How to open 3rd gen 4runner rear hatch from inside if necessary.

Подписаться 4,3 тыс.

Просмотров 38 тыс.

50% 1

Opening a stuck shut rear hatch
@funjunkiegarage
www.etsy.com/shop/RAKandSAKart
throneofiron.bandcamp.com/
#toyota4wd #doitdamnit #Funjunkie #myhappydriveway #toyota #alwaystoyota #ohwhatafeeling #tundra #tundralove #lovemytundra #tundraoffroad #tundraoffroad4x4 #toyotatundra #toyota4x4 #yota #sr5 #teamyota #overland #offroad #tundramafia #teq #1stgenTundra #2uz #2uzfe #toyotafreaks #toyotalife #tundra4life #tundralife #stellarbluepearl #tundraadventures#toyota #alwaystoyota #ohwhatafeeling #4runner # #toyota4runner #3rdgen4runnermafia #4runner4life #4runneroffroad #toyota4x4 #toyota4wd #yota #sr5 #teamyota #overland #adventure #offroad #explore #teq #3rdgen4runner #myhappydriveway #Funjunkie #doitdamnit #toyotafreaks #toyotalife #lovemy4runner #5vz
#toyota #alwaystoyota #ohwhatafeeling #Tacoma # #toyotatacoma #Tacoma4life #Tacomaoffroad #toyota4x4 #toyota4wd #yota #teamyota #overland #adventure #offroad #explore #teq #1stgenTacoma #myhappydriveway #Funjunkie #doitdamnit #toyotafreaks #toyotalife #lovemyTacoma #3rz
Toyota,4wd,1st gen,3rd gen,4runner,Tundra,T4,Funjunkie,White,Blue,offroad,off,road,adventure,fun,camping,towing,install,mods,modifications,overland,rig,4x4,build,homemade,DIY,fab,fabricate,project,wheeling,welding,armor,sliders,skids,skid plate,boatside,bumpers,lift,lifted,bumper,locker,lockers,IFS,double locked,lift,lifted,4.88,4.88s,5100s,Bilstien,limited slip,airbags,Red,Tacoma,3.4,5vz,4.7,2uz,wheelin,enjoy,

Авто/Мото

Опубликовано:

10 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@jamiebarrette3630 4 года назад

First time ive heard of ecgs bushing, good to know. Thx. Happy trails!

@kokadjooutdoors620 Месяц назад

Dealing with this now thanks for the tips

@funjunkiegarage Месяц назад

Right on. Hope it all goes (went) smoothly. Thanks for watching and commenting.

@kokadjooutdoors620 Месяц назад

@@funjunkiegarageit did! Clip on latch rods to the right had slipped. Lined them back up and slid it back. Latch worked and was good to go

@funjunkiegarage Месяц назад

Awesome! Thanks for the update.

@johnfroehlich3467 Год назад

Thank you! Very helpful. Would have been lost without this video.😅

@funjunkiegarage Год назад

You're welcome. Always happy to hear I've helped. Thanks for watching and commenting.

@nameyourchannel7844 4 месяца назад

Much appreciated man!

@funjunkiegarage 4 месяца назад

You are absolutely welcome. Thank you for watching and commenting.

@itztarheelzzx2915 3 года назад

Dude I have a 97 I’ve had this problem for ever man thank you 🙏🏼

@funjunkiegarage 3 года назад

Thanks for watching. Awesome it helped! Appreciate it.

@stb1815 2 года назад

Very helpful thank you

@funjunkiegarage 2 года назад

You're welcome. Thanks for watching and commenting!

@richmanxd Год назад

you saved me from getting a ticket. Grateful for your help sir!

@funjunkiegarage Год назад

Awesome! Happy to be of service. Thanks for watching and commenting

@harrison_stone 4 года назад

Thanks man!

@funjunkiegarage 4 года назад

You're welcome. Thanks for watching.

@MichaelHoks-rq6rk 8 месяцев назад

Thank you!

@funjunkiegarage 8 месяцев назад

You're welcome. Thank you for watching.

@twomedicine 6 месяцев назад

Thank you!!

@funjunkiegarage 6 месяцев назад

You're welcome.

@camf33 5 месяцев назад

Will this method of disassembly work to replace the lock too?

@funjunkiegarage 5 месяцев назад

Yes it will. After you get it open the latch unbolts from the bottom. The lock cylinder is held on with a slide clip. Hope this helps Thanks for watching and commenting.

@levydan4370 26 дней назад

Thanks.

@funjunkiegarage 26 дней назад

You're welcome. Thanks for watching and commenting

@levydan4370 25 дней назад

My hatch is operable but wanted to find out how to lubricate it. Thanks again.

@funjunkiegarage 25 дней назад

@levydan4370 with the plastic trim panel off and the metal panel removed you can get to the latch assembly and all the window workings as well as the window run channel. I'd also spray lube into the latch from outside (hatch open) Hope this helps, let me know.

@levydan4370 25 дней назад

@@funjunkiegarage keep you posted. Thanks.

@bryangarromonge4327 2 года назад

Thanks

@funjunkiegarage 2 года назад

You're welcome. Thanks for watching.

@marlenaharp7469 2 года назад

This was so helpful thank you!

@funjunkiegarage 2 года назад

You're welcome. Glad it helped and thanks for watching.

@marlenaharp7469 2 года назад

I am having issues with the rod and the cable to work together do you have and advice on how to fix or replace those parts?

@funjunkiegarage 2 года назад

The latch can be removed from the hatch, if it's frozen it's easy to free up when it's out. The cables come out with the latch and connect to the key cylinder. The rod goes to the outside handle. That can all be lubed up or removed with the glass up Hope that makes sense and helps If all those pieces are able to be freed up and operating properly you should have a working hatch. Best of luck, let me know how it turns out.

@johnjames77 2 года назад

I disconnected the battery and that was what caused mine to not open. Somehow the latch is tied to the power . Not cool...

@funjunkiegarage 2 года назад

I did not know it had to have power to open.

@aleasharowe2551 8 месяцев назад

Does anyone know how to do this to a 2011?

@kf3en 3 года назад

You have to lift the plastic panel to pull it out of the window. In that state, do not roll the window down, as it can get scratched.

@funjunkiegarage 3 года назад

Appreciate the tip. Thanks for watching.

@bohemian46 3 года назад

What did you do to prevent this from happening again ?

@funjunkiegarage 3 года назад

I lubed it real well and worked the latches (while apart) to free things up.

@chrisariasnow 2 года назад

I'd like to create something that makes opening the hatch from inside a breeze. Do you know of any product like that?

@funjunkiegarage 2 года назад

There was one I saw on Facebook a while back. There are some other videos that show some ways to do it. I was gonna put in an electric release, but don't see a need for it. Here is a link to one guys method. Thanks for watching. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oARdyLbogIQ.html

@chrisariasnow 2 года назад

@@funjunkiegarage Thanks for posting and thanks for the suggestion. Take care.

@TacticalLeo 2 года назад

I got rear ended back in September last year and my rear has been dented and shut in. When I can I’m gonna attempt this and see what happens. Worse comes to worse I gotta take it to an auto body shop…

@funjunkiegarage 2 года назад

Sorry to hear you got rear ended. Hope everyone was ok. And I hope this helps get your hatch open. Best of luck. Thanks for watching

@TacticalLeo 2 года назад

@@funjunkiegarage thanks man! Thankfully I was the only one who was in the 4runner at the time as I was coming from my college campus… If you go check my channel out you can see the video I posted from my dash cam from that day… Bums me out every time I see it since I’ve been driving this 4runner since my highschool days (since 07)

@funjunkiegarage 2 года назад

Send me a link to your channel

@TacticalLeo 2 года назад

@@funjunkiegarage sure here you go! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Pyonx9tZ2Ic.html

@funjunkiegarage 2 года назад

Subscribed

@ziggyzags13 3 года назад

Hmm, interesting. I’d like to have something to pull that latch from the inside. Instead of climbing out of back door when camping

@funjunkiegarage 3 года назад

Thanks for watching. I have that in the works. A video will be up afterwards. There are a couple kits available, but I'll show how to do it without a kit.

@ziggyzags13 3 года назад

@@funjunkiegarage nice, can’t wait

@justinriekena4230 Год назад

@@funjunkiegarage you ever complete this

@funjunkiegarage Год назад

I did not. I worked on it for a bit with a plan to do it but I never followed through. There are a couple kits available that are simple and easy to install. My idea of an electric switch was much more complicated. And there are 4 different wire harnesses depending on what year 4runner you have. I just felt it wasn't a good idea to proceed. I don't currently have a rear hatch to work with. If you google it you can find the cable pull method, which is quite simple, but not my idea. Hope this helps.

@johnjames77 2 года назад

I have lost all respect for Toyota. No more ever again

@funjunkiegarage 2 года назад

Bummer, what happened?