How to open and install valves, valve seals, templars or valve locks, camshafts for the type of motorbike Yamaha X Ride, Mio J, Mio M3, Soul GT, Xeon. The steps we have to do are: 1. We just need to remove the valve boss pen using a screwdriver and pull it out. 2. Remove the two templars or the valve plate. 3. Press the top end of the valve stem with the valve stud nails using a 12 T key or whatever and press simultaneously so that you are shocked so that the two valve stud nails are released. 4. Open the valve and seal the valve using a screwdriver atang pliers. 5. Remove the camshaft by using a fine 12 bolt and pull it out. 6. For the valve skirt, use emery and make sure it is smooth and doesn't leak when we check using gasoline. 7. Reattach all the components on the cylinder head as we removed it. And additionally, when installing the valve studs, we use a wedge at the bottom of the valve umbrella to hold the valve. Thank you very much to all viewers and subscribers, I hope the knowledge is useful. Please subscribe @SidikNuryaden If you have questions, please write in the comments column. Thank you very much.
9 сен 2024