HOW TO MAKE YOUR NON TURBO VOLVO MORE FUN ! 

there is literally no one that can wheel 130hp better than drifts and lifts. the absolute best.

Never seen more then 2-2.5 degrees cut head haha but one thing you should do is porting, flow porting the valve canals and match porting the exhaust to the head and head to intake. Love to se it from a fellow Swedish

I wonder how 3mm shaved off the heads and some bike carbs would work, really cool to see tho

Good to see my Civic from an outside perspective. Thanks for giving it a small feature Koltan.

Right now my daily is a 740 n/a that i got for $740 it was sitting since 2009 (the wheels and last inspection were from 09) started up and ran fine had to jump it. All I've done is homemade cold air intake and home made cat back exhaust, trans is an aw70 but i did the accumulator mod and shifter mod (shifts faster and harder you stick rods in the actuator pistons) def want a manual hard to fine them here. have an M cam atm but i'm looking for a k cam but might have to settle for a B or Ipd. def want ethanol for my V70 but idk about the 740 kinda hard to find it around me. There is a shell that sells it but its like a hour away. Most of my time and money goes into fixing the 740 needed a starter, water pump, belts, 70% of the vaccum hoses got 25 ft of orange hose, trans, exhaust was leaking and was missing a muffler, oil was like pitch black couldnt see through it when i changed it like the day after i got it.

I wanna see what you could do with a volvo 240

Everything sounds better with more compression!!!

this is so so so sick, so stoked for this

Thing sounds immaculate 👍🏻

B good to see you build another sled for dumping gravy around the river 😁

This was exactly the info I was looking for, sick build

It was great to get to meet you at the IPD garage sale, bro!

Love to see a similar build I have the same tails and similar wheels on my 88 5 speed wagon

Quality content I’ve got an NA 04 s60 2.4L and been curious about what kind of shenanigans you can get into with Volvos and it makes me hyphy to see some shit I would do to my Hondas done to a Volvo. Only thing I’m missing atm is the rwd 😂

great video brotha

run slightly bigger injectors, and colder spark plugs it`s gonna create som serious heat in there

That thing rips hard

almost 100k subs you can do it ❤

what is the oem number on the 4bar fuel pressure regulator? :)

Just me noticing that there is a bc coil on the driver side and stock on the passenger side

Love this kind of build content 💪💪💪💪

if it is a LH2.2 retarding the camgear will advance the rotor slightly and ad slighltly more ignition timing, doing the reverse will get the opposite result on both sides.

Get the 531 head and vx3 cam and you’ll probably make somewhere between 120-130 hp. 😊

Judging by the way it powers through second it must have at least a bit of curry! This was an interesting video for me because I've had my own plans brewing (non volvo related) to swap out my dished pistons with some flat tops and run high octane fuel for a bit of extra power on an otherwise stock motor, watching this gives me confidence it would be worthwhile.

Apparently aswell, you can gain like 4hp more in your non turbo Volvo if you just go from your crappy old thermostat to one that came on a turbo model, you gain around 4hp for 10 bucks xD, and when you kinda consider how much more money you have to throw out for a decent camshaft that only gives you like 5hp xD yeah I'd do cheap mods all day to make my car have more power the cheap way

Stock injection and carb? Any mods to fuel system?

doing 3mm? i did 2.7 on the old B20's. it was knocking on 98MOM due to the fact that the engine also was 2.2L and not 2.0L as stock. i had ro run with a rely low timing. stil with that low timing the car did run good.. i had about 150/160+hp.

What can i do if there is no ethanol in my country? How can I modify my n/a 940

its so angry now lmao, that cam is as lumpy as 50-cent, what a treat !

Not sure. But i quess that b2**et has 2,5bar regulators only? Correct if im wrong... Other f motors have 3bar regulators. I runned e85 fuel in my b200f and b230f with volvo t5 motor white injectors, 2mm shaved head and A cam+ported combustion shamber and intake and exhaust channels. Comparing to stock b230f, it taked quarter mile end speed 10km/h better than stock

Hell yea

Exakt så vi kör Volvo i Sverige 🥰

When you start making og wagon drift videos

Mine has the same exhaust leak up front lol

have you done anything about the RPM limiter ?

*finishes crazy donuts* “..its faster!”

Where did Ryan source the e-codes? I’m looking to swap on both my ‘91 745T M46 and ‘92 745 auto. Thx!

Yeeeeeeee

so is that literally pure ethanol?

I got cylinder head that needs 3mm shaved off cause of piting.

Stock exhaust? No extractor manifold,, no 2,5" exhaust system?

What wheels on that 745?

Lol that little civic fuxx

why has it only got 1 coilover on the front

Would kick that exhaust out behind the front wheel and call it a day,maybw one short resonator wherever itll fit,should see it hiss

740's share the same engine with 240's right? Is there certainty of doing something similar or very much the same? Being that the b230f in my 240 is quite old, I'd be very cautious of what's going to be done to it.

wish it was cheap in germany but its just expensive asf to get everything legal, cant even change the diff or exhaust :')

blippity blee blop

kinda sounds like an na sr20... not gr8 xd

A 2,5bar regulador have a range around 1,5bar att full vacum and 2,5bar at full throttle A 4bar regulator work around 3bar and 4bar wich means it will have around 2 times more fuel at low loads and low throttle and 60% more at full throttle 😅 Kinda too much

Horni levels went >>>>>> from this video

and if it is a lh 2.2 retard ignition since etanol reacts faster then gasoline when it gets spark

Why shave it when you can blow it, and run some boost...

No sound- was yt bugging. It's fine now

P r o m o S M 😆

Why dont you just fk swap it? Engine, ecu and chips, that'll give you 300hp and alot more fun

Stock exhaust? No extractor manifold,, no 2,5" exhaust system?