when it is practical to do so, CA should be used BETWEEN wood components. instead of relying on wicking to secure the join.! 0420 ailerons are PART of the wing.! said another way, a wing should have ONE trailing edge, not two or three.! 0433 you are making this Small model HEAVIER, by putting this tape on. tape covering should be put on 'from the trailing edge forward'. 1100 stabs are poorly designed.! 1644 it is the opposite of smart to add non-functional MASS, aft-of the cg/c-m. 1845 in case you don't know, you are locating the center of mass (c-m), not the cg. AND, the c-m is supposed to be located a bit forward-of the cg. cg is supposed to be located at thirty percent of chord. c-m is supposed to be located on the thrust line, at a point that vertically aligns with twenty-five percent of chord. 1943 there SHOULD be a (horizontal teardrop shaped) concentration of mass Near where the c-m is SUPPOSED to be located.! consequently, the high locations of the battery and rx are less-than ideal. googletranslate
