Hey sir im doing what your exactly doing but it changes in bios and still throttling in desktop voltage and frequency keeps changing what can i do please help
i made the same with a ryzen 2200g and get it up to 4.20gz but i dont feel like it's running that speed. and the ryzen never gets more than 3.8gz. tell me your experience.
GIGABYTE APP Center - Easy Tune does it much easier just set ram up to 3200mhz xmp profile 1 and save with the 2200g/2400g and can auto overclock just remeber to click save changes.
Did get this to work on the same motherboard, however, it's only reported in Task Manager. The CPU still won't overclock past this. Try a Cinebench run, scores will be the same.
Do you have the "v2" version or the normal one without "v2"? because apparently only the v2 version allows overclocking, please let me know what version you got.
Hey i got a question. I have the same board as this one. Ryzen 2200g 8gb single stick ram 2400 gtx 1050. When i open up task manager under ram mine shows 6.9gb usable 1.1gb hardware reserved. Do you know how to free up reserved ram? 1.1 gb us quite a lot. Reply much appreciated! Subbed!
same parts excepet i have rx 580 8gb also have a single stick ram they say we need to get another stick for dual channel memory and it makes a lot of difference, but one 8gb stick cost a lot
Sorry peeps it may change the base clock, but the overclock doesnt work. Jus turn on cpu boost and you will get 3.7 when u plays games, its decent. I repeat the cpu overclock does not actually work, but at least u can overclock your ram
Bro i have a problem..i just bought 2200g & gigabyte a320m s2h mobo today..i installed amd chipset driver(downloaded from gigabyte support) and then automatically restarted & then no display. Windows doesnt boot.why?
@@AGENTNOVA13 hello mate i bought gigabyte a320m-s2h from amazon for 44pounds and its doing great it was with bios F40 Already installed I have same cpu
It is unstable on my motherboard i works at first but when i reboot it crashes my windows any help will be appreciated. (Boosted to 3.70 ghz and ram to 2666 mhz from 2400)
same lumalabas ireset sa default setting un bios para mag boot minsan ttry ko ulit naka ryzen 2200g and rx 580 na ka disable na nga ung igpu na vega e dapat may headroom pako sa temp
@@SpeeDeaD747 Ah ok, quería saber nomas porque quiero comprarme esta mother (la v2). Al parecer la única que permite overclock es la v2 porque tiene el chipset b350, la comun "v1" tiene el a320, eso es según lo que leí por internet.
bro thanks for your comment I was about to do it to my system but I forgot I also upgraded my bios to f40, I think you should try clearing the cmos again or switching the ram to a different ram slot.
The same happened to me, ga 320m with the latest bios with R5 3400G. It went on a bootloop when i enable xmp profile or the ram set more then 2600hz. The new version of the bios is unstable.
Hey man i hope you can help me out, i have the exact same motherboard as you. Is it possible to put in a 8GB RX 580 Graphics card? I have the Ryzen 3 3200G processor with integrated Vega 8 graphics installed. Alongside that i got 6GB of RAM. Stock clocked!!!
@@therealeselwurst1087 I don't know much about overclocking, but I've recently seen a solution to this problem. It was like "pull out the BIOS battery for 20 minutes to reset the settings." Try to find detailed instructions
Bro, this is not overclock. I tryied it and nothing happend only the base speed changed but the actual speed when running at cinebench was 3.1ghz as I got r3 1200 and it did not hit any actual speed over the stock. That is not overclock...
A320m-s2h bayan yung original version, Or baka yan yung v2 kasi Naka b350 chipset yun supported talaga ng OC pero not recommended kasi walang heatsink ang VRMs baka mag Overheat.
@@luizcarlosribeiro363 I updated my bios for another version to F24, and even then the options of overclocking, memory multiplier are inactive, do not appear. I do not know what it can be :(
@@QUICKEASY Thanks, I knew that but I always press it when the message Restard boot media shows up. the trick is to mash it as soon as you turn on the pc
@@SillyLifterss tignan mo nlng kung babagay sa chipset mo brad kung a320 gamit mo tas ryzen 3 or 5 gamit mo ng processor cguro gtx 950 below or rx 450 mga ganun pede na.
@@haxzaw8550 Yeah, easily but still check the VRM temps are not higher than 110º on heavy load. Use AIDA 64 for the stress test and HWinfo for the VRM temps.
@@Ilegator ok well I just wanted to know because I bought this board like a few days ago and have already put the cpu and ram in it I'm actually pretty excited I'm upgrading from a i5 2400 at stock speeds no overclock
