No video :(

HOW TO OHLINS SUSPENSION SET UP GUIDE RFX38M.2 & TTX22M

Подписаться 658

Просмотров 20 тыс.

50% 1

Hi there!
Here’s a base set up guide for your Ohlins Suspension RFX38M.2 Forks and the TTX22M Coil Rear Shock.
Once set up get out and ride and fine tune to your requirements.
Hope this helps and any questions please don’t hesitate to ask.
Please like and subscribe.
Live To Ride

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@rider65 7 месяцев назад

Good stuff. I usually bracket the settings then slowly adjust for a specific trail or type of ride. I had a RFX 36 air on my Fuel 8 a few years ago. A great fork all around, especially on the bigger bumps and hits. Slow speed not so much. But I hear the M.2 version are much improved on the low speed compression end. Great setup on the bike. 👍

@ryandodgeshaw 7 месяцев назад

I've had a good amount of time riding these forks and have only tweaked the rebound for different tracks. I have gone up in pressure in the main chamber but staying pretty consistent in the ramp up so far. It's certainly an improvement over my previous bike setup. Cheers!

@berniecolin7 2 месяца назад

Very helpful!

@ryandodgeshaw 2 месяца назад

Thank you ✌️

@harrisonpescarini Год назад

That was so handy thank you 👍🏻

@ryandodgeshaw Год назад

Thank you! Glad to help

@simonedeb 10 месяцев назад

Hi, thanks for this video. I only miss 1 piece. Which is the starting point from where you start to rotate the spring? Just when the plastic o ring with the screw touch the spring, then you start to rotate how much is needed?

@ryandodgeshaw 10 месяцев назад

Hi there. Give the spring no more than 2 full turns to set the sag. If you need more it will need to be a heavier spring rate to achieve the correct sag. Hope this helps? Thank you for watching.

@simonedeb 10 месяцев назад

2 full turns from which starting point?

@ryandodgeshaw 10 месяцев назад

@@simonedeb Check the sag before you turn the spring. Aim for 30% sag and adjust harder or softer to suit. Use the logo on the spring as a guide for how many turn you do. Hope this helps

@simonedeb 10 месяцев назад

@@ryandodgeshaw excellent thank you so much for your explanation

@xLordSpicy 28 дней назад

Didnt you just fully close the HSC?

@arnfal3728 День назад

Yes he is in fully closed position ( position 0)

@samhill3496 11 месяцев назад

Good vid simple. what kind of air pump did you use?

@ryandodgeshaw 11 месяцев назад

Hi there. I have a Rock Shox digital gauge. Thank you

@mean0B 9 месяцев назад

Hey Ryan, this is a little late, but I bought a pivot with ohlins but the suspension was set up for 100kg rider and im 65, so I need to release air. Is it the same process as in, release air in ramp up (bottom) chamber, then release air in top, then equalize. Cheers

@ryandodgeshaw 9 месяцев назад

Hi there! Nice!…Release the air from the main chamber then the ramp up and start over. Set the ramp up chamber first then the main. Hope this helps?

@mean0B 9 месяцев назад

@@ryandodgeshaw Ok, so just reset it to empty and do it normally. Cheers man, appreciate the quick reply even after 7 months haha

@ryandodgeshaw 9 месяцев назад

@@mean0B Treat it like it's never been set up. You won't be disappointed, the forks are amazing. Ha yeah I was up early today! Cheers!

@mean0B 9 месяцев назад

@@ryandodgeshaw Alright, thanks man, you have a good one

@monzzi2923 6 месяцев назад

What kind of mud guard do you have mounted on your fork? Thanks

@ryandodgeshaw 6 месяцев назад

It’s a Mudhugger. www.themudhugger.co.uk/collections/front-mudhugger-mountain-bike-mudguards/products/mudhugger-evo-bolt-on?variant=37431382048942

@cdwag23 2 месяца назад

How much psi in the fork would you go up for a full power e bike?

@ryandodgeshaw 2 месяца назад

Depends. Get to 30% sag is a good start.

@richcain5127 6 месяцев назад

Where did you end up with rear sag on the meta sx?

@ryandodgeshaw 6 месяцев назад

Hi! I've got it at around 30% but I am in the middle setting for compression, so have been advised by ohlins to think about a 433LBS spring as an option.

@kap10bob Год назад

Cool thanks

@ryandodgeshaw Год назад

No problem glad to help

@nothinglessness Год назад

Do you start out with zero air in any chambers? Then inflate? If so in what order should I deflate?

@ryandodgeshaw Год назад

Hi there. When I first got the forks it had no air. You have to pump up the ramp up chamber first before the main chamber. When I’m checking I always check the ramp up first then main after. Hope this helps

@przygodyzmtb 9 месяцев назад

@@ryandodgeshaw Why is that important to pump ramp up first? Also any ideas how to dial the fork to have better small bump sensitivity and work faster on rough stuff? Should I lower the air pressure, add ramp up and lower rebound?

@JIBBING_1980S Год назад

How much$ both fork and shock?

@ryandodgeshaw Год назад

Check with your local bike shop, if they don’t get them go directly to Ohlins.

@rider65 7 месяцев назад

Typical price for the Gold Swedish fork is 1100 to 1500. Shock around the same, 1000 to 1200. A good sale could get you both for probably 1500. But you'll have to be lucky and comb the internet. Plus, you likely do not need 38mm stanchions. 36 is Plenty for stiffness and durability.