HOW-TO: Motor Controller for NEMA Motors SMC01 with External Driver Part 3

Подписаться 1,8 тыс.

Просмотров 9 тыс.

50% 1

HOW-TO: Motor Controller for NEMA Motors SMC01 with External Driver Part 3
First Part: • HOW-TO: Motor Controll...
Second Part: • HOW-TO: Motor Controll...
Third Part: • HOW-TO: Motor Controll...
Fourth Part: • HOW-TO: Motor Controll...
In this latest part, talking about the NEMA controller, in particular the ZK-SMC01. This controller is designed to be connected to a Motor Driver, it has the main signals STEP, EN, DIR which allow us to use a huge variety of motors and motor drivers, for example NEMA 32 or even bigger...
/ onegeekguy
INTRO:
• HOW-TO: Motor Controll...
DRIVER SELECTION:
• HOW-TO: Motor Controll...
CONNECTIONS:
• HOW-TO: Motor Controll...
In case you want to buy the controller:
-SMC02 With Driver Incorporated
s.click.aliexpress.com/e/_DDd...
-SMC01 Without Driver
s.click.aliexpress.com/e/_DFO...
-XH 2.54mm Connectors
s.click.aliexpress.com/e/_Dd0...
-Nema17 Driver
s.click.aliexpress.com/e/_Dmd...
For the manual, you can find them here:
-SMC02 With Driver Incorporated
attach01.oss-us-west-1.aliyun...
-SMC01 Without Driver
m.media-amazon.com/images/I/6...
Any doubt, post it in the comments.
-----------------------------------------------------------------------
Music By Conaffelstein
/ nightcruiser
Song:
nightcruiser
www.supportify.ch/dl/?track=78144
-----------------------------------------------------------------------

Наука

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@user-id8ln5tz2t 15 дней назад

Дякую за освітлення багатофункціонального контроллера для управління драйвером крокового двигуна.

@dumbravatraian198 2 месяца назад

Hi there Nice presentation, but im wondering and go in circles because I don’t know how can do this , in this set up how can you add up for manual mode with mpg hand wheel encoder if want to turn manual ?

@philmorejeon 4 дня назад

Hi what other Driver's will this controller work with this? Will the DM542, I understood your explanation about the problem, but I don't understand which words I should look at in the description of products to know which Drivers are compatible.

@onegeekguy_yt День назад

DM542 will work, it has both ends of the inputs in the connector so no issue.

@torsiondell 4 месяца назад

Very informative video my stepper motor is 4 amps would I be better off with 01 or 02 controller

@onegeekguy_yt 4 месяца назад

If you want to always have 4A to the motor, I would go with the SMC01 and external driver...., till 3A it is Ok, at the end depends on the load in your motor.

@JAKWIRECUT 5 месяцев назад

This just use step controller. My machine use like this. Any function this fine for automation

@88pockets 10 часов назад

Great video! Very Informative. will this process work with the NEMA34 12NM

@onegeekguy_yt Час назад

If you use an external driver yes!

@88pockets 42 минуты назад

@@onegeekguy_yt will the driver and psu you used work with the Nema34

@onegeekguy_yt 25 минут назад

No, mine were for smaller nema, you need a driver and PS for Nema34 which are bigger/powerful

@torsiondell 4 месяца назад

Could you do a video on adding limit switches

@onegeekguy_yt 3 месяца назад

HI! There is a video explaining how to add end stops here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Sv1FYD_8-FQ.html

@hakimehanifegoren7507 2 месяца назад

Great video. What is the voltage of controller Dc+ and Dc-? Is it same as the driver 12 V, or not ?

@onegeekguy_yt Месяц назад

Does not need to be the same, but if you have already 12V from the driver you can use that.

@dja1640 Месяц назад

will Nema 14 with TMC2208 driver work with this controller?

@onegeekguy_yt 22 дня назад

Yes will do, no issue.

@torsiondell 3 месяца назад

Hi I have another question, I have decided to use a separate stepper driver but can I remove the driver from the ZK-SMC 02 and just use the controller? Effectively turning it into a 01.

@onegeekguy_yt 3 месяца назад

Yes you can, if you remove the driver from the SMC02, you will see a SMC01 but without the main connector, you just need either to solder the connector or solder the cables directly like if would be SMC01....

@torsiondell 3 месяца назад

@@onegeekguy_yt much appreciated many thanks

@puun5991 6 месяцев назад

Hi is there anyway to put my own sensor as a stop button?

@onegeekguy_yt 6 месяцев назад

Hi! Yes! I am working on an extra video showing how to use external switches as endstop. Will be ready in one week!!

@chanchalsakarde2768 5 месяцев назад

how to control steps movements, like lets say we have 400 circular points to move one by one and i need to move pointer in following example sequence starting from 0->10->240->45->28-> .......... -> 400 . How can we automate this ..

@JAKWIRECUT 4 месяца назад

Motion control cines