Тёмный

How to Make Whiskey Dispenser at Home | Handmade Alcohol, Liquor, Whiskey Dispenser Ideas for Gift 

Wood Euphony Woodworking
Подписаться 1,5 тыс.
Просмотров 30 тыс.
50% 1

Hi there.🖐 in today's video, we shared how to make a whiskey dispenser at home. It would be the amazing handmade alcohol, liquor, and whiskey dispenser idea. If you follow these simple steps. We hope you can make your own whiskey tap. So, watch the handmade whiskey dispenser full video and try this at your home. In this video, we made the whiskey dispenser from wood and glass block.
Every Think that We Use to Build This Whiskey Dispenser You Can Find Here:
👉 Diamond drill bits 16mm and 18mm: amzn.to/3HTyz4E
👉 Wood Drill bit 20mm: amzn.to/3rtdg3a
Stay connected with "Wood Euphony Woodworking" official RU-vid channel to get more exclusve videos like this one. Do LIKE, COMMENT and SHARE. Don't forget to hit the SUBSCRIBE button and the BELL 🔔. So that you never miss any updates.Thanks for watching :)
✔Subscribe Now: rb.gy/hzysku
------------------------
📺 More DIY Videos for You:
★ Stunning coffee table with resin and walnut wood
• stunning coffee tables...
★ How to make clock from wood and epoxy resin
• How to make clock from...
★ From fail epoxy clock to treasure
• From fail epoxy clock ...
------------------------
🛒 Esty shop: www.etsy.com/shop/WoodEuphony...
🌐 My own web shop: woodeuphony.com
📧 For Business Inquiries:
------------------------
🔸 Follow Us on Social Media:
▸ Facebook : / woodeuphony
▸ Instagram : / wood_euphony
▸ Twitter :
▸ Pinterest:
▸ TikTok:
------------------------
💰 SPONSORED:
No, this video was not sponsored.
⌚ SCHEDULE:
Weekly New Video
------------------------
About me:
Hi there, My name is Anžej and I'm part time woodworker. I love to make things with epoxy resin... this youtube channel is about woodworking with wood and epoxy resin. I don't have my own shop so you will see me in the wood shop from Matija Rižner, owner and CEO of EssenWoodcraft (www.esen-woodcraft.com). Thank you Matija! .
------------------------
#WoodEuphonyWoodworking #WhiskeyDispenserDIY #GiftIdeas #woodworking #lifehacks #gift #dispenser #liquordispenser #alcoholdispenser #diy #doityourself #liquordispenserdiy #beveragedispenser #winedispenser #homemade #alcoholdispenserdiy
------------------------
🎧 Music added from: www.epidemicsound.com
🎬 Recording gear:
Insta 360 one r
mini tripod
------------------------
© 2022 “Wood Euphony Woodworking” ( Official RU-vid Channel )
Thank you for watching this video, click the "SUBSCRIBE" button to stay connected with
this channel.
🌟 Subscription Link: rb.gy/hzysku

Опубликовано:

 

4 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 59   
@thecrapsters
@thecrapsters 26 дней назад
you're not concerned about the inside of the glass not being food safe? Also I'm pretty sure they fill in between the glass with argon gas. Love your thoughts on this. great job it looks really nice.
@woodeuphonywoodworking
@woodeuphonywoodworking 9 дней назад
Hi :) So yes I was concerned but my friend (works in glass company) did say if I fill the “bottle” to the top with water then will be ok. Also I did clean it with 99% alcohol… we did drink from this dispenser two jack Daniels and and three bottles of local hand crafted whiskey :)
@justinbanks2380
@justinbanks2380 Год назад
Little one stealing your tools already 🤣 Great project!
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
🤣 jup, he started quickly :) Thanks 🙏
@zhookeeper
@zhookeeper Год назад
Love the finger push sticks. ❤️
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
🙈
@paulvlogs2207
@paulvlogs2207 Год назад
Awesome work love it!
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Thanks Paul :)
@staceycollins9232
@staceycollins9232 6 месяцев назад
love it
@woodeuphonywoodworking
@woodeuphonywoodworking 6 месяцев назад
Thanks :)
@ericperkins3078
@ericperkins3078 8 месяцев назад
Didn't see you rinse the glass shards out of the block before you filled it; hope you did. Glad the little kid stole your drill. Serves you right for not using ear or eye protection!
@woodeuphonywoodworking
@woodeuphonywoodworking 8 месяцев назад
No worries :) I did rinse the bottle :) Yap… working protection isn’t my strong point…
@JB-dl5th
@JB-dl5th Год назад
Great idea! I actually have a couple of square glass so I would like to try to make one or two dispensers. Where have you found the valve and the faucet ? and have you put some silicone when you've inserted the glass in the square wood to keep it in place ? keep up the good work ;)
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Thanks :) You can find it on amazon or ebay quite cheap :) No, the wooden structure is very tight and the faucet are preventing glass to fall out :)
@epeiusgarage
@epeiusgarage 10 месяцев назад
Nice, I did a video on this too
@woodeuphonywoodworking
@woodeuphonywoodworking 9 месяцев назад
Post the link. I would like to see :)
@chrisdaly6416
@chrisdaly6416 Год назад
Want did you use to fix spigot to the glass and want cork did you use thanks
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Hi Chris :) So I fix the spigot with silicon glue. I used a metal cork with rubber around where it meets the glass.
@user-dl3lm8vt2j
@user-dl3lm8vt2j Год назад
Could you tell me the dimensions of the pieces you used or even just the glass piece you built around? My buddy is trying to make one of these so I was going to get him a really nice cut of wood for the project as a birthday present.
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
My dimensions won’t be any good. Each glass block is custom fitted because they aren’t perfect square.
@ashutoshsrivastava303
@ashutoshsrivastava303 4 месяца назад
How do you clean the glass box after drilling hole in it? It might have glass dust in it
@woodeuphonywoodworking
@woodeuphonywoodworking 4 месяца назад
I didn’t show but I did clean it with soap and water :)
@user-bc9jt9tq2z
@user-bc9jt9tq2z 7 месяцев назад
What is keeping the glass block from sliding out of the front or back of the wood frame?
@woodeuphonywoodworking
@woodeuphonywoodworking 7 месяцев назад
A very snug fit :D
@haugwoods
@haugwoods 5 месяцев назад
Trying to build this and every time the glass block cracks from the spigot hole LONG AFTER IT IS ASSEMBLED.... sitting for hours and hours just fine and the next morning it's cracked. @Wood Euphony Woodworking did that ever happen to you and what's the solution?
@woodeuphonywoodworking
@woodeuphonywoodworking 5 месяцев назад
Hi :) I didn’t have problems with that… But I did have the problems with silicone :) some silicone don’t bond quite well with glass…
@haugwoods
@haugwoods 4 месяца назад
@@woodeuphonywoodworking thanks for the quick answer, Glass Block #9 actually turned out 😲- I think the Problem was that i drilled too close to the corner and by sacrificing some of the volume in the very bottom and place the spigot a little higher the glass stayed stable. I did not like the Silicone solution either and instead drilled a 1.5 Inch fill hole, which allowed me to reach in with some long needle nose plyers and mount the spigot with the included silicone seals, chrome grommets and nut. I used a black rubber stopper from Home Depot as a stopper and it looks okay.
@woodeuphonywoodworking
@woodeuphonywoodworking 4 месяца назад
Uu nice… I will try it with your idea with the silicon seal… maybe will be better than my original idea… thanks :)
@jasonwood3285
@jasonwood3285 2 месяца назад
any reccommendations for a stronger bond than silicone?@@woodeuphonywoodworking
@jimv.travis6398
@jimv.travis6398 Год назад
How did you install the spigot ?
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Hi. I did drill a simple whole with diamond drill :)
@daruldebalzah
@daruldebalzah Год назад
Is there air pressure in the block? Do i have to pay special attention when drilling inside?
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Hi :) No there isn’t pressure in it… just make sure that you don’t press to hard and that you add a water to the drilling spot.
@daruldebalzah
@daruldebalzah Год назад
@@woodeuphonywoodworking Thanks
@gregwilson4982
@gregwilson4982 5 месяцев назад
Where do you get your blocks from
@woodeuphonywoodworking
@woodeuphonywoodworking 5 месяцев назад
You can ordered in amazon or eBay… I buy it in building store where have a cement and other building material…
@gmeister03
@gmeister03 Год назад
Mmmmmm. Glaaa shards in my whisky is the best. How’d you make sure it was clean? This is great work. I’ll be using your design for my own. I just don’t know how to remove all the glass
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Hi :) I didn’t show it but I did wash 10 times before gluing the valve :) there vast big glass pieces in beside 2 small circles … only white glass powder… when you drill don’t push to hard….
@gmeister03
@gmeister03 Год назад
@@woodeuphonywoodworking thanks for the advice! That makes more sense with the whole glass dust. I’ll keep that in mind
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
@@gmeister03 no problem :) If you have any questions just ask me , I’m glad if I can help :) Be safe!
@user-yc1gl2kw1y
@user-yc1gl2kw1y Год назад
Can you please share a link for the taps?
@woodeuphonywoodworking
@woodeuphonywoodworking 11 месяцев назад
You have on amazon. They have many varieties…
@danwalker9999
@danwalker9999 Год назад
Any research done to assure glass block is lead free?
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
glass does not emit harmful substances, only when we drill into it.
@xavier_x1871
@xavier_x1871 Год назад
How do I remove the two drilled glass pieces inside the block? 🤔
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
With help of the water :) it’s much easier:)
@mattbodeman7544
@mattbodeman7544 Год назад
Is that a 6x6 block
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Correct 👍
@ald.3449
@ald.3449 Год назад
How do line up the hole in the wood exactly with the hole in the glass for the plug?
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
First you drill in the wood then you insert glass block and mark where you must dril with the diamond drill… easy peasy :)
@ald.3449
@ald.3449 Год назад
@@woodeuphonywoodworking ty makes sense. Probably dumb question. Ty again
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
No questions is dumb :) no problem, it’s my pleasure :)
@ald.3449
@ald.3449 Год назад
@@woodeuphonywoodworking ty, Merry Christmas to you and your family
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
@@ald.3449 ty and same to you and your family:) happy holidays!
@stephaniebrown461
@stephaniebrown461 Год назад
Where did you get the glass block?
@woodeuphonywoodworking
@woodeuphonywoodworking Год назад
Hi. I did buy it in hardware store.
@user-lo3jh6em4l
@user-lo3jh6em4l 5 месяцев назад
Very nice job, in fact, I think he does it. But I'm not going to make the mistake that this gentleman has made, of giving his son a screwdriver and manipulating a toxic element in front of him
@woodeuphonywoodworking
@woodeuphonywoodworking 5 месяцев назад
Thanks 🙏 But I don’t know what toxic element you mean?
Далее
Small Workshop Organization and Layout Idea
13:13
Просмотров 122 тыс.
Такая ситуация 😅 #МашМилаш
00:52
Lamps made of glass bricks
9:15
Просмотров 29 тыс.
KONELCARE wood liquor dispenser
1:31
Просмотров 4 тыс.
Whisky/Rum/Likör Dispenser aus Eiche - diy
13:14
Просмотров 534 тыс.