How to Make Your Bicycle Faster. Bike Rear Hub Maintenance | Shimano FH-RM30

Подписаться 40 тыс.

Просмотров 2,5 млн

50% 1

Hello cyclists!
In this video, we will show you how to Make Your Bicycle Faster.
I will teach you Bike Rear Hub Maintenance.
For example, we will use a bicycle hub Shimano FH-RM30.
This video lesson (DIY) for cyclists. Video tutorial in style "ASMR"
This video speaks through mechanics, void of verbal content. Universally understandable; designed as a DIY tutorial.
Detailed episodes in this video tutorial:
00:00 How to make my bike faster.
01:01 Removing the eccentric and cassette from a bicycle wheel.
01:20 Cleaning a bicycle hub.
01:36 How to turn a hub.
02:33 Cone wheel bearing on your bicycle rear wheel hub.
03:45 Cleaning the rear wheel hub.
05:27 Bike rear hub maintenance.
05:45 How to grease a bicycle hub.
07:34 How to adjust cone bearings on a bicycle hub.
09:26 Installing the cassette on the freewheel.
#maintenance #bicycle #tutorial
🆗🎥🚲
Write in the comments, what you would like me to do in the new video.
❓❔❓
Ask your questions in the comments
👇👇👇

Наука

Опубликовано:

11 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 474

@NiceBikeService Месяц назад

❤ If you liked this video, 🙏 share this video with your friends 📈 it will help the development of the channel! ❓ ask your questions

@Red-Yo 3 месяца назад

I’d rather have someone who doesn’t talk and show me every step of the job, then someone who talks about every step of the job, but only shows me one part of it. Great video for a aspiring Bikefarmer

@NiceBikeService 3 месяца назад

Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈

@Red-Yo 3 месяца назад

@@NiceBikeService Will do !

@NiceBikeService 3 месяца назад

😻

@baca350.1 11 месяцев назад

Brawo za warsztat i smar w strzykawce!

@mehmetsedatozen4931 Год назад

Verdiğiniz bu güzel detaylı bilgiler için teşekkür ederim.

@bernardsteyn7306 3 дня назад

Best tutorial out here regarding cone and cup bearing service!

@NiceBikeService День назад

Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈

@andresruis9030 Год назад

Excellent greetings from Cali Colombia South America

@wizzyardy Год назад

bardzo fajny film. wszystko prosto i dobrze pokazane, bez komentarza i zbędnej muzyki. super!

@antoniojoselopesdossantos6765 3 месяца назад

Sem música ficamos melhor no assunto. Gostei também.

@zdravo4 Год назад

Very good video, I liked and subscribed. When I service hub I usually replace all the balls and cones if needed (if they have pits or races). And yes they are pain in the ass to set up correctly bearing to rotate peoperly.

@gren509 Год назад

Good basic service, but you have a way to go. When adjusting the cone tension, put the cassette side locknut in a vice to hold the axle still.

@ThomsoyaWires-mb3wk 11 месяцев назад

Very professional work experience ❤

@eliasguzman5370 Год назад

Estaria bueno un video mostrando el taller. Muy buen video

@user-fj1ih1zy8r Год назад

Чудова робота, дякую за підказку з мастилом. Дівінол справді хороше мастило, 👍

@vitaliyzt719 3 месяца назад

чем оно хорошее ? раскрученое фуфло которое вытекает в жару и не работает даже в нулевую температуру

@alexandrecandido7718 Год назад

Ótimo trabalho, parabéns!!

@pawestasiowski8421 Год назад

Podziwiam Pana pasję, zaangażowanie i miłość do rowerów:) z przyjemnością oglądam filmy pomimo, że sam nie jeżdżę na rowerze (ale umiem ;)) wszystko jest wytłumaczone i pokazane tak, że każdy jest w stanie zrozumieć. Mam pytanie na które nie znalazłem odpowiedzi w necie.. Jakiś czas temu serwisowałem swój stary rower szosowy Peugeot. Miałem problem w doborze ilości śrutów. Włożyłem z powrotem tyle ile wyciągnąłem i okazało się, że jest jeszcze miejsce. Dołożyłem taki sam rozmiar i albo było o 1 za dużo albo zostawało miejsce i nie zmieścił się już żaden śrut.. Czy to ma jakiś wpływ na płynność pracy piast? Czy można zostawić troche wolnego miejsca czy zmienić rozmiar śrutów na większy tak aby wypełnić lukę? Po złożeniu miałem wrażenie że koła nie kręcą się płynnie.. Pozdrawiam

@dennisyoung4631 Год назад

I wish I could understand Polish. O.P. needs some Pivo, perhaps? A sip or three?

@MrAdf1984 8 месяцев назад

Всегда должно быть место под один свободный шарик. До отказа забивать шариками нельзя.

@jeswanthjonas7449 Год назад

Useful info but the tyres look good where to get them are 26" available nowadays?

@Paranormal78633 11 месяцев назад

Yo hace años me encontré los rodamientos como huevos,por eso es muy importante esos mantenimientos

@jonathanlyon1065 4 месяца назад

Although I do not like bearings and cones, you did something I never thought of. That is backing off the cone to the lock nut to compensate for the over tightening of the lock nut.

@dmosboss758 4 месяца назад

that's a must to ensure it rolls free

@NiceBikeService 4 месяца назад

Thank you for your comment. It also allows you to adjust the wheel tightness in the future without disassembling the entire wheel

@coliogstrocastaneira1057 10 месяцев назад

Que tipo de grasa lubricante utilizaste para los rodamientos?

@sayakamu5450 Месяц назад

This makes it really easy, thanks bro

@NiceBikeService Месяц назад

glad to be of service! thanks for your feedback 😘

@lordbr1798 11 месяцев назад

Boa noite. Vc sabe qual cartucho de retorno serve na suspensão suntour xcm rl ds 29, coil spring 100mm da sl329?

@NiceBikeService 6 месяцев назад

⚠ ❓ ⚠ *ASK YOUR QUESTIONS* 👇👇👇

@whothefoxcares 5 месяцев назад

when a bike mechanic is working on your bike, he is pleasing his spouse, not yours.

@nebulous962 5 месяцев назад

what hub grease would be good for winter use? the stock shimano seems to be too viscous for winter use.

@zurymacias6048 5 месяцев назад

@dbskksdk9624 3 месяца назад

Is that true or fake

@LaimisIsoda 3 месяца назад

what greese do you use? Thanks?

@andreabugatti6792 8 месяцев назад

very very interesting. A curiosity of mine: why didn't you do the maintenance of internal bearings of the freehub budy?

@NiceBikeService 8 месяцев назад

Thank you for your feedback. There is a separate video on our channel with freehub service.

@mikelafferty5253 9 месяцев назад

what are you using to clean with and what is the lube?

@JealousWafer 2 месяца назад

I have a similar hub I just serviced recently (Deore M525A), the bearings and race is smooth as glass even after putting thousands of km in it. These hubs are not the best, but they are reliable. 🐐

@NiceBikeService 2 месяца назад

Yes, they are very high quality👍

@dfpguitar Год назад

I used to service my hubs like shown. But then an engineer pointed out that the hardness of the balls is greater than the hardness of the hub. So the surfaces of the hub will wear away before the balls do. Making ball replacement pointless. But it's still worth cleaning and greasing.

@MrJob91 Год назад

Hardness has little to do with pitting from rust. The cup and cone degrade sure. Its incredible how well a newly greased hub rides with new rust free ballls

@hagakuru Год назад

@@MrJob91 That's what she said!

@colecoleman1499 Год назад

I've been doing this for years. Not even had a slightest issue with hubs wearing out. Just make sure you use . Ntn balls. Chinese balls will fuck up the hub

@robertmcfadyen9156 11 месяцев назад

@@colecoleman1499 Ask a METALLURGIST .

@robertmcfadyen9156 11 месяцев назад

@@colecoleman1499 I use SKF or NITTO , but from Japanese made batches.

@pierrerreip 17 дней назад

One of the best videos on cup and cone bearing I have seen. Not very clear on how to start tightening it all back again? Also missing torque. Shimano manuals always specify the torque for cup and cone which if I remember right is between 15-20Nm and for the cassette it's 40Nm which is also stamped on the nut unlike the cup and cone nuts. Do you tighten on one side first, then adjust from the other side? do you have to have an equal amount of threads sticking out on both sides etc.?

@anonymously241 Год назад

Great job Rj 🚴🚴‍♂️🚴‍♀️👌

@alvinoong5583 11 месяцев назад

I follow your videos it work. My bike is faster .nice

@EduardoFlores-ol2ge Месяц назад

Trabajas Muy bien y muy limpió te felicito

@ThDoGrau18 Месяц назад

Brabo, só me falta coragem de desmontar minha bike novinha kkkkk

@nildocarvalho1471 11 месяцев назад

Vou trocar as esferas metalicas.. por ceramicas!!! What u think change steel bearing, than ceramic balls?

@06przemek21 Месяц назад

Do piasty wrzucasz nowe kulki czy to są oczyszczone stare, a cała operacja polega tylko na wyczyszczeniu, przesmarowaniu i wyregulowaniu piasty?

@robertmcfadyen9156 11 месяцев назад

Attn Nice bicycle service , what can you then do if the bicycle is functioning well but a very fussy owner of that bicycle is still not satisfied ? Seals ALWAYS ADD DRAG AND FRICTION . EVEN WITH QUARQ AND CERAMICSPEED PRODUCTS , I CAN STILL FEEL ROUGHNESS ALTHOUGH VERY SUBTLE . SOME DT HUBS ARE LOUD YET THEY HAVE A FAIR AMOUNT OF DRAG DUE TO PAWL SHAPE AND RETAINING SPRING TORSION . SOME PROS STILL USE THEM WITH THIS DRAWBACK BUT WHY ?

@KuswandiRia03 3 месяца назад

Perawatan Hub Belakang Sepeda, makasih om tip/ cara nya

@NiceBikeService 3 месяца назад

terima kasih atas komentar Anda! 😘

@finncarlbomholtsrensen1188 5 месяцев назад

As an owner of a small wheeled, heavy rolling Brompton I need all the help I can get! I hope to be able to replace mine with ceramic ball sets, as finished units, as in my head set!

@NiceBikeService 5 месяцев назад

I wish you good luck with your service!!!

@abrindoosolhos933 2 месяца назад

I loved the video. If you let me ask a peculiar question. Is that possible to use this kind green grease for do maintenance on MTB shocks? At least lub the piston stroke? Another question, What do you use for spray cleaning the dirt from the rims? Thnx

@NiceBikeService 2 месяца назад

Thank you for your comment. If you have a budget fork like RST or SUNTOUR, you can use such a lubricant, if you have something higher level like FOX or RockShox, then it is better to use the original lubricants recommended by the manufacturer. We use isopropanol in the sprayer

@berndm.9356 Год назад

Gutes Video ! Ich habe mir vor paar Monaten ein neues HR gekauft. Nase voll von losen Kugeln, Fett und vielen Bauteilen. DT SWISS 350 Hybride. Wir sollten mehr europäische Produkte an unseren Bike's bevorzugen.

@user-vb6hj8fi3d 7 месяцев назад

다른 언어권의 시청자들이 많이 들어오는거 보니, 흔한 영상은 아니네요..ㅋ 많은 도움이 되었습니다. 비록 실력이 일천해서 시도해볼 엄두는 안나지만...ㅋ

@NiceBikeService 7 месяцев назад

친절한 피드백에 감사드립니다.

@chuckborden8532 4 месяца назад

Nice video..thx I like the no talk...

@NiceBikeService 4 месяца назад

Thank you for your comment! 😍 If you liked my videos ❤️, support the channel financially 💰🙏. Use the "Membership" / "Sponsor" function on RU-vid ✊😘

@aureoreis6030 Месяц назад

De tantos testes que tenho feito, fiz um furo três milímetros no corpo do free hub por onde coloco periodicamente graxa azul misturado com óleo jerod bem macia pra não travar os clics que tambem serve pros rolamentos dos cubos de rodas.

@khuongnguyenbao5336 Месяц назад

Thanks you. Very good.

@jjcc80 Год назад

Salut, am o problema la o roata asemănătoare(caseta) după centrare rotii pinioanele au început sa joace, mecanicul mi-a spus ca trebuie schimbata caseta sau angrenajul, ce poate fi?

@florisnr11 Год назад

If you do it like skate bearings, use only one drup off oil, nothing more. Qnd you have a much smoother ride

@adrianTNT 14 дней назад

9:13 when you finally tighten it, what if it spins the axle and exterior nut together ? The inner nut would become loose from ball bearings. Does it work if I put thread lock on inner nuts and grease on outer nuts when tightening them ? 🤔

@NiceBikeService 9 дней назад

First, you press the nut firmly onto the cone and then slowly twist them together until they are ball-shaped, so the bushing does not come loose when you ride. A thread locker is not necessary, as it will interfere with the adjustment of the bushing in the future

@postmodernism1417 Год назад

Perfect !!! 🎉

@Evader_hawaii 11 месяцев назад

What is the spray and the green lube

@itsmondaytho Год назад

Hey man, I would like to ask.. Why my rear QR Axle always bent everytime I use my bike, I already installed it really good and precise, what is ur opinion about this?

@itsmondaytho Год назад

@@NiceBikeService well, my weight is about 73kg, and height 178cm I think I must have new bike, 27,5 or 29er ya?

@pablograciasanchez7953 Год назад

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

@griffon2-6 Год назад

@@itsmondaytho how are we supposed to know if you prefer 27.5 or 29 or maybe even 26?

@rosomak8244 11 месяцев назад

You have to span the wheel in with more force to prevent that. Think about the force distributtion.

@blackIwaterIpark 4 месяца назад

Pytanie do Autora filmu: jakiej cieczy używasz do odtłuszczania powierzchni? (chodzi mi o ten płyn w małym spryskiwaczu). Fajny jest ten kanał. Pozdrowienia. 👍

@NiceBikeService 4 месяца назад

ciecz - izopropyl dzięki za komentarz! udostępnij ten film znajomym, pomoże to w rozwoju kanału! 📈😘

@dennisyoung4631 Год назад

Just got done looking after my *own* rear hub…. Shimano uses a lighter grade of grease (compared to, say, Mobil-1 grease) and they tend to put a modest amount in. Used Mobil-28 aircraft grease, because it was in the Dualco grease gun, and I had it for lubing the BBS-HD motor… Bike seems to roll noticeably freer compared to before servicing.

@adrianTNT 14 дней назад

Is it OK to have bigger bearing balls on one side than the other ? I found this on a pre owned JoyTech with a trough axle.

@NiceBikeService 9 дней назад

We put in the same balls as the ones installed by the manufacturer. Usually, the balls in the front hub are smaller, maybe it was the front hub in that video

@Viralwebus007us Год назад

Hi What kind of bike lube used here ?

@steffenmullinski1551 7 месяцев назад

Sehr gutes Video 👍👍👍👍

@NiceBikeService 7 месяцев назад

❤️😺

@fmphotooffice5513 7 месяцев назад

Q: What is the transparent green "grease". I'm getting ready to do this. I have plain (NLGI#2) "marine" grade grease handy. Also what is the cleaning spray? I have reagent grade 100% isop. alcohol with Simple Green that quickly drgreases a cassette in about a 30 minute soak. I then WD40 the cassette (as water repellent.) Then the only lube it gets is from the chain. Please advise.

@NiceBikeService 7 месяцев назад

Hello friend! We use Divinol thick calcium grease for lubrication, your marine oil will also work. We use isopropanol in the spray, the same as yours. The cassette does not need to be lubricated with anything, WD 40 will evaporate quickly at best, and at worst, its droplets from the spray will get on the brakes and they will start whistling and squeaking.

@fmphotooffice5513 7 месяцев назад

@@NiceBikeService The WD-40 is (was) applied and wiped BEFORE putting it back on the wheel. Degreasing with alcohol and Simple Green leaves the alloy completely unprotected, so dry it squeaks when you rub it like a washed clean food dish. I have seen pitted alloy components from water damage. If WD-40 evaporates and I also only want lubrication coming from the clean chain lube, what do you recommend for repelling water on dry components- if anything at all? Also, thanks, I do recommend "marine" grease on the seat tube or when tightening components. I first saw this when someone was pressing in a sealed wheel bearing. That grease is made to be used on wet conditions on boats, perfect for water splashed hubs and bottom brackets, etc. Sealed bearings usually get replaced from water damage almost as much as when just wearing out.

@remy9215 6 месяцев назад

@@fmphotooffice5513 Je pense que tu t'embêtes trop, ce qui fait toute la différence est la régularité des entretiens suivant l'utilisation, peu importe la "qualité" de la graisse utilisée, il y a bien des graisses spécifiques pour tout usage mais c'est se prendre la tête pour rien, il faut s'établir un carnet d'entretien suivant sa propre utilisation en prenant en compte son environnement, si tu roules dans la terre ou proche de la mer induira forcément une maintenance plus assidue que de faire de la ville. Le WD-40 est un bon produit pour le quotidien, ça chasse l'humidité et protège les pièces de la corrosion après une balade pluvieuse mais ça en fait pas une bonne maintenance, c'est plus une protection à court thermes. Car ce qui crée les dommages est la poussière qui s'accumule et ça peu importe la graisse...

@user-ff5uu3bg6q 2 месяца назад

You have it down to a nice flow And I think you used just the right amount of grease , my first response was , hey , use more grease , but then I remembered the title of your video. And I think that is as good as you can get from entry to model range cassette hubs . Great video 👍😊

@dajoos8881 8 месяцев назад

Divinol Fett Top of 2003 Is this what you use to lubricate bearings?

@NiceBikeService 8 месяцев назад

yeas)

@mariolasowa5208 11 месяцев назад

Jaka przyczyna może być zblokowanej kasety ?

@marioe7596 5 месяцев назад

what's the name of the part removed at about minute 4:10 ? do you know where I can find it? I think mine was damaged (bent) when I tried to removed it. What is it actually good for, just protection?

@NiceBikeService 4 месяца назад

Yes, for protection. It's hard to buy one, every bike hub has a unique one.

@Manjunatharao-rw8ls Год назад

Good job

@SodergrenWoodWorking Год назад

Hey man! What brand on the green grease are you useing?

@yvesss_818 Месяц назад

It’s Shimano premium Grease. I use that too

@grzegorzmrozek4610 7 месяцев назад

Kiedyś się bawiłem tak jak tuż tymi pseudo piastami,od dobrych kilku lat jeżdżę tyłka na piastach z łożyskami maszynowymi,są praktycznie wieczne a jak chcesz powiecmy rozebrać tylna piastę to można to zrobić jedna reką,polecam piasty novateca bez żadnego serwisu zrobiłem na takiej piaście 30 tys km a jak ja rozebrałem to wyglądała jak nowa,kulki na złom:)

@NiceBikeService 6 месяцев назад

ciekawy komentarz 👍

@tomekborucki1120 6 месяцев назад

Tylko część piast na maszynach jest rozbieralna bez narzędzi. Te piasty, ogólnie, nie są wieczne. Piasty eksploatowane cały rok, w każdych warunkach, zwyczaj żywotność łożysk to kilka tysięcy km. Serwisowałem tysiące tych piast. Te które jeżdżą bez syfu - mogą mieć dłuższe przebiegi bez serwisu.

@euzebiuszkarpacki3810 2 месяца назад

Czy gdzieś można a jeszcze kupić części to tych starych rowerów tj. stożki, łożyska itp itd?

@NiceBikeService 2 месяца назад

Części zamienne, takie jak te na filmie, można łatwo znaleźć w sklepach internetowych lub na chińskich targowiskach, w przypadku starszych rowerów trudniej jest coś znaleźć

@JosDamFotografie Год назад

Top! Dankjewel. Enig idee of die super handige magneet nog ergens te krijgen is? 😊

@JosDamFotografie Год назад

@@NiceBikeService yep, vooral voor lagers.

@pablograciasanchez7953 Год назад

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

@lukasHenchman 7 месяцев назад

the right tyres will make your bike faster

@NiceBikeService 7 месяцев назад

😸

@ThienThanh 10 месяцев назад

Cảm ơn bạn chia sẻ rất hay

@distortion7776 Год назад

Дуже цікаві відео. Підкажіть, що за мастило зеленого кольору для кульок в підшипнику?

@firetester1 Год назад

@@NiceBikeService This lube is hardly suitable for wheel bearings because of it's very high viscosity of the base oil.

@distortion7776 Год назад

@@NiceBikeService дякую

@marcinkowalski8353 Год назад

Very Good video. I subscribe!

@luisgarrovillanueva6229 2 месяца назад

Jaja..... que Buena, buena técnica para colocar los balines...🙂

@NiceBikeService 2 месяца назад

gracias por tu comentario 😘

@chanrite1 Год назад

thank you

@CarlosV460 11 месяцев назад

Si se ha roto la parte donde sujeta los balines de parte de la llanta, o sea que se desoldo, tendre que reponer toda la llanta? O solo el tubo ese? Es que si esta roto por dentro

@CarlosV460 11 месяцев назад

@@NiceBikeService como te envío una foto o video?

@BarangLamalawas 11 месяцев назад

Nice sharing

@jorge2507 8 месяцев назад

Excelente video, felicidades. Que grasa es la que usas?

@NiceBikeService 8 месяцев назад

Gracias por sus comentarios. Como lubricante, utilizamos grasa gruesa de calcio Divinol

@mateuszpawlak1276 9 месяцев назад

Dobry filmik. W moim rowerze jedna kulka zmieliła się. Na miseczce w piaście zostały dość głębokie rysy. Lepiej zostawić tak jak jest czy spróbować wybić starą i wbić nową. Nie widziałem nigdzie aby ktoś to robił stąd moje obawy.

@adredy 4 месяца назад

nie wiem czy tak latwo wybic to jakas prasa do tego potrzebna lepiej cala piaste kupic

@PINE-eu6fc 24 дня назад

Which is the greese used in this video

@nareshkarambele9552 8 месяцев назад

Is oiling required for loose bearing? if yes after how many klm

@NiceBikeService 8 месяцев назад

As our experience has shown, if the wheel spins well and there is no play, there is no need to open the hub and do anything else. The grease does not need to be changed for prevention.

@niteshades_promise 5 месяцев назад

Im a fan of red high temp greese.🍻

@NiceBikeService 5 месяцев назад

🚀

@AnotherMrLizard 5 месяцев назад

I like the motorex

@NiceBikeService 5 месяцев назад

also good !

@missileGauges 3 месяца назад

How do you know when the bearing balls need to be replaced? Is it when they are not as silver anymore?

@NiceBikeService 3 месяца назад

Specks and dimples will be visible on the bearing balls, and the ball may not be perfectly spherical

@shijai 2 месяца назад

What spray are you using to clean the grease?

@NiceBikeService 2 месяца назад

isopropanol in the sprayer

@MyanmarPyi-uq2kt 11 месяцев назад

How to made your grease oil needle?

@gepardchester6495 11 месяцев назад

Smaru typu lt 43 można użyć ?

@lelvihibo8108 9 месяцев назад

Where can I get all tools for reparing ...help

@Lift_withmusab Год назад

Sir i just wanna know how i can fix the wobbling issue in my fat bike the thing is that there’s no play in the axle i did the following steps mentioned in the video but the tire still wobbles what do you think about it. What do you think about the loosen spokes?? Tell me to fix this problem hope you find a way 🙂

@liamcolumbino2062 Год назад

Maybe try truing your wheel or tighten the quick release

@liamcolumbino2062 Год назад

I have a problem where my bike wheel missaligns when i use it. Also cleaned the rear hub and found out that its not the root of the problem. Tightening the quick release solved the problem

@Lift_withmusab Год назад

@@liamcolumbino2062 dude i tried but that’s not working

@Lift_withmusab Год назад

@@NiceBikeService okay then I’ll make a video on the issue and will send it to you?? Instagram ?

@MikesVlogss 7 месяцев назад

🚴 Does anyone know what kind of oil he is using in the video?

@NiceBikeService 7 месяцев назад

For lube, we use thick calcium grease Divinol. But you can use another thick grease.

@MAJORZiiN 11 месяцев назад

Que graxa é essa e que seringa é essa?

@szankony6276 5 месяцев назад

Takie kulki to nadają się do procy wypłoszyć wronę albo srokę, bo do jazdy szybkiej używa się łożysk ceramicznych.

@NiceBikeService 4 месяца назад

))) A kto powiedział, że potrzebujemy zbyt dużej prędkości? ))))))

@szankony6276 4 месяца назад

@@NiceBikeService To nie przyspieszy roweru cokolwiek to znaczy, nie macie bladego pojęcia o fizyce.

@mazditzo Год назад

what kind of green grease is that? brand and type?

@user-sp2rw1vl3z Год назад

maybe....it is shimano premium grease,it can be used for various porposes. in my case,I use it for head parts.

@NiceBikeService 8 месяцев назад

For lube, we use thick calcium grease Divinol

@agnelfrancis5914 8 месяцев назад

Hi, what type of Grease & steelballs you have used?

@NiceBikeService 8 месяцев назад

We use Divinol calcium grease and 6mm Shimano balls

@Tailspin80 7 месяцев назад

0:24 I thought the grease cover went in the other way up, as at 0:53. No?

@NiceBikeService 7 месяцев назад

These are different covers, one for the freehub and the other for the hub. Just remember or take a picture of the position of the cover on your bike. Good luck!

@Tailspin80 7 месяцев назад

Mines a 6 speed freewheel MF-TZ06. I’ve just bought a new old stock replacement which I’m about to fit. I’ve had it apart a few times over the years so no way of knowing for sure how it’s supposed to go together! Thanks for the insight though.

@somewhereuk1957 2 месяца назад

So you weren't going to lube the Axel and threads before install./.?

@NiceBikeService 2 месяца назад

The axle itself does not move, so there is no need to lubricate it

@DiversidadeVisual Месяц назад

Bom trabalho! Like.

@Remek42195 Год назад

2:30 u mnie w tym momencie nastepuje gonienie kulek po podlodze 😭

@mayster8 Год назад

Не можна використовувати магніт, деталі намагнічуються і притягують до себе весь металевий пил.

@darkrai1475 Год назад

are you from korea where is your Shop located thanks?

@fghftyy812 Год назад

사용한 그리스가 어디제품인지 궁금합니다.

@SzynszyL01 5 месяцев назад

I jedna z bieżni do wymiany za jakiś czas. CIężko było nałożyć na nią smar? :)

@NiceBikeService 5 месяцев назад

zazwyczaj nie mają na sobie smaru.

@lesbinks5416 3 месяца назад

What is the best grease to use for bearings?

@NiceBikeService 3 месяца назад

There are many, we use thick calcium grease Divinol

@bd5qce 6 месяцев назад

很好玩我要先准备一套工具

@NiceBikeService 6 месяцев назад

if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈

@hudsoncivil 9 месяцев назад

Se o cubo estava assim, imagino que o freehub também deveria ter sido revisado 🤔

@user-vk1bg1en1q 10 месяцев назад

can we use any lube , ?

@Cornel-ng8xe 4 месяца назад

What is the green yellow thing? The paste?

@NiceBikeService 3 месяца назад

is a thick calcium grease Divinol

@the_real_mcgarvyer9 5 месяцев назад

I was wondering what is the make and model for this bike? Because, I am actually curious.

@NiceBikeService 5 месяцев назад

Most likely a Trek, but I can't tell you the model, as this bike was in our workshop almost a year ago

@the_real_mcgarvyer9 5 месяцев назад

@@NiceBikeService oh, okay thank you

@NiceBikeService 5 месяцев назад

❣️

@RazvanTSibiu Месяц назад

What's the size of bearings balls? Ever tried ceramic bearing balls?

@NiceBikeService Месяц назад

The rear bushing uses 6.35 mm or 1/4 inch. We didn't work with ceramic ones, as I think it's an overpayment and a reason to bother. It is better to find high-quality metal balls, for example, from Shimano