How To NEVER FAIL at a Tubeless Install - No Compressor Needed

Подписаться 53 тыс.

Просмотров 11 тыс.

50% 1

#tubeless #mountainbike #howto
Buy The Best Tire Lever Here : Red - amzn.to/3Cz4INY
Blue - amzn.to/43JbbBI
Pick Up a Shirt or Hoodie Here at the Merch store:
Swag: runbikemike.my...
Thanks for watching:
I hope you enjoyed this and will come back for more.
Become a Member and Help Out My Channel: / @runbikemike
Follow Me @: www.RunBikeMike...
Swag: runbikemike.my...
Popular Playlists:
Mountain Biking Playlist: tinyurl.com/4r...
Walnut Springs Playlist: tinyurl.com/yb...
All links are Affiliated. No extra charge for you but by using them you help out the channel.
Convert Your Bike to TUBELESS Using Only a Hand Pump - No Compressor Needed
Tubeless conversion, tubeless bike, bike tubeless, how to go tubeless, mtb tubeless, no compressor tubeless, tubeless with only a floor pump, tubeless pump, going tubeless on a mtb,can you put on tubeless tire with floor pump, install tubeless without compressor, tubeless no air compressor, install tubeless without an air compressor, how do you install tubeless tire without compressor

Развлечения

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@RunBikeMike Год назад

I hope you found this video helpful and will subscribe for more fun content.

@renau001 9 месяцев назад

Was really struggling with a stubborn tire. And this video saved the day. Thanks!!

@andrewsiasparks Год назад

That's really impressive. Definitely good in a pinch 👍

@thegherkin469 9 месяцев назад

Thanks so much for this. First time replacing a tubeless tyre myself today (Ground Controls) and it worked a treat. I found just going about 1/4 of the way round the rim on each side was sufficient in my case (with a floor pump). Cheers!

@alexgrabner116 8 месяцев назад

Great video! Was about to go on amazon and get an air compresser! I just went tubless and was not having any luck with my foot pump, just spraying sealant on the foor. Setting the bead was a game changer.

@woodsdavid2887 7 месяцев назад

Thanks so much for this video. I just got this to work on a road bike tire. Much obliged!

@ahlekszandr33 Год назад

It was a long hard battle…. But I’m too stubborn to quit and finally got it to work. Thanks!

@RunBikeMike Год назад

Awesome!!!

@MTBQandA Год назад

You amaze me with your patience and how well you describe everything so well. Such a great video. Not sure you meant for this to be ASMR but gosh darn it is😅!

@Asijantuntia Месяц назад

Good idea! Unfortunately it only works with wide rims and/or tight tires. Tried it with floppy 50mm tires that you can get on the rim with your bare hands, and this method was hopeless.

@jonmultimedia 10 месяцев назад

You could also inflate the tyre with a tube to pop all the beads in. Open one side, take tube out, and do this process just on that open side. That's what I do at least.

@RunBikeMike 10 месяцев назад

Very clever 👍🏻

@jonmultimedia Месяц назад

@@jackburton2680 what do you mean? You just take the tube out, including the valve, put the tubeless valve back in and inflate to pop the beans of that side without worrying about the other side

@root_node_productions Год назад

Amazing tip!

@mrupholsteryman Год назад

Well..I spent a LOT of time with an air compressor assuming it would be able to blow the tire out to the rim...but I was sorely mistaken ...and then I kicked over the Stan's Tubes goop onto the floor...and it was a lesson learned that I had to know that I was not as skilled as I thought I was.

@RunBikeMike Год назад

Oh no. It happens to the best of us.

@youabsolutelegend1265 8 месяцев назад

I also wipe/spray soapy water onto the tyre bead.

@msumacc22 Год назад

That’s incredible

@rommelreyes2209 Год назад

Excellent but i would recommend to at least borrow or buy a floor pump for your own sanity.

@spudswatersports 10 месяцев назад

Great video. On trail with tubeless sealant already on it. I really struggled to get the beads to stay in place. Should I forget that as needs to be dry? It kept kinda sliding off while I was using the leaver. Cheers Mike.

@RunBikeMike 10 месяцев назад

With sealant on it, it is a lot harder to reseat. One thing I recommend is only remove one side of the tire if possible. That way one side is already seated. Then try to reseat the other side. It can be tricky but is possible.

@majorbadidea Год назад

I have a wheel waiting in the hall to be taken to a bikeshop after failing to pump any air in it. Will give this a shot tommorrow if no bikeshop has time for mw

@RunBikeMike Год назад

Let me know if you try it out.

@majorbadidea Год назад

@RunBikeMike in the bike shop, they also struggled until realising my tape was 2 years old. Took of old tape and put new one on. Then they managed to get air in, but now it's deflating quite fast. I'm thinking of adding more sealant

@RunBikeMike Год назад

@igorlacik5726 yeah bad tape can make it almost seem impossible.

@lesterfalcon1350 Месяц назад

I cannot get the beading to stay on the edge to work on the 2.6 Hans Dampf, If you ever try this on your polygon I'd be interested to know. I have the T8, so the same tyres and wheelset. My thumbs now need a break

@lesterfalcon1350 Месяц назад

Took a break came back to it, success, with a mini pump too. I tried the motocross cargo strap technique. Put the strap around the circumference of the tyre, pull it tight to compress the tyre. this helps push the bead out. I think it may also help with pumping, due to the reduced volume. Then with a thump on each wall pull the beading out til it seats as well as you can, get it as tight as you can. Then pump. If it not inflating see if the bead is not quite right somewhere work your way around the whole tyre with both thumbs working ware from each other. And pump again. Once it has enough pressure, remove the strap and fully inflate.

@jackburton2680 Месяц назад

I have those same tires and this method is impossible by my experience. The bead simply doesn't stay in place as I work around the tire.

@lesterfalcon1350 Месяц назад

@@jackburton2680 Did you see my follow up comment about using the motocross cargo strap method. I've now seated my tyres 3 times this way (Front I redid and the back once), And it went smoothly all three times. That was after about 3 hours trying all the other hacks.

@jackburton2680 Месяц назад

@@lesterfalcon1350 I did. Don't got such a strap laying around though. I'll prob just seat one side by inflating it with a tube installed, then pull tube out and hopefully reseat it fully.

@lesterfalcon1350 Месяц назад

@@jackburton2680 Strap I used was for rings, so not really that wide. If your inner tube method fails (did for me) then maybe rope or cord wrapped around 2-3 times would substitute for the strap.

@Sir-Kay 7 месяцев назад

Sorry to say but, this only work in ideal situation like yours - having a relatively new tire. Now, try the same ish with a tire that has gone on & off the rim a few times & with old gunked up sealant on the entire circumference of the edges of the tires, then we can talk.

@RunBikeMike 7 месяцев назад

Yeah you have to have a clean bead and rim for it to work.

@Sir-Kay 7 месяцев назад

@@RunBikeMike I would say though, your levers are strong, the lil plastic ones I got would have broken if I tried your trick with them. Great video by the way.