How to Make Stickers with Silhouette Cameo 4 | Etsy Sticker Tutorial | DIY Stickers | Print & Cut 

So happy to help - enjoy your crafting!!

Great to hear! So happy to help, let me know if you have any questions!

The Cameo 4 does not have a printing function. You will need to have a printer either connected to your computer or you will need a networked printer to use, the Silhouette Cameo does not do the actual printing. Your printer will print off a sheet with your printable file and some registration marks. Notice that the gray hatch marks are not printed.

@@onehunderdfold Thank you very much for your answer. I used a separate printer, nd after printing my design out I used the plotter to cut it out ;)

Thanks!

Happy to share the knowledge!

You can cut pretty much any material on the Cameo4, but it does not print - that has to happen externally

Thanks! The printer is the HP Envy 6055 (amzn.to/3CCqnnI). I haven't used a film like that before, but the Cameo would definitely be able to cut it! You would have to test out the right cut settings, but I would think it would be similar to a thinner vinyl.

Thank you! I got it from amazon: amzn.to/3peTZze

Thanks! I use the HP Envy 6055 printer - amzn.to/3CCqnnI When using the Oraguard laminate, they are durable against an occasional splash, but not recommended for outdoor use.

Thank you! Oraguard is a type of adhesive laminate, which is used to add an extra layer of durability and thickness to the stickers. I like to use a matte finish, but there are also gloss versions as well. I have tried a variety of other laminates, and have found that Oraguard 215 to be the best quality!

@@FreestyleTravelShop thank you ! ☺️

Yes they are!

I use the HP Envy 6055e printer, which I have been using for my business for years - highly recommend especially with the HP Instant Ink service.

Best of luck! I use the weatherproof sticker paper from online labels: amzn.to/2N4pgI3

The nesting tool is only available on the upgraded versions of the Design Studio (so you may not have it). If you do, it would be on the right side and looks like two hands locked together

They are pretty durable, however if they are exposed to water the ink could run. I don't recommend putting them outside or on cars. The only way they can be fully waterproof is if you are using an industrial UV printer (or getting them from a business that does).

If you make stickers at home, they will never be 100% waterproof (because of inkjet or laser printers), but adding a laminate can help against little splashes here and there. It also can prevent ink scratches and increases durability. I also like that it gives a nice, thicker finish and makes it a more quality sticker!

It comes down to the pressure that you're using - it takes some practice to get the hang of it! But use a lot less than what you think you need

No worries! If you have the borders already added in your sticker, then cut along that border. I didn't have the borders included in my png files so I had to add it in Silhouette Studio.

I love it! Inkjet is the best way to go because the ink is less expensive than laser toner, but you can still get great quality! I actually just uploaded this video about my printer: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uia7nM13xzw.html

Oooohh I just learnt this! For the first file, use 'Open'. For every file that you want to add after that, use 'Merge'. Hope that helps. 😍

The cameo (and other cutting machines like cricut) does not print - just a big fancy cutter. You will need to print anything separately

I use the HP Envy 6055 printer, and its the only one I have ever used! (amzn.to/3CCqnnI) You don't need anything fancy or expensive, as long as you are using the best print quality. I haven't seen any issues with fading unless you keep the sticker in full sunlight every day. I don't have a ton of experience with laser printing, but I know that I can still get bold and crisp prints with inkjet!

Not a dumb question! In theory, the vinyl is a much more durable option as opposed to sticker paper, and better for outdoor use. However, if you are making stickers from home, most of the time people are using inkjet or laser printers. This ink is not waterproof, so adding lamination on top of the ink gives a more durable sticker - but still not totally waterproof. If you were to print on the vinyl, the ink still can smear. The printable vinyl is the way to go for commercial UV printers, but not really worth it for home use. After testing various vinyls, sticker papers, and lamination, I have come to the conclusion that the weatherproof sticker paper from Online Labels and Oraguard 215 laminate create the best sticker that you can make from non-commercial grade materials (at least in my opinion). Hope this helps!

@@FreestyleTravelShop Thank you so much for answering my questions! Because of your video, I ended up getting the HP 6055 and absolutely love it. Thank you again!

Are you using the auto blade or an adjustable blade? If you're using an adjustable blade (or premium), you would have to manually adjust the cut depth on the blade itself - if you didn't, it could definitely cut through your mat.

I use the HP Envy 6055 - I've been using it for years and love it! amzn.to/3CCqnnI

No worries! I recommend getting the 8.5"x11" sheets from Creative Craft Vinyl - creativecraftvinyl.com/shop/printable-vinyl/oracal-uv-laminating-film-oraguard-215/

As far as the sounds it makes, yeah, sounds like the son of R2D2--and all my searches have shown this to be the norm.

No, you do not have to! The sticker can be complete without it, I just use it because it adds a nice thick durability to it.

When printing, make sure that it's in best quality color mode. You may have to change this in printing settings or manually every time you print

I just have the base level machine which is the 12" and is perfectly suitable for all of my sticker needs! Most people that have the larger units are using it for vinyl signs where they would need a large surface area.

You probably need a new blade by now.

Absolutely! I had the Cricut Maker first and switched to the Cameo. Since then, I have not had to calibrate once (I don't think they event have a calibrate feature) and all cuts have come out perfect. The only thing is that the Silhouette Design Studio software has a decent learning curve, but once you get the hang of it makes so much sense!

The cameo only cuts, you will need a separate printer

I print the stickers (using a regular printer) onto a sticker sheet (regular paper with peel off backing) and then put it on the cutting mat and use the cameo to cut. The cameo (and all other cutting machines) do not print.

The nesting tool is only available if you purchase the business edition of silhouette studio - it can work for any machine! It's a one time purchase of $89

Just say, “no calibration needed”

Compare it to something he's really into an puts money into that you don't quite understand why. You have to have the right tool for the job or the job while it can still be done takes way to much work/effort to complete. But, if you had a cameo it could get done in a fraction of the time and effort. Saving you stress, exhaustion, as well as physical pain from the un-needed amount of work from using the wrong tool.

Tell him people hype it like iPhones when in reality the galaxy is better but instead it’s cutting machines.

@@victoriavillarreal282 my cricut cuts great with less messing and so many materials - almost always fist time on the default setting! Both brands have positives and negatives.

You don’t need to! I can produce so quickly on a cricut and the cut settings are great! Also the print then cut area has now been enlarged

I use the Hp Envy 6055 printer and I love it! amzn.to/3CCqnnI

Unfortunately the silhouette does not print it - it prints from your separate inkjet or laser printer. But you don’t have to do anything different than hitting print!

In the video description, I have included a link that has a list of all the cut settings I use!

Yes!

Not at all - all that matters is the material you’re printing on!

Amazon! amzn.to/3peTZze

The only thing that might help is downloading a previous version of Design Studio - at least 3-4 versions back. Do all of your work in the new version, save, and then open the same file in the older version and print. For some reason, this fixes a lot of odd problems - it might fix yours!

I have the HP Envy 6055 printer, but as long as you can get good quality you can use any printer

On procreate for iPad!

This was printed from my printer - these cutting machines do not print

@@FreestyleTravelShop, what kind of printer is that?

It’s the HP Envy 6055 - linked in the materials in the description!

I think I upgraded to the business version? I wanted the version that had the nesting tool and a few other features

@@FreestyleTravelShop thank you! It was definitely worth the upgrade for the best feature!

The ink may bleed

HP Envy 6055 - amzn.to/3CCqnnI

Make sure that you have selected the cutting mat for cutting and that you have enough light in the room for the sensors?

Do you mean the color stickers? You have to print your project separately - the cameo is not a printer!