No video :(

How To Measure Neck Relief & Adjust the Truss Rod on a MARTIN Guitar

Подписаться 24 тыс.

Просмотров 76 тыс.

50% 1

MusicNomad and Master Guitar Tech Geoff Luttrell team up in this easy to follow, step by step video showing how to properly measure your MARTIN Acoustic Guitar neck relief and make the necessary adjustment to the truss rod to perfectly dial you in. The same process can be used for all acoustic guitars. To buy the Martin Measure and Adjust Kit used in this video visit: www.amazon.com...
Being able to measure and adjust your MARTIN Guitar's neck relief is a critical step in the setup process and will improve your playability and sound. MusicNomad is making it real easy for anyone to perform this task. The Precision Truss Rod Gauge comes equipped with the 3 most common relief measurements for Electric, Acoustic, Classical and Bass Guitars (.006”, .008”, .010”). For MARTIN and other Acoustic Guitars, use the .008" Gauge along with the clever Pick Capo and follow the instructions printed right on the gauge. When you are ready to adjust, MusicNomad's 5mm Premium Truss Rod Wrench is made custom to fit the MARTIN Guitars truss rod nut that you adjust in the soundhole. For other Acoustic Guitar Truss Rod Wrench Sizes visit our website trussrodwrench.com to search up your Acoustic Guitar Truss Rod Wrench Size. Our ergonomic handle and rubber protective bumper gives you the comfort around your prized instrument. That's MusicNomad quality - raising the bar in equipment care.
To learn more about MusicNomad's Truss Rod Gauge and Truss Rod Wrenches visit: www.musicnomad...
In collaboration with Master Guitar Tech Geoff Luttrell of SF & Sonoma Country Guitarworks sfguitarworks...., MusicNomad has developed the Keep It Simple Setup (KISS)™. We demystified the process by developing innovative, precision gauges and tools combined with step-by-step general guidelines anybody can follow and setup their guitar to play and sound great. With our KISS method and our gauges you can check the vital areas of your guitar and use our tools to perform your own setup. Not only is it fun, but a properly setup guitar takes your playing and sound to a whole new level. Make sure to check out all of our precision gauges and tools. www.musicnomad...

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@bosn5429 6 месяцев назад

Great job explaining neck relief.

@MrJoelalcasey1971 3 месяца назад

Just done it to my Martin HD35 when I put the gage on 6th fret it was a bit tight, it's fine now with the tools I got from Amazon Nomad truss rod and gage. This footage was a great help. Thanks

@louieo.blevinsmusic4197 2 года назад

Picked up my acoustic again a few years and started playing/writing for at least 3-5 hours daily. I was thinking that maybe the sun had gotten to it and warped my Martin. Nope. Just needed an Allen wrench and some patience. I only have one of those. Good thing is I’m gonna play extremely well after I lower the strings considering the hell and pain that guitar has been putting me through.

@LiftVector Год назад

Really pro video guys, thank you. I'm ordering the MN truss rod wrench for my Martin that has been in storage and traveling through different state climates. She needs a tune!

@altemose_prime 6 месяцев назад

Thanks for the explanation. I’ll be doing this before my next string change.

@barters8124 2 года назад

As someone who has setup his own and mates guitars for 20 years….my mind was blown when I saw the pick being used to fret the first fret when checking neck relief. Lol….how have I never seen or thought of that before?

@MusicNomadCare 2 года назад

In the KISS method you use the pick capo to hold the E strings down at the first fret because the first fret is a fixed reference point for making the truss rod adjustment and string height adjustment. The measurements labeled on the gauges are based off the fixed-point reference of the first fret. Holding down the string at the first fret with the Pick Capo allows you to make an accurate adjustment following the KISS methods linear flow. In the flow you have not yet addressed your nut slot height which makes it a nonvalid reference point. Adjusting the nut slot height is the last step in the playability part of the setup. Following the KISS linear flow allows you to setup your guitar to play and sound great without having to go back and repeat steps.

@joelh3544 Год назад

@@MusicNomadCare yea thats what he said music nomad bot

@brandanleiter 2 года назад

Wow this the best video describing how the truss rod works. Watched several videos on it that left me confused.

@MusicNomadCare 2 года назад

Glad it was helpful!

@TheSearchers1000 Год назад

Clear and concise description of the steps. I will confidently be able to make the correct adjustment on mine.

@jesseacewest 2 года назад

I wish I would have gained this knowledge sooner. I always swing my guitar towards an amp til it breaks in the middle and then buy a new one.

@MusicNomadCare 2 года назад

Rock on!

@seanmettler25 11 месяцев назад

Lol!!!

@titusrider7948 9 месяцев назад

Doesn't that get rather expensive? 😮

@RtaniDean 10 месяцев назад

That sir is a great teaching presentation! Thanks so much 🎵💎🌟💚

@chucks6318 3 года назад

Crystal and easy to understand explanation and demo.Thanks

@xhefriguitars7946 9 месяцев назад

I have been doing Luthier work for years and have adjusted 100s of guitars. LOL...BUT... I never understood till now why a neck needs a slight relief!

@jsls0130 Месяц назад

I always retune before checking my clearance after adjusting the truss rod. Didn't see him do that.

@235buz 2 года назад

Very helpful. Thanks for sharing your knowledge.

@ThePapawhisky 2 года назад

Really helpful and understandable. Thank you!

@DarkSXDYT 3 года назад

Can you do a video on how to setup a Stratocaster tremolo pls

@guruofendtimes819 Год назад

TRUSS rod

@beauc.diamond7410 2 года назад

should i tighten the truss rod while strings are on? Mine is very tight and difficult to turn clockwise.

@MusicNomadCare 2 года назад

Yes you will want your string on, guitar in tune when making your truss rod adjustment

@seanrodrigues12 Год назад

What's the "pick capo" that you use to fret the E string with, can I use any ol' pick to do the same?

@MusicNomadCare Год назад

Our pick capo is thicker than standard picks. Designed to applies just enough tension and is easy to slip in without worrying about where it sits on the fret. You can use a regular capo but you need to make sure it is holding down the string directly on top of the 1st fret using the least amount of tension otherwise you will get an inaccurate reading.

@Travis_in_Florida 6 месяцев назад

Still confused what's a "pick capo" those are 2 separate things so I'm confused. I understand that yo hold down 12th fret and 1st fret without excessive pressure 👍❤️💯 great knowledge. How does sliding a pick in like that pushing the big string down enough

@spreadthehate Год назад

So as a left handed player, will the same rules apply? Or do i need to turn the truss rod the other way. Still waiting on my Martin D18, should arrive next month can't wait.

@MusicNomadCare Год назад

The same rules apply for left handed guitars.

@brandanleiter 2 года назад

So. I have this Martin X Series purchased in 2020. It has fret buzz from frets 11-13 on all strings. This started a month ago. I added as much relief as I could AND added some paper shims under the saddle. It got a lil better but still prevalent. I’ve a suspicion my 14th fret needs shaved down? Idk. I’m lost. Any advice would be tubular😞

@MusicNomadCare 2 года назад

The KISS setup method is based on doing all the steps in order and having level frets. For worn or un-even frets you will have to compensate for that until you are able to get fretwork done. To achieve clean notes and no buzzing without fretwork, you will need to raise the action until you achieve no buzz. More relief in the neck and higher string action can solve this but is harder to play and can lead to intonation issues. If you are having any of these issues, we recommend you take your guitar to a qualified repair shop.

@luxurybagel5857 Год назад

I put the allen key in but can’t tell if it’s in the right spot and it’s impossible to turn??

@MusicNomadCare Год назад

It sounds like your truss rod is stuck/frozen. Make sure your wrench is seated well and you may need to turn it counterclockwise to loosen the truss rod and then you can make your proper adjustment. If you have any additional questions or needs you can email our guitar tech at tech@musicnomad.com

@Pokey7317 2 года назад

Hey GREAT VIDEO. I have a Martin GPCPA4. I tried adjusting the truss rod and sure enough i damaged it. I turn it anticlockwise and there is no adjustment on the neck. I turned it clockwise until it cant go any further ( i heard a small crack( and no adjustment. I think i have to replace the Truss Rod. I have contacted Martin and no answer. Can you recommend a Truss Rod i can purchase? there is a local Luthier that can replace it for me as i dont have the tool necessary. I just need advice on what truss rod to buy. PLEASE HELP ME!!!!!!

@MusicNomadCare 2 года назад

You will need to talk with Martin or your go to repair shop. So sorry for the inconvenience.

@Pokey7317 2 года назад

@@MusicNomadCare Hey Thank you so much for your reply. If you had to make an educated guess, do you think the truss Rod on Martin's Website would work? I only see one truss rod they have on their website. My Martin joins at the 14th fret

@MusicNomadCare 2 года назад

We can not any recommendation on replacing a truss rod, this should be done by either the manufacture or a qualified repair shop who can physical elevate your truss rod situation give you proper recommendation. So sorry for the inconvenience

@persiaguitar 2 года назад

My Martin D10E seems to have a lot of neck relief . What is the factory default?

@MusicNomadCare 2 года назад

The Keep It Simple Setup we designed with seasoned repair techs suggests acoustic guitar neck relief at .008” is best. Reach out to the manufacturer if want to see what they recommend.

@persiaguitar 2 года назад

@@MusicNomadCare OK thanks I am happy with the overall sound and everything is fine but it looks like it has more neck relief than usual. Is it harmful to let it be the way it is? I am ok with overall sound and performance and as long as physically it does not bring any harm to the guitar I want to let it be :)

@MusicNomadCare 2 года назад

Once your guitar has been setup using the KISS method and measurements, you can dial it in from there for your specific playing needs. There is no harm leaving a bit of extra relief in your neck if the guitar plays and sounds good for you.

@mrcards169 8 месяцев назад

Don’t Martin recommend between 0.003 and 0.005 ?

@MusicNomadCare 8 месяцев назад

We respect the different ways manufacturers and repair techs approach neck relief. Our Collaboration with Master Guitar Tech Geoff Luttrell and his 20+ years, two high volume guitar shops setting up 10,000 plus guitars, teaching 100's of students in his setup workshops, in house Plek experience, plus we asked a handful of other top repair shops the most common setup measurements and this was the unanimous measurements for a a great sounding and playing guitar. We realize there are many different opinions plus these can dialed in more for the type of player and playing style.

@mrcards169 2 месяца назад

Thanks for the reply

@TheoDahlemPickups Год назад

Looks like you're fretting the 13th fret. I'm puzzled

@MusicNomadCare Год назад

Geoff is pressing down between the 12th and 13th fret so the string is fretting at the 12th fret

@TheoDahlemPickups Год назад

@@MusicNomadCare Thanks for clarification.

@markorfila3832 5 месяцев назад

The action on that Martin looked way too high !

@nikao7751 Год назад

So technically you are pressing down behind the twelfth fret, between the 13 and 12 fret on the fretboard, sheesh, 🙄 we need more names for the difference between the fret on the board and the actual metal fret, we also need the keep it simple stupid method 😉

@MusicNomadCare Год назад

He is pressing down right behind the 12th fret in between the 12th & 13th fret so the string is contacting/fretting at the 12th fret

@liferelation Год назад

He says fretting the 12th but he’s actually fretting the 13th fret . He means fret the 13th this places the distance halfway between at 6th just a verbal mistake

@MusicNomadCare Год назад

Hey Sonny, he is pressing down in between the 13th & 12th fret so the string is making contact on the 12th fret.

@joelh3544 Год назад

Dude, how did you not get this ?