thumbs up for using old packing foam. that was brilliant. you also may have been able to cut out the shapes better if you made a vertical cutter like a band saw with the nickel chrome wire. 20mah battery isn't much at all. a 2032 coin cell would give 220-235mah. and possibly weigh about the same.
Easy. Put weights on the ends of a nichrome wire with ends draped over the edge of the table. Use 2 same diameter drill bits under the wire to the thickness desired.
@@bryanewyatt thin magnet wire wrapped around a pencil 25 times, slid off the pencil and superglued to hold it together. A small neodymium magnet that will fits through the hole. Current will make the coil move one way or the other. I dont know the voltage. I would start with 1.5 volts. The actual wraps around the pencil im not sure about. But ive seen them before. Im guessing 25 -30 wraps the thinnest magnet wire you can get. Power up 3.0 uses it. But I highly suggest not buying them. I bought 2 and theyre horrible.
Very nice. I was thinking about making something like that, but I wouldn't want to add a motor until I get some more experience with the components needed.
its an Actuator instead of an Servo Motor... its an hand wound coil of "painted" copper wire ;) the paint acts as an dielectric fluid so its avoidin shorts between the windings :) if you put an source on the coil it would make its own magnetic field and will pull the static magnet to itself :) and into the other direction if you invert +/- hope you understand what i mean :D my english is not the best... please correct me if iam wrong :D
Nice! now i know what to do with my old 2 channel rc plane that has all these electronic components already! it was one of those mall indoor rc plane toys. has the magnet/wire loop rear tail system and everything. :)
300gr is the lightest plane I've ever built. This thing is 100 times lighter. You sir, blew my mind! I never expected that building small requires a whole new set of skills.
@ozvooky The width of wings is 20 cm. However, a size is free. The environment manufactured, respectively is different. Please change the plan into the size suitable for environment.
rc boats yeah, same concept of a speaker. copper wire with a current creates an electromagnet that acts appon the magnet deppending on the direction of the current.
@@user-zn7zo1lm6w How is the coil current and polarity controlled? Normal receiver output would be pulses of varying duration for a servo instead of what appears to be analog current control.
I am working as a child care assistent in a kindergarden. 3 to 6yo. I have some RC experiences with quadrocopter and planes. I have a deviated Devo 10. Can you give me some suggestions for a good starter kit please? I want to build some models which can be flown inside in a 5m x 5m room. Where can I get all the tiny receivers, actuators, motors, batterys, ESCs? I think this will be a lot of fun for the kids!
I had one of these before: www.amazon.com/Top-Race-Electric-Infrared-Airplane/dp/B006J285CI?ie=UTF8&keywords=Mini%202ch%20rc%20plane&qid=1465413632&ref_=sr_1_1&sr=8-1 They arent RX channel though. They have their own 2ch remote. They fly good. A little fast, but maneuverable. I recommend getting that one.
you are brilliant I have made the same before i saw this as well as i nano jet using an electric prop incases in a tube and another prop behind , I would love to see your idea of a jet could you make one and post the video please, last i have to use receiver from old double prop helicopter but its too big where can i buy the small receiver you used in this video thank you
Great video @toyukogatalabo , thanks a lot for this video tutorial! Just a question, you always use spektrum (dsm2) on your receivers? there is another option for those tiny little marvels? Best regards,
excelente vídeo gracias por compartir ese conocimiento con todos antes me parecía muy difícil hacer un avión así pero con esa información es mucho mas fácil de lo que pensé, muchas gracias. A y no tienen vídeos de otros modelos de aviones por favor si los tienen les encargo el enlace.
l2ic3 Connecting the transmitter to the receiver and making everything controllable is not made clear. In fact, the video wasn't too clear on the electronic elements of the project as a whole.
