How To Make Useful Rechargeable 1.5v Li-Ion battery | DIY Rechargeable 1.5v battery at home

Подписаться 42 тыс.

Просмотров 24 тыс.

50% 1

In this video I show how to turn a non-rechargeable 1.5V battery into a rechargeable lithium battery at home and charge it with an adapter or USB Port it is amazing that I charge my mouse battery by the laptop and use it again.
To make this rechargeable battery, we use a 3.7-volt lithium battery and bring it to 1.5 volts using a reducing regulator.
To charge the 3.7V battery, we use the charging module, but due to its inappropriate size, we have to remove it from the board and change it to smaller dimensions.
At the end by using typical USB connector made it suitable to connect to Lab top USB port and any USB adaptor. if you like, you can use a type C connector for your device compatibility.
how to make Useful Rechargeable 1.5v Li-Ion battery |DIY Rechargeable 1.5v battery at home
#Innova #Innovadiy#DIY #1.5vLi-Ion Rechargeable#
---------------------------------
about this video :
rechargeable 1.5V battery
Rechargeable 1.5v Li-Ion battery
How to make Rechargeable 1.5v
DIY Rechargeable battry
--------------
Music from freetousemusic...
Track: Feels Like by Eric Lund
• 🧭 Fun Adventure Beat N...

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии

@InnovaDIY Год назад

Thanks for watching 😉😉😉 Subscribe to my channel if you like❤

@KillerkoUK Год назад

You should include some USB storage capacity as well.. so you can reinstall your windows from your mouse battery if needed :D

@InnovaDIY Год назад

nice :D

@gautamyadav10 Месяц назад

Lol

@gmarracchi Год назад

What is the point of all that work to get a 200mAh when we can easily buy a 1350 mAh or more and recharge it with a cheap charger?

@_______________6104 10 месяцев назад

if you wanna practice soldering ¯\_(ツ)_/¯

@MrIC01 8 месяцев назад

plz do not charge tiny lipo with 1 amp of current. dont follow the circuit blindly plz understand it first before moving on to making stuff.

@danielnyman6082 10 месяцев назад

Very impressive to fit the entire charging module on the side of the usb port. Did you use the original 1.1k resistor that sets the charging current to 1A? That small lipo cell should only be charged with 200 mA so you should have used around 7k resistor

@adamscarsandstuff4969 Год назад

Could you make a list of the thing in this video on Amazon maybe?

@InnovaDIY Год назад

Thanks a lot, I will do that but i need time for this.

@TheBlackadder-Edmund Год назад

All the item descriptions you need are on the video, if you cannot find them, then I would not suggest you unsolder and resolder a TP4046 circuit...

@kiritops944 Год назад

how's positive (+) polarity of the battery connect when used as a normal battery? coz i didn't see any wire?

@InnovaDIY Год назад

thanks for your comment, In this type of battery, the negative terminal is connected to the overall body of the battery, while the positive terminal is isolated. We transfer the negative charge to the bottom of the battery using a wire, and we connect the positive charge to the body using a spring. When you place the cut part back in its place, the positive charge enters your circuits.

@kiritops944 Год назад

@@InnovaDIY nice explained, i get it now 😍

@Zimbob2424 2 дня назад

nice, don't pay much attention to the negative posts. so many people are so afraid to do anything , but like to criticize those of us who do things. I've learned to ignore them. I like this battery idea. I need 12 volt though

@makgun Год назад

How do you use cover of USB port as polar side of battery when you covered? Does it touches the USB port itself?

@ericklein5097 Год назад

thats what I don't get. I doubt this works

@majid8505 Год назад

Where can find Diagram of soldering?

@lezbriddon 9 месяцев назад

Bad design. No protection from over discharge

@skillmake Год назад

رو تامنیلش کار کنی وایراله

@InnovaDIY Год назад

سلام ممنون سهیل جان

@jorgealves4875 Год назад

Você não me vende uma dessas?

@MYRiNUS Год назад

5:05 лучше бы раствора 600-го намешал. из цемента с песком. И USB нужно было с двух сторон устанавливать. так ещё практичнее стало бы. плюс микро одну сбоку. тип С можно. Пространство можно на вредоносном преобразователе сэкономить. и вместо акб 3.7V поставить пуговку на 1.5V. перезаряжаемую желательно. Наверняка автономность. минимум. сохранится.

@InnovaDIY Год назад

Thank you for taking the time to share your ideas! I appreciate your input.

@MYRiNUS Год назад

@@InnovaDIY Ой. да ладно. но это далеко не самый лучший мой проект (идея). к тому же в нём упущены важные детали. Надеюсь именно этот вклад. не будет повторён на производстве. в первоначальном его виде. Спасибо!

@skillmake Год назад

غالی بود

@InnovaDIY Год назад

دمت گرم

@prins12 Год назад

Great video, smart idea 🤗 Can you show the charging circuit diagram❤❤❤

@InnovaDIY Год назад

hello friend, diffidently But you can see all detail in below: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wBzO2YOtnBQ.html

@stevebabiak6997 Год назад

@@InnovaDIY - charging circuit diagram never appears during this video.

@thomasbauer2489 Год назад

Where can i find the circuit diagramm? Undervoltageprotection for the LiPo?

@ram.sharma957 Год назад

Which is plus poin and negative points of battery now?

@Forrest_O. 8 месяцев назад

This is a really dangerous idea. Please don't try this at home unless you know what you're doing and the battery is fully discharged.

@TheLichOne Год назад

Linear voltage regulator. Pathetic

@InnovaDIY Год назад

Thanks for your attention, I used LDO (Low Dropout) because it is easy for everyone. Please share your idea.

@林天才-t9k 7 месяцев назад

Nice

@InnovaDIY 5 месяцев назад

Thanks

@oh_no66 Год назад

diWhy

@krimisim Год назад

DiWhy

@InnovaDIY Год назад

Thanks for your attention

@muddassirsheeraz Год назад

Awesome

@InnovaDIY Год назад

Thanks

@minecraftnoob4273 Год назад

Fake he did not put the light in the one that he made out of plastic at the end

@InnovaDIY Год назад

No, It is not FAKE, It took a long time from me to get it working properly. Please, watch the video with more attention.

@stevebabiak6997 Год назад

The plastic strip at the end is used to insulate the metal battery housing from the USB connector

@Rodrigo-ks6oc Год назад

@@InnovaDIY oH nO, iT tOoK sO lOnG fOr Me To MaKe A bOmB

@minecraftnoob4273 Год назад

@@Rodrigo-ks6oc I know the light was not added I. It is a very explosive bomb that's my guy

@TheBlackadder-Edmund Год назад

@@stevebabiak6997 Ah ok, blue cable to the base (-) of the 1.5 battery case, the body of the "battery" is connected to the 1.5V output (via the orange cable) and the insolation at the top is needed to not cause a short with the encasement of the USB connector which is (-) - correct?