How to make your UTV-MX or Power Wheels faster for under $13 

been playing games for some time double voltage is safe, i just watch temps or gear wear

Exactly

You gotta do it

@@throttlefamily4655 I'll tell her you dared me

@@heathenprojects2639 now you had better

@@heathenprojects2639also tell her it’s a double dog dare too

Grind hard plumbing co is Awsome I haven’t watch their videos since the odessy build so sick

Dude for real, I’m waiting on that one next. 😮lol

Upgrade the motors

Did you ever upgrade this I was thinking the same thing I just got my son

No everything worked just as it did we are upgrading the motors currently to get a little bit better torque

I agree some of these things should be faster

No problem

The rigid batteries or tools should come with a charger

Yes he is growing up fast

That’s good to know I had no idea I’ll have to set a timer so I don’t drain the batteries fully

@@throttlefamily4655 yes I killed a 9amp hour.. $200 down the drain. :(

Killed dewalts too need a better option

You can actually buy a low voltage disconnect PCB that is simple to wire and you can set at which voltage it will stop supplying power. That way you can set it as the usual voltage that the power tool stops. There are many videos showing this for powerwheel mods

Yeah the charge went below the circuitry will read look up how to revive / jump them back to life

Maybe is better to buy a 570 motor with more torque and a little higher RPM. I will do this soon on my Maverick power toy.

Check the foot pedal switch for continuity, and that it’s plugged in the receiver well.

So we haven’t had any problems yet.

We just ordered some 24v motors off Amazon that should do the trick

@@throttlefamily4655 thank one other question the link you put in the description the one fir the battery did it come with a battery or just the adaptor I got mine today but was just adaptor I thought it was both if you have a link to battery whould be helpful 😉

@@throttlefamily4655 once you had the new motors did the 24v battery work with all of the other electrical stuff?

Is that one 4x2 or 4x4? I have one that's 12v, but the motors are 35w each

@@kgar7836 for the 4x4

Yea you can

This is what I need answered

@purerosegold2321 Sorry, I don't

I have one without the controller as well and want to add one? I found the controller on Amazon but not sure how?

We actually did burn one of the motors up I don’t know if it’s because we had too much weight in it or the battery but either way we are ordering the 24v motors for it now

@@throttlefamily4655 which motors did you order? Can you post a link?

​@@throttlefamily4655 which motors did you get? Did you get new gear boxes as well? how did it work with the control board/radio/speaker?

@@throttlefamily4655 in theory, if you will want to buy 24V motors you should buy also the computer board and the player. Also I don't know what to say about the fuses. Your 18V battery will be too small for the 24V motors. I consider it is better to buy bigger 12V motors with more torque, for example motors 570 type instead of actual 550 type.

Yes you can

Plastic. But rubber would be cool 😎

The drill battery charger😂

Hyper tough drill battery 20.00

Mine works fine

Using a battery with higher amps will make the battery last longer. Most of the time tool's come with a 2 amp battery but a 4 amp battery will last twice as long as 2, 2 amp batteries. Where as using 2 batteries at once say (24 volt x'2( batteries will be an over load because it will give it a total 48 volts at once. Where the 1 single 24 volt battery that's double the amps (4amps) will give you double the riding time. So keep the same volts and look for higher amp batteries.😊