The smell that lasts.

@vlad-rr6eh Год назад

Mă Bădăranii cu canalul tău

@red2965 2 года назад

I totally agree with other's on how tight a tolerance it is to cram all that technology in such a small space. Proper tools make all the difference in the world.

@danojpro 2 года назад

Most people do not understand the satisfaction differences betwen buying and making. This is really cool man. I love it.

@DFX2KX 2 года назад

you can buy these batteries online. But it's neat to see all the stuff they have to have stuffed into them. Didn't expect someone to be able to DIY one.

@PunakiviAddikti 2 года назад

This is a cool project, but there are some practical issues. The capacity of the lithium battery is low, so you're not going to get as much energy out of the battery as you would from a regular battery. The LM317 is a linear voltage regulator. It converts the excess energy into heat and has a terrible efficiency. A buck converter is better suited for this type of task, but it puts out dirty DC. Shrinking the charging circuit is *dangerous* if you aren't careful. One mistake and it could malfunction and put the lithium battery into a dangerous state. Lithium batteries are no joke, if they become angry they turn thermonuclear. Consider a slimmer charging circuit and a USB breakout connector instead. I know how hard it is to make electronics fit into a tiny space.

@badtothebonefanrock1250 Год назад

Try a resistor in line for ground

@My.OC.Is.Complicated 9 месяцев назад

🤓

@PunakiviAddikti 9 месяцев назад

@@My.OC.Is.Complicated Nerds rule the world today.

@radiomixx12345 2 года назад

Ingenious. You work very carefully. I really like the quality of the solders. Your LM317 controller is great but it stays permanently connected to the battery and of course has a low consumption that will quickly drain the battery. Success in several projects.

@UGRA0 4 месяца назад

You are just genius. The ink on plastic to mark a spot is amazing

@chomp54321 2 года назад

Interesting exercise. Certainly cool as a maker project. However, aside from the questionable handling of the electrolyte, the end results seems not worth the effort. First of all a regular alkaline AA battery is probably good for 1500 mAh, and a NiMH rechargeable AA is easily 2500 mAh and up. The 180 mAh lithium ion battery is really measly in comparison. I also wonder if there is any heat issue when you have to squeeze the voltage from 3V+ to 1.5V. My criticism/doubt aside, I applaud your efforts.

@jorgevega8141 2 года назад

Trabajo en electrónica y concuerdo contigo el amperaje final es pobre ... cómo para un control remoto ...

@reahs4815 2 года назад

you have to look at the Wh not mAh when comparing different battery voltages/chemestry but I agree that the small Li-ion pack he used is small because he cannot fill the battery space as efficiently as you can when the battery and shell is designed for each other.

@greggeshelman 2 года назад

He put a pair of the 180 mAh batteries in so its 360 mAh. Pitiful beside the commercially manufactured versions of these batteries which typically have around 1500 mAh capacity and up to 3000 for the versions that use a separate, special, charger. Can't just pop them into any old NiCd/NiMH charger.

@jimbartosevich498 2 года назад

So, to make a battery, you hollow out a battery, put another battery inside, along with some electronics, and then need to scavenge parts from a third battery

@edstar83 2 года назад

The battery he hollowed would of ended up in landfill

@CreeplayEU 2 года назад

+ you must count the amount of work and time to do it too. It's just pointless to do it and waste your money for like 200mAh which is nothing compared to average 1 dollar battery that can easily store 1500 - 2000mAh which is like 10 times more for 10 times less money

@gavinbrennan2536 2 года назад

Looks straight forward enough, going to give it a go.

@MnemonicHack 2 года назад

Cute idea, but here's a cray bit of knowledge: You can actually buy rechargable batteries that fit four to a charger, and get four charged batteries at a time instead of just one.

@fintansky9369 2 года назад

No way! That’s crazy! I did not know that!

@TrueNomadSkies 2 года назад

good luck finding ones that are actually the proper voltage. Also, this video is hella interesting even if not the most practical everyday thing. It shows step by step how some of the high tech things we have in today's world can be put together in the real world that most of us rarely think about, let alone visualize.

@butsukete1806 2 года назад

The pack I got came with a 4 micro USB connector adapter, so best of both.

@marcpledger 2 года назад

The first kid to copy your monkey level safety standard is going to lose some fingers.

@lemondownthestreet1013 2 года назад

More accurate title: how to explode your entire kitchen

@bparker86 Год назад

Wow I'm so glad I clicked on this. Your production quality is top shelf. Great work my friend

@user-ql1sm8dr1y 2 года назад

Можно ведь было измерить сопротивление на переменнике и заменить его на миниатюрный, аналогичный СМД резистор. Работа 👍

@user-se2bk4nf1n Год назад

Немного кустарный монтаж .. можно все разместить на одной плате .. ещё можно на одну плату параллельно насобирать полтора вольтовые аккумуляторы .. и заряжать от мощного зарядника .. будет больше ампер на выходе ..

@casualcoffeeshooter 2 года назад

180Mah? Totally not worth it, but the precision and accuracy are admirable. Great job anyway!

@grey2126 2 года назад

180 * 2

@MrHannatas 2 года назад

180*2 and that was at 3.7v i think it would be a bit more at 1.5v

@fernando_gotze 9 месяцев назад

Man you're a son of your mother! Congrats 👏 👏 👏 👏 👏

@mradford10 2 года назад

I wish all batteries were like this… incredible that it’s possible but not done by the industry. Great job 👍

@Marko_Maxa 2 года назад

Those 1.2V batteries are worthless. it's better 1.5V batteries for charging, but they are forbidden. it's called corporate fascism.

@joenasty4395 2 года назад

Ummmmm have you never heard of rechargeable batteries. The last time I hade to buy AA was 4 years ago. You should look into them.

@tomate3908 2 года назад

@@Marko_Maxa lol

@mradford10 2 года назад

@@joenasty4395 What I meant by ‘like this’ was rechargeable using a single port… not requiring an additional bit of hardware.

@mradford10 2 года назад

@@ButterfatFarms Fair point. But like all things, options are ok. I don’t use a lot of batteries, however in the case of just needing to recharge a single battery for a low usage item, this looks like it would be a valid solution where an additional charger wouldn’t be required.

@davidefogagnolo 2 года назад

the linear regulator is going to waste 50-75% of the energy going out of the lithium cell, using a switching converter would have been a much smarter move

@wil-fri 2 года назад

aguante PWM, nothing else matters

@LazySpaceRaptor 2 года назад

Share some knowledge please? I'm interested in having more than one option for my voltage.

@davidefogagnolo 2 года назад

@@LazySpaceRaptor just search for buck converter ICs, the low power ones include everything inside the IC itself, they are either fixed voltage or adjustable via external resistors

@mangjay80 2 года назад

Wow

@effedrien 2 года назад

You would still need an external capacitor. And equipment that uses batteries, typically does not expect a noisy power source. So you really need enough capacity.

@boredr724 2 года назад

All is great, but in that way there is no low voltage protection. Congrats for the work.

@joemann7971 2 года назад

I can't remember what the cut off voltage is for that voltage regulator but it will basically shut off before the lithium batteries gets completely drained. Low voltage protection would really only be needed if it was connected directly to the lithium battery but its not, and the regulator will stop outputting any power before it drains the better too much.

@brunoarg5832 2 года назад

I liked the edition you made in the micro components of the charger, they are very nice haha

@nicolasparadis1407 4 месяца назад

(Whistling sound) 😮 🎵 THAT, is an awesome solder!!!! 😂😂😂😂😂

@IncompleteGaming11 2 года назад

seriously this was awesome,no one would have thought of doing so,great sense of mind you have,hope your such videos would grow and your channel would become super famous

@PenguinDIY 2 года назад

Thank you for the encouragement.

@IncompleteGaming11 2 года назад

@@PenguinDIY Welcome

@rimbang_ 2 года назад

nitip jejak

@thefree9516 2 года назад

You know they sell this things i bet that's where he got the idea

@mangjay80 2 года назад

How are you

@younhitchborn 2 года назад

I can appreciate the craftsmanship that went into creating these. I just wonder if there is any real benefit to these. I also had a hard time getting past how annoying the music was.

@sebastienmonette6659 2 года назад

Fairly certain there's no benefits, seeing the battery circuit bodged together made me cringe, having parts as close as this is asking for parts to overheat.

@cali-co6428 2 года назад

Craftmanship lmao

@sideshaft3083 2 года назад

New caption: “how to potentially burn down your house!”

@minnuss 2 года назад

People, this is what you call a positively insane human 👍

@warp.routine 2 года назад

Very cool. These are commercially available but seeing how the engineering works is interesting.

@mattz6113 2 года назад

Its already exist on Amazon

@ammaralsulaimani8325 2 года назад

I have never seen something like that absolutely amazing work 👏

@sachinbhan9448 2 года назад

Sir...🙏 You are absolutely GENIUS in his work.👌😘👌😘

@ddawsonwilsondawg7967 2 года назад

Dude, messing with those small parts is one thing AND THEN THE STOP MOTION STARTED 😱

@TheParamotorGuy 2 года назад

This is a great idea. I would love to see this mass produced. Except for the LM317 voltage regulator. That is such a huge waste of energy.

@lukasz_p_ 2 года назад

Only sensible option would be to use switch mode regulator instead of LDO, but such solution is more bulky (especially inductor). At this moment more than 50% of energy is simply dissipated as a heat.

@aepfelpfluecker 2 года назад

I think you can already buy batteries like these on amazon and stuff

@TheArachnoBot 2 года назад

Batteries exactly like this already exist and have existed for quite a while. Except they have more capacity.

@NathanCroucher 2 года назад

Impressive solder skills along with the patience required to do this.

@ale6242 Год назад

Pretty nice! I'd be concerned with it having no low voltage cutoff on the lithium cell though

@kenanelicanov2327 2 года назад

Poor conditions are showing how we are genius.😊 Great work. Thank you for video.

@kitchenbriks3685 2 года назад

Don't ever do this! You could really get hurt depending on the battery chemistry

@_azureAutumn 2 года назад

plus it could explode: sending sharpnels all over, plus not using gloves bothered me a LOT

@TurbatusTheFurious 2 года назад

The most likely injury to happen when disassembling an alkaline battery is that you slip and cut yourself. Unless you're working in an oven or surrounded by exposed circuitry. at most you have the potential of some skin irritation due to the chemistry and I would imagine that's only going to happen from prolonged exposure or if you have sensitive skin. It's mostly safe. Just an absolutely inane modification.

@JeffBourke 2 года назад

Even the way he was holding the scalpel was bad!

@shadowtheimpure 2 года назад

@@_azureAutumn Explosions are only a risk if you're dismantling a lithium battery. Alkaline and regular batteries are nowhere near that volatile.

@tomweickmann6414 2 года назад

I agree. This Penguin dude is an irresponsible d-bag putting out videos that some hayseed might think is useful when they are poisoning themselves. Leave batteries alone you diy fools.

@guptajiexperiment 2 года назад

Wow you have a great knowledge and finishing as well as 🤟 Keep it up bro ⭐⭐⭐

@delta3eight 2 года назад

Very cool. I’ll add this to my list of things I’ll never be able to create 😀

@Andre_Thomasson 2 года назад

At first i thought this was just some more clickbait but no way you blew me away!!!

@vinayk.d.3889 2 года назад

Very complicated bro....😮👍 Nice video...👍

@tatabyebye 2 года назад

I was scrolling on youtube i came across this video.. this is awesome i can understand how difficult it went, to fit all those parts in such small space It seems like your new channel so best of luck for future👍

@PenguinDIY 2 года назад

Thanks

@HelloHello-hk4sx 2 года назад

I learned my lesson on not messing with batteries. Shocked myself. 😅

@nsmini9991 2 года назад

Passando aqui pra deixa aquele like 👍 vc é muito inteligente

@ynahit3746 2 года назад

You pushed the limits. A valuable video. Congratulations.

@PenguinDIY 2 года назад

Thanks

@gousmc1983 2 года назад

Insurance agent: "sir it seems your house caught on fire from a small alarm clock battery. Any idea how that could have started?" People who have watched this video: " Well, you see. .... Have you heard of RU-vid?"

@AK-rf1ip 2 года назад

cool!! i love it! I hope the future of this thing will be sold like normal appliances. It's small and easy to use and harmless.

@sleepyshortsx 2 года назад

Instructions unclear, I accidentally created a car battery

@iammustafa777 2 года назад

Amazing build. Such precision. You ought to be a surgeon with such steady hands. Thanks for sharing this with us.

@PenguinDIY 2 года назад

I do not have the spirit of being a surgeon.😄 Glad you enjoyed watching the video.

@mangjay80 2 года назад

Kef halek

@eveningtweaker7765 2 года назад

instead of potenciometer you could have used normal resistor or two since its role is only to tell regulator how much voltage to output and not much current goes through it

@mangjay80 2 года назад

How are you

@jonathanfairchild 2 года назад

He did this so he can fine tune the output.

@Ezio470 2 года назад

@@jonathanfairchild once tuned he could measure the resistance across the POT and replace it with the equivalent resistor.

@eveningtweaker7765 2 года назад

@@jonathanfairchild i know but after finetuning you measure potentiometer and replace it with resistor :)

@satibel 2 года назад

@@Ezio470 you can also just calculate it, it's a simple ratio.

@mahmoodrezajarandei5839 12 дней назад

استاد واقعا کارت درسته! 👌

@ekon01cz 2 года назад

I have never seen in my life better way, how to set house on fire. Awesome!

@justman7656 2 года назад

Man, your hands is pure clock mechanism, all is accurate and wow, how compact it and good compounded It's really awesome how you assemble it all together But there's one point, capacity of that system is near 360 mAh, when in worst salt AA battery is near 500 mAh, so actually needed some other designs about accumulator choice

@PenguinDIY 2 года назад

360 mAh is defined for 3.7 V output. In this project, the output is 1.5 volts, which is calculated as 888 mA.

@ozrenbalic6051 2 года назад

@@PenguinDIY it said 180 mAh on the battery. Were you using two cells?

@justman7656 2 года назад

@@PenguinDIY Good point, that wasn't taken by me But isn't your ac-ac just emitting most amount of lowered energy in heat, so basically it between 360 and 888 mAh And thank you, it made me think about capacity convertation, so that was useful (And sorry for my English)

@RexxSchneider 2 года назад

@@PenguinDIY What do you mean, "calculated as 888mA"? That doesn't make sense. Did you mean you think you can get 888mAh out of a 360mAh Li-ion battery by running it through a linear regulator? If so, you're not understanding how energy is lost in a linear regulator.

@BMXXXorcist 2 года назад

Skills. Props. The attention to detail. Wow. But 180mAh?.. That'll power my TV remote for like a day. Still, very cool.

@podcastunfasslich 2 года назад

Wow! Was für eine Mühe dahinter steckt. Aber wahnsinnig gut gemacht 👍 😊

@rjlinnovations1516 2 года назад

Very creative. I liked your excellent ideas 👍

@filipe4133 2 года назад

DIY my @ss! Totally professional work! I may never be able to do it myself. Awesome job dude! I got speechless with the attention to detail. Many cheers!

@billnoname8093 2 года назад

yeah, I kinda figured he or she is in the electronics field, more than likely

@liruichen 2 года назад

Whoa man! You add lightning effects and metal locking SFX to the stopmotion and you got yourself a certified series pilot on your hands! Great animation!

@trinydiaz Год назад

Genial, soldar todo sin una PCB, enserio si se soldar a esa complejidad, muy fácil de hacer en casa.

@gudangmainanku Год назад

The art of assembling an extraordinary electronic circuit, amazing 👍👍

@matiut2 2 года назад

Why don't you use SMPS as voltage regulator rather than linear regulator? I saw some of these with really small main boards and great current source capabilities. It would extend lifetime of such battery. Nice project, good job.

@mdi-vo7oc 2 года назад

Best thumbnail Best video Everything is grate But please 🥺 change fonts I am addicted to your creativity.

@PenguinDIY 2 года назад

Thank you for your kindness and attention to detail😘

@Eselkay1989 Год назад

Miniaturization at its best. Kudos dude!

@amirhosseingsm 2 года назад

کارت واقعا عالیه عاشق خلاقیتت شدم

@PenguinDIY 2 года назад

مرسی داداش

@grillpig3860 2 года назад

That's kinda dangerous and bungled, but still very impressive. How long does this battery last inside the clock you showed in the video?

@epsilonadept7301 2 года назад

Hearted comment but no answer xD

@green_claw2830 2 года назад

@@epsilonadept7301 probly stil measuring

@WASTEOFTIMESTUDIOS 2 года назад

@@epsilonadept7301 they ❤️ all of them, probably low english comprehension and just click instead of read.

@krtek2O2 2 года назад

the battery discharges the stabilizer faster than the alarm clock , in principle it has a large transverse current

@grillpig3860 2 года назад

@@sharadkumar8353 probably XD

@TheDhylton1 2 года назад

I can 100% guarantee that cost more than an entire pack of rechargeable batteries. BTW, how did you dispose of the original battery contents?

@2869may 2 года назад

Ok....No more questions.....lol

@peha524 2 года назад

No way, this is from Great Britain. More possible India, Pakistan or Indonesia. Waste???... just throw it in the sea. If you can't see it, it's not there.....😖

@whiteguy5019 Год назад

You my friend are a soldering ninja!

@armanh1149 6 месяцев назад

اینا الکترونیک نیست هنره.واقعا لذت بردم و وقتی متوجه شدم ایرانی هستین شوکه شدم. واقعا دست مریزاد

@niteshsu1775 2 года назад

Wow, awesome I know how difficult it's to solder smd components. But really loved your work.. 👍🏽 My first ever RU-vid comment.

@PenguinDIY 2 года назад

thank you

@mangjay80 2 года назад

Thank u

@akhtarhusain4390 2 года назад

Wonderful Video I like The Way You Arrange All the Components in a AA Battery. In Future Video I suggest you while charging the li-ion or li-po battery adjust the CHARGING CURRENT this will enhance the battery health performance.(For example Battery has 450mAh So Charge with 450mA or less) AND TP4056 HAS A ADJUSTABLE CHARGING CURRENT BY CHANGING (R2) RESISTOR.

@PenguinDIY 2 года назад

Thank you for your attention The offer is useful and interesting.

@aliarash6169 2 года назад

ای بنازمت مغز متفکر به عشق ❤❤❤IRAN❤❤❤

@PenguinDIY 2 года назад

مرسی داداش

@user-uc7je8cy5r Год назад

Очень круто. Руки растут из правильного места. Лайк и подписка!

@terramir 2 года назад

really cool fine work, but totally pointless energy wise, an Nimh battery will provide between 2-3Wh of energy is will provide 240mWh of energy and about 300+ mWh of waste heat. But even so if a thing takes 2 AA batteries it usually will run off one li-ion without reduction of voltage. because 2 AA can provide 3.4V when completly fresh as long as you have a circuit to cut off discharge at like 3V to 2.5V it will be fine (depends on cell).

@lukasoffen2420 2 года назад

Well very nice project and absolutely amazing how you managed to fit everything inside an AA-Battery. But without over discharge protection your battery will die fast. And the capacity is not that high but enough for low energy consuming devices. NiMH Eneloop Batteries have 2000mAh and yours only has 540mAh (compared to NiMH because they only have 1/3 of the voltage)

@TheArachnoBot 2 года назад

The battery in this project is only 180 mah

@lukasoffen2420 2 года назад

@@TheArachnoBot Yeah but it has 3.6V while NiMH only has 1.2V So you have to to multiply it by 3 to compare them

@TheArachnoBot 2 года назад

@@lukasoffen2420 Nope. That would be the case for a switching regulator but this has a linear regulator which just converts the extra voltage to heat.

@Seeker6192 2 года назад

This mans hands are so steady.. almost no tremor or shake.. surgeon hands

@user-ht4en2ys9j Год назад

This video is about how to make a 1.5 battery from a 3.7 battery ? Great idea! Now it would be even better to make a battery for a wristwatch from a car battery - it would be cool in general...

@LosHerederosDeOdin 2 года назад

Eres un Einstein, goliat de las ideas, steven Hawking de los positivo y negativo, ingeniero, prodigio, bruce wayne, cerebro colosal, crack, genio, idiolo. Gran trabajo y buen video.

@paulohvitorino 2 года назад

Fácil de fazer 😜

@Tuna83521 7 месяцев назад

This DIY project is literally fire!

@waynec369 2 года назад

After dealing with so many leaking batteries with the Duracell name on the side I will most definitely NOT waste time doing this. Duraleaks will NEVER be in my hands ever again.